Startup Wizard

Jan 4, 2006

How do I setup a STARTUP WIZARD in EXCEL which allows user can input information, and these information will be stored in the excel worksheet automatically.

The startup wizard is defined as a window which will pop up automatically when you open the Excel document. The wizard contains forms.

View 9 Replies


ADVERTISEMENT

At Startup .xls Doesn't Open At Startup Any Longer- 2007

Apr 25, 2008

I use Excel 2007 and I have an .xls that I've had set to auto-open at startup and has worked fine for months now. Alll of a sudden a couple days ago it stopped auto-opening, and I have to now manually open the .xls. I looved in the Advanced>At Startup setting and it's set to the correct folder. What other setting in Excel 2007 do I need to check that would be causing this startup problem?

View 9 Replies View Related

Conditional Sum Wizard

Jun 30, 2009

I'm using the conditional sum wizard to gather the cost of some projects based on two other conditions:
Column 1 is Country
Column 2 is Cost
Column 3 is Category

I have sucessfully used it with several countries but after sucessfully returning the correct resultsa for 5 countries it says "The formula you are building is too long. Please specify fewer conditions" - The amount of conditions is the same as the sum just before it which worked fine!!!

View 9 Replies View Related

Dupe Wizard 400

Feb 16, 2008

I have the dupe wizard add on, on my excel program. I am wondering why when I click on the Dupe Wizard button a message in a dialog box pops up saying 400. The Dupe Wizard application will not do it's job now, only the dialog box saying 400 pops up.

View 3 Replies View Related

Text To Columns Wizard - Stopping It

Jun 2, 2009

I am getting frustrated with the Text to Columns Wizard. After using it once on a spreadsheet, it continues to opperate whenever I paste.

Is there a way to stop it from automatically converting text to columns when I paste?

View 5 Replies View Related

Formula For Conditional Formatting Wizard

Nov 25, 2009

I am trying to create a formula in the Conditional Formatting wizard.

I would like the formula to format B2:F2 in a particular way if a count of the number of values in this range equals 5 AND if all values are less than or equal to 25.

I have tried with following formula without success:

=IF(AND(COUNT(B2:F2)=5),COUNTIF(B2:F2,”<=25”)=5),””))

View 7 Replies View Related

Reset Defaults For Import Wizard?

Apr 14, 2013

Is there a way to reset the defaults for the text import wizard? I occasionally import a number of files in CSV format, but the wizard defaults to tabs as the means of separating the text. I would like to reset the default on the second page of the wizard to commas, not tabs.

View 3 Replies View Related

Import Text And Bypass Wizard

Feb 16, 2009

I am trying to write a Macro that will alow me to choose a text file to important but bypass the Import Text Wizard when doing so. I used the record macro function to get this

View 4 Replies View Related

Import Textfile WITHOUT Showing Wizard..

Sep 15, 2009

I am using this code to import txt documents, but once the file has been selected and everything, the excel data import wizard shows up... I now would like to get rid of this problem, as well add a standard path to this code, so that I dont always have to start from the desktop and click through tons of folders to get the folder containing my files.

View 12 Replies View Related

Save Settings Wizard For New Computer

Jul 25, 2008

I was reinstalling office on a laptop where the hard drive had been replaced. I used the 'save settings, wizard on my desktop and put in the new settings when I reinstalled Office.

This almost worked, but not quite.

Word and PowerPoint seem to be fine but when I reopened Excel I got a number of messages saying that objects could not be loaded because they were not on the machine. Some of this was because Excel was trying to reference add-ins that needed to be reinstalled. I have done that, and there are now fewer messages - but there are still two and I can't get rid of them. One looks for 'objects' the other a single 'object'. There seems no way of finding out what the objects are in question, and what it that Excel is stumbling over. Can I do anything other than abandoning my previous settings and starting again, or else living with having to click twice every time I start excel to get rid of the messages?

I have tried uninstalling Excel and reinstalling but this doesn't help. Perhaps registry changes are the problem...and I hate the registry.

View 9 Replies View Related

Paste With Text Import Wizard In VBA

May 3, 2006

I am pasting query results from WinSQL into Excel and use 'Paste' and then, from the little Paste Options icon, 'Use Text Import Wizard'. I choose tab delimited and then reset the decimal separater using the 'Advanced' button on step 3. Since I do this daily I would like to create a macro to do it all for me, namely paste what I have already copied to the clipboard using the appropriate settings. Recording doesn't reflect the steps I executed. How can I call the text import wizard from vba with the clipboard contents as input as opposed to a text file?

View 5 Replies View Related

Calling The Pivot Wizard From A Form

Feb 9, 2007

I'm wondering if it's possible from a button placed on a userform to call the pivot wizard and then create a pivot table, which is then saved and imported into my form ??

View 8 Replies View Related

Advanced Search Form Within My Wizard

Apr 20, 2007

im building a user registration form in excel
now i realy would like to have a search form within my wizard but
i cant get it done.
i have read some other articals relating to this but they dont do
multiple field search (like day of birth and telephone numbers etc)
the form i would like to have should do a search for exmp. by phone number but than also displays all other corresponding user info in the results

the xls file included has some advanced features like automated building of commandbar menu's and has mailing features (currently quoted out) + build in timer events + on close auto save + allot.

View 9 Replies View Related

Show / Hide UserForms Wizard

Dec 17, 2007

I have created several userforms within my excel spreadsheet and i want to be able to click a command button on one form which will then hide the current form and show the next form. In previous spreadsheets i have used the following:

Private Sub CommandButton1_Click()
Form1.Hide
Form2.Show
End Sub

However, i am having trouble with this spreadsheet as when i am typing my code after the Form1. the hide command (and show) does not appear in the little pop scroll bar that predicts what command you plan to use. (If i type it regardless then it doesnt execute)

What is even stranger is that if i write a sub routine in a module such as:

Sub Test_Form()
Form1.Hide
Form2.Show
End Sub

And then call it:

Private Sub CommandButton1_Click()
Call Test_Form
End Sub

View 5 Replies View Related

UserForm Multi-Page Wizard

Mar 18, 2008

i'm trying to build an app that'll take a user through 5 or 6 steps of a process, with maybe 2-3 substeps in some steps. right now i'm currently using a multipage Userform , but all the tabs make the whole thing look cluttered (even when there's a "Next" button in plain sight). this is especially because i've put each substep as a multipage form under that step's page (multipage forms inside a multipage form). so steps 1-5 would each have their own pages (1-5), then in page 1 you'd have another multipage form (1.a. - 1.c.). is there a way to make it look simpler? i'd like it to look a bit like a Wizard (ie remove all the tabs), but the only way i can think of is to throw a whole heap of controls on one page, and turn them visible/invisible each step of the way.

View 4 Replies View Related

Automatic Pop-up Upon Startup

Jun 1, 2007

I would like to create a pop up message that would automatically come up when someone opens one of my Excel workbooks. Essentially, I want to have some text regarding the confidentiality of the document, then require the user to click an "OK" button to continue.

View 9 Replies View Related

Wizard Required: Consecutive Count And Countif

Feb 25, 2007

I have a table of data as below recording daily foreign exchange rates.

Column A = Time and date
Column B = USA
Column C = UK
Column D = Aust.
Column E = Japan
Column F = Euro

Time and date USA UKAust.JapanEuro
04-Jan-20060.68390.39180.924379.470.5693
05-Jan-20060.68660.39050.918779.720.5666
06-Jan-20060.68710.39150.919579.720.5675

Then in column H i have a formula that works out if the rate has exceeded a specified base rate, if it has i display Threshold Exceeded and if it hasn’t i display No Action Required.

OK from here i want to count the number of times in the month the Threshold has been exceeded. I can do this by using the countif formula.

Now this is the section i need help on

For a specified time, say a month, i want to count the maximum number of times the Threshold has been exceeded consecutively.

E.g

Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
No Action Required
No Action Required
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded

Result = 5 (max number of consecutive Threshold Exceeded” for a specified time frame)

View 9 Replies View Related

Formula In Certain Cell At Startup

May 14, 2014

I have excel file with Sheet1,Sheet2,Sheet3, etc

I want to activate below as soon as in go to Sheet1.

When I press Sheet1 tab, i would need to make sure that Cell A2=Today()-1 Formula

If A2 is something different then change A2=Today()-1 Formula

View 2 Replies View Related

Display A Window In Startup

Oct 11, 2009

Would anyone be able to tell me how to display a promp at an excel workbook startup so that users agree to the terms and conditions?

View 4 Replies View Related

Stop Calculations Upon Startup

Nov 25, 2009

when I powered up my workstation, the workbook has reverted back to calculating upon startup. I have provided a sanitized version of the workbook. I think the issue with the calculations during startup may not be apparent to you due to your inability to access the Access database this workbook extracts data from. I attached a test database which should hopefully work correctly with the workbook to demonstrate the calculation issue. Extract and save the test database in c:emp. That is where the workbook import queries will look for it.

The live workbook is much larger and on a remote server so the calculations take a lot longer than what you might see here.

View 4 Replies View Related

Detect Key Press Upon Startup

May 27, 2007

Is there some way to detect that a key (specific or any) is being pressed when an Excel workbook is being opened to activate optional precessing in the macro code?

View 9 Replies View Related

Launch A Userform During Startup

Nov 13, 2006

I am trying to launch the userforms with the below codes during startup(that is when you click the excel file, the userform will automatically pop up).
Please, Can somebody guide me through ?
Compare_Map is a subroutine which is to be called when optionbutton3 is being selected.

Private Sub OptionButton1_Click()

End Sub

Private Sub OptionButton2_Click()

End Sub

Private Sub OptionButton3_Click()
Call Compare_Map
Exit Sub
End Sub

View 3 Replies View Related

Chart Wizard Limited To 6 Rows Of Data For Series

Nov 24, 2009

I am trying to create a line graph and I have 17 rows of data for 17 different employees. There are 18 rows when including the header row.

My data is as follows

Column A - Employee Name
Column B - Month 1 data
Column C - Month 2 data
Column D - Month 3 data
Column E - Month 4 data
Column F - Month 5 data

When I highlight the data and go to the chart wizard, I select "Series in Rows".

However, on the series tab it only brings in the data for 6 employees.

Is there a way to automatically bring in all the data without having to do it manually, or is this a limitation of Excel?

View 9 Replies View Related

Option To Not Run Macro On Startup With Timer

Apr 14, 2014

I have a macro that runs when a spreadsheet is opened however i sometimes need it not to run. Rather then furiously hit escape i was hoping to get a dialog box that would prompt yes/no to run the macro and if an option was not chosen after a few second then to run the macro anyway (so basically only by clicking "no" would you stop the macro from running).

I found this code here that gives me the yes/no message box and the 5 second time-out to get rid of the message box, however if the message times out it doesn't run the macro. what i need to tweak to make it do so if no input comes from the user? [URL]

View 2 Replies View Related

Open Specific Worksheet On Startup

Apr 17, 2014

What would be the macro to open a specific worksheet upon startup?

View 2 Replies View Related

Macro To Cancel Startup Messages

Jun 29, 2007

I have a Macro that opens numerous excel files.

What code do I require to cancel the startup message?

ie. The message that displays "Disable / Enable Macros" (security setting cannot be changed, so message is always displayed).

Plus I then have some startup message boxes which I manually click OK to continue, but how do I cancel this messages using VBA Code?

View 9 Replies View Related

Add Personal Macro Workbook Upon Startup

Oct 7, 2007

There are two macros that i'd liek to add to my personal macro workbook upon startup of excel.

i tried to do them without coding but it appears that some actual coding is necessary.

1) i'd like to be able to select any # of cells anywhere on the page and hit ctrl+shift + n and have all of those selected cells read #N/A (the forumula is =na() )

2) i'd like to be able to select any number of columns (i do finance/econ research so all data is in chronological order from 1960-present along the columns. i.e. each variable is a column vector.) and be able to hit ctrl+shift+b and have VBA make a chart in a new sheet with my default settings

i've tried to do these but recording the macro hard codes the select cells for 1) and always runs into weird problems for 2).

View 9 Replies View Related

Application.visible = False On Startup

Dec 30, 2003

Sub Workbook_Open()

Application.visible = false

call Program

End Sub

It seems to work, except that the workbook is visible for about 1 second. I have a user form that opens for username/password verification.
Is there any way to prevent the workbook from becoming visible at all until I want it to?

View 9 Replies View Related

Autorun Macro On Windows Startup

Mar 12, 2007

how can i set a macro to start on whenever the computer is started first on any day.

View 2 Replies View Related

Excel 2003 :: Slow Startup On Windows XP SP3

May 4, 2009

I'm currently running MS Excel 2003 on Windows XP SP 3. When I launch Excel from the start menu, it starts right up. When double-clicking an Excel file, it takes approximately 45 seconds to a minute to launch and open the file. This happens no matter what the file size.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved