I am getting frustrated with the Text to Columns Wizard. After using it once on a spreadsheet, it continues to opperate whenever I paste.
Is there a way to stop it from automatically converting text to columns when I paste?
I am trying to write a Macro that will alow me to choose a text file to important but bypass the Import Text Wizard when doing so. I used the record macro function to get this
View 4 Replies View RelatedI am pasting query results from WinSQL into Excel and use 'Paste' and then, from the little Paste Options icon, 'Use Text Import Wizard'. I choose tab delimited and then reset the decimal separater using the 'Advanced' button on step 3. Since I do this daily I would like to create a macro to do it all for me, namely paste what I have already copied to the clipboard using the appropriate settings. Recording doesn't reflect the steps I executed. How can I call the text import wizard from vba with the clipboard contents as input as opposed to a text file?
View 5 Replies View RelatedI am importing a text file that has a lot more than 256 columns. The data will be updated weekly with a different text file. I know how to get past the 256 column limit when importing a text file like this. This link explains the method I am using to import the text file. [url] Since I am importing onto several sheets I get the dialogue box asking me to choose a file to import from for every sheet when I use RefreshAll. The same file that is used by the first sheet will be used by the rest of the sheets. Each sheet just imports a different section of columns from the text file. I want to avoid choosing the same file 30 plus times (once for each sheet) when I click refresh all. Is there a code that would allow me to choose the file for the first sheet, and the other sheets would follow suite?
View 9 Replies View RelatedI am trying to stop this code from re-occurring at the end of the spreadsheet. There are two constants that will always appear as text, one is "blank" and the other is "Grand Total". I would prefer to use "Blank" if possible. The spread sheet varies in size from day to day. I have a range right now in use up to A700. I did this because when I originally put in a column formula, it ran until 20000 + rows down. Can someone please provide me with a formula that stops this code once it reaches the bottom of my spread sheet?
View 2 Replies View RelatedI'm using the conditional sum wizard to gather the cost of some projects based on two other conditions:
Column 1 is Country
Column 2 is Cost
Column 3 is Category
I have sucessfully used it with several countries but after sucessfully returning the correct resultsa for 5 countries it says "The formula you are building is too long. Please specify fewer conditions" - The amount of conditions is the same as the sum just before it which worked fine!!!
How do I setup a STARTUP WIZARD in EXCEL which allows user can input information, and these information will be stored in the excel worksheet automatically.
The startup wizard is defined as a window which will pop up automatically when you open the Excel document. The wizard contains forms.
I have the dupe wizard add on, on my excel program. I am wondering why when I click on the Dupe Wizard button a message in a dialog box pops up saying 400. The Dupe Wizard application will not do it's job now, only the dialog box saying 400 pops up.
View 3 Replies View RelatedI am trying to create a formula in the Conditional Formatting wizard.
I would like the formula to format B2:F2 in a particular way if a count of the number of values in this range equals 5 AND if all values are less than or equal to 25.
I have tried with following formula without success:
=IF(AND(COUNT(B2:F2)=5),COUNTIF(B2:F2,”<=25”)=5),””))
Is there a way to reset the defaults for the text import wizard? I occasionally import a number of files in CSV format, but the wizard defaults to tabs as the means of separating the text. I would like to reset the default on the second page of the wizard to commas, not tabs.
View 3 Replies View RelatedI am using this code to import txt documents, but once the file has been selected and everything, the excel data import wizard shows up... I now would like to get rid of this problem, as well add a standard path to this code, so that I dont always have to start from the desktop and click through tons of folders to get the folder containing my files.
View 12 Replies View RelatedI was reinstalling office on a laptop where the hard drive had been replaced. I used the 'save settings, wizard on my desktop and put in the new settings when I reinstalled Office.
This almost worked, but not quite.
Word and PowerPoint seem to be fine but when I reopened Excel I got a number of messages saying that objects could not be loaded because they were not on the machine. Some of this was because Excel was trying to reference add-ins that needed to be reinstalled. I have done that, and there are now fewer messages - but there are still two and I can't get rid of them. One looks for 'objects' the other a single 'object'. There seems no way of finding out what the objects are in question, and what it that Excel is stumbling over. Can I do anything other than abandoning my previous settings and starting again, or else living with having to click twice every time I start excel to get rid of the messages?
I have tried uninstalling Excel and reinstalling but this doesn't help. Perhaps registry changes are the problem...and I hate the registry.
I'm wondering if it's possible from a button placed on a userform to call the pivot wizard and then create a pivot table, which is then saved and imported into my form ??
View 8 Replies View Relatedim building a user registration form in excel
now i realy would like to have a search form within my wizard but
i cant get it done.
i have read some other articals relating to this but they dont do
multiple field search (like day of birth and telephone numbers etc)
the form i would like to have should do a search for exmp. by phone number but than also displays all other corresponding user info in the results
the xls file included has some advanced features like automated building of commandbar menu's and has mailing features (currently quoted out) + build in timer events + on close auto save + allot.
I have created several userforms within my excel spreadsheet and i want to be able to click a command button on one form which will then hide the current form and show the next form. In previous spreadsheets i have used the following:
Private Sub CommandButton1_Click()
Form1.Hide
Form2.Show
End Sub
However, i am having trouble with this spreadsheet as when i am typing my code after the Form1. the hide command (and show) does not appear in the little pop scroll bar that predicts what command you plan to use. (If i type it regardless then it doesnt execute)
What is even stranger is that if i write a sub routine in a module such as:
Sub Test_Form()
Form1.Hide
Form2.Show
End Sub
And then call it:
Private Sub CommandButton1_Click()
Call Test_Form
End Sub
i'm trying to build an app that'll take a user through 5 or 6 steps of a process, with maybe 2-3 substeps in some steps. right now i'm currently using a multipage Userform , but all the tabs make the whole thing look cluttered (even when there's a "Next" button in plain sight). this is especially because i've put each substep as a multipage form under that step's page (multipage forms inside a multipage form). so steps 1-5 would each have their own pages (1-5), then in page 1 you'd have another multipage form (1.a. - 1.c.). is there a way to make it look simpler? i'd like it to look a bit like a Wizard (ie remove all the tabs), but the only way i can think of is to throw a whole heap of controls on one page, and turn them visible/invisible each step of the way.
View 4 Replies View RelatedI have a table of data as below recording daily foreign exchange rates.
Column A = Time and date
Column B = USA
Column C = UK
Column D = Aust.
Column E = Japan
Column F = Euro
Time and date USA UKAust.JapanEuro
04-Jan-20060.68390.39180.924379.470.5693
05-Jan-20060.68660.39050.918779.720.5666
06-Jan-20060.68710.39150.919579.720.5675
Then in column H i have a formula that works out if the rate has exceeded a specified base rate, if it has i display Threshold Exceeded and if it hasn’t i display No Action Required.
OK from here i want to count the number of times in the month the Threshold has been exceeded. I can do this by using the countif formula.
Now this is the section i need help on
For a specified time, say a month, i want to count the maximum number of times the Threshold has been exceeded consecutively.
E.g
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
No Action Required
No Action Required
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
Result = 5 (max number of consecutive Threshold Exceeded” for a specified time frame)
I am trying to create a line graph and I have 17 rows of data for 17 different employees. There are 18 rows when including the header row.
My data is as follows
Column A - Employee Name
Column B - Month 1 data
Column C - Month 2 data
Column D - Month 3 data
Column E - Month 4 data
Column F - Month 5 data
When I highlight the data and go to the chart wizard, I select "Series in Rows".
However, on the series tab it only brings in the data for 6 employees.
Is there a way to automatically bring in all the data without having to do it manually, or is this a limitation of Excel?
how to quit this Do and For loop:
This simple coding should repeat this four times:
first ask user to input data in Textbox2.Text and then Textbox3.Text until user presses Cancel. --> x 4
But it don't seem to exit the Do Loop
For j = 1 To 4
i = 1
Data1 = TextBox2.Text
Cells(i, j).Value = Data1
Do
n2 = TextBox3.Text
If Cells(i, j).Value <> "" Then
Do
i = i + 1
Loop Until Cells(i, j).Value = ""
End If
In my main macro I have a line that makes it jump into a timer subroutine that starts the main macro every 30 seconds. However, I also have a line in the main macro that makes it jump into another subroutine at 2pm everyday that sends out emails. The problem is that if the timer starts the main macro again before the sending emails subroutine finishes, then it will only finish sending a portion of the emails before it jumps back into the main macro. Is there any way to stop my main macro once it recognizes that it needs to jump into the email sending subroutine, or a way to at least stop the timer subroutine?
the part of my code the jump into the sending emails subroutine and the timer subroutine look like this so far:
If timevalue(now()) >= timevalue("14:00:00") And timevalue(now()) < timevalue("14:00:31") _
Then DAILY_REPORT
End If
StartTimer
I have a macro which imports data from a mainframe dump text file and performs 'Text to Columns' on the imported data so that formula in the spreadsheet can act on the data. The code works perfectly well when I use it, but if a different user logs on and performs exactly the same mainframe dump and import macro the Text to Columns action splits the raw data in a different way and the result is that the split renders the formulae useless.
I've experimented a little and for some reason it appears that the 'Field Info' parameters which are produced when the Text to Columns function is recorded in a macro differ between users even though the raw data is exactly the same.
FieldInfo:= _
Array(Array(0, 1), Array(18, 1), Array(35, 1), Array(56, 1), Array(70, 1), Array(88, 1), _
Array(102, 1))
A good number of years ago I used a line of code at the beginning and the end of a macro to keep the spreadsheet from moving until the macro was finished. At the close it moved if a movement was necessary.
View 6 Replies View Relatedhow do i stop a sheet from being printed and add an error message/ dialogue box saying this sheet cannot be printed, view only etc etc. this to appear when they goto the print option in the menus.
View 5 Replies View RelatedI have a for which consists of
2textbox
1 listbox
1 textbox.
While entering the data, the cursor does not stop in the list box and goes directly goes to the next textbox. Autotab is set to true.
I am using a code to transfer data from one sheet to another using the VBA below. The only problem I am having is it is copying the conditional formatting as well which I don't want it to do as it is already set up in the sheet it is copying to. How can I stop this?
Code:
Sub MONTHLY_UPDATE_TextBox2_Click()Dim rRehab As Long, i As Long
Dim wsRehab As Worksheet
Set wsRehab = Worksheets("AUG")
[Code]....
I have event procedures for the following form events: Before update, After Update, On Open, On Load and On Activate and I have added a breakpoint to every event.
However, despite breakpoints in all these pieces of code the form opens and closes without the code stopping to allow me to debug by manually stepping through the code.
Have I done something fundamentally wrong, I'm still a newbie at VBA?
I have written the macro;
Sub
For i = 2 To FinalRow
If Cells(i, 1).Value = Range("A1") Then
Cells(i, 1).Select
End If
Next i
End Sub
And I was wondering if there was a way to end the Sub as soon as it gets to the Cell with the “A1” value in it as opposed to just continuing through all the rows to the end of the sheet even after the right value has been found?
I am running a timer in XL using the Application .OnTime Method.
Everywhere I've looked tells me that the procedure to stop the timer is
Sub StopTimer()
On Error Resume Next
Application.OnTime earliesttime:=RunWhen, procedure:=cRunWhat, schedule:=False
End Sub
I have this code in with the timer, but when I hit F5 or go to Tools--->Macros--> and Run the StopTimer Macro the timer just keeps running.
how I can properly call this procedure and stop the timer?
I have the following VBA in the attatched spreadsheet (seperated so I could upload)
The only problem that I have is that I cannot stop the loop, it constantly keeps going round in a circle.
What im wanting to do is when the Date checked is the End date and the End Time has been checked, to move onto the next row and do it again until it gets to row 40.
Sub Calculate()
Dim CellNo As Integer
Dim CurrentDate As Date
Dim StartDate As Date
Dim EndDate As Date
Dim theDate As String
Dim c As Range
Dim i As Integer
Dim addDate As Integer
Dim DaysHoursSick As Date
Dim StartWorkTime As Date
Dim EndWorkTime As Date
Dim endmarker As String
I've only got this VBA working really under Wednesday so I can make sure it is right before adding it onto the other dates,
I'm using Application OnTime to fire a procedure every 30 mins. It works great, but the workbook tries to reopen itself when i close it (but not if i close excel entirely). I assume this is because I haven't stopped it anywhere. So I put a call to a procedure that has: Application.OnTime RunWhen, cRunWhat, , False
In the "Workbook_BeforeClose" event. This doesn't solve the problem. What am I missing?
Private Sub Workbook_BeforeClose(Cancel As Boolean)
StopTimer
End Sub
Private Sub Workbook_Open()
StartTimer
End Sub
(module1)
Public RunWhen As Double
Public Const cRunIntervalSeconds = 1800 ' thirty mins
Public Const cRunWhat = "dothis"...............................