i'm trying to build an app that'll take a user through 5 or 6 steps of a process, with maybe 2-3 substeps in some steps. right now i'm currently using a multipage Userform , but all the tabs make the whole thing look cluttered (even when there's a "Next" button in plain sight). this is especially because i've put each substep as a multipage form under that step's page (multipage forms inside a multipage form). so steps 1-5 would each have their own pages (1-5), then in page 1 you'd have another multipage form (1.a. - 1.c.). is there a way to make it look simpler? i'd like it to look a bit like a Wizard (ie remove all the tabs), but the only way i can think of is to throw a whole heap of controls on one page, and turn them visible/invisible each step of the way.
Could I use 1 multipage UserForm Instead of 8 UserFoms. Is it better to use 1 multipage UserForm with 8 pages or 8 UserForms. I dont know if this make sense or not?
I have a MultiPage userform and I'm adding (4) control buttons - CancelButton, BackButton, ForwardButton and FinishButton. On the first page, those names are fine but when I get to subsequent pages, I get an ambiguous error if I try to name the controls the same. But the code will all be the same. What am I missing? In an example that I have, the user was able to name all the controls with the same name. What setting would control that?
I've got a userform with multiple pages, and in my userform initialize sub I set the focus to "combobox1" on "page1". When a user is on page2 of the form and clicks my "ClearData" button, which calls the initialize event, I get a run time error 2110 - "Can't move focus... etc" I would like users to have the ability to clear the form and start over no matter what page they are on.
I have a userform that has a multi page on it with 4 pages. I notice that there is no way to have the individual pages be set to a click event- or none that I see anyways. What I am wanting is for a series of events to happen based on what page the user chooses from the four (like a userform initialize type event).
What are the differences/advantages to these 2 controls in a User Form?
I have already seen that the tab strip doesn't seem to toggle b/t pages, as a frame I placed remained on both "tabs" (I am wondering what it does if you can't toggle).
Have very recently been upgraded to Windows 7 with Excel 2010 at work. On printing out a 10 page doucment, (all of which are landscape format), when vewing print preview, the first page is previewed as landsacpe, but subsequent pages are portrait.
If you change format of 2nd page to landscape all subsequent pages switch to landscape.
Have looked at a similar format document created last month and it behaves exactly the same. Whole document landscape but on print preview only first page is...
Whats the VBA code for transfering selections on a multi select list box to a page. ex. the list box has selections from 1 to 20 and I want to select 3,4, and 5 then on the page I want it to say 3,4,5
I want to have the top half of the userform colored in Red and the bottom half in green. This is not something of much practical use but would be cool and certainly very educational to see if could be done.
I have been searching to see if i could find some snippet Win GDI API codes which i could adapt to Excel and am also asking here maybe someone has seen this done in excel userforms before.
I would like to add a combobox type control that will allow multiple selections. I know that the combobox in the MS Forms Object Library only allows single selections and that the list box is the way to go to allow multiple selections, but I am trying to keep the form as small as possible. I would like to add a control similar to the one used on pivot charts, where the user clicks the dropdown box and can select multiple items. I'm hoping this control is installed with MS Office and just needs a reference to it, but I am open to installing third party controls as well.
With the use of the option buttons,the page needs to made visible or invisible.
Example: on Page one, i have placed radio buttons as page2,Page3&page4.
By default only page 1 should be visible and when we select radio button page2, page2 should become visible or else it should be invisible,when we select radio button page3, page3 should become visible or else should remain invisible.
I have a UserForm which has a multipage with 2 pages, each page has many controls and associated code. I now need to add a third page but cannot get the code supplied to work.
VB: Sub AddNewPage() Dim NewPage As Page Set NewPage = frmColEd.mpCust.Pages.Add(, , 2) NewPage.Caption = ThisWorkbook.Sheets(2).Text frmColEd.Show End Sub
frmColEd is the name of the user form and mpCust the name of the multipage on that user form. I keep getting a 'Type Mismatch' on the SetNewPage=.... line no matter how I change it.
The issue I am having is that the code fails if there is ever a "sheet2" left open. I need it to always target the sheet Data5m.
What seems to happen is the sheet targets the first available sheet. This book only consists of 1 sheet, but generates other sheets later, sometimes extra sheets are left open.
Microsoft Excel Objects - This Workbook code
'The following is for the Userform DataReport code
Private Sub ComboBox1_Change() 'was A, now N DataReport.ComboBox2.Clear If Data5m.FilterMode = True Then: Data5m.ShowAllData Data5m.Range("A1").AutoFilter field:=14, Criteria1:="=" & DataReport.ComboBox1.Value Call FillCombobox(Data5m.Range("X2", Data5m.Cells(Rows.Count, "X").End(xlUp)).SpecialCells(xlCellTypeVisible), DataReport.ComboBox2)
When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
I have a MultiPage User Form, it has 2 tabs within the User Form.
I want to display Tab #1 (the first tab) as the 'visible/active' Tab for the user upon opening the user form. How do I do that?
Usually, I would open a User Form with frmMyForm.Show in a private module, to show the form. But now I have 2 Tabs, and want to select a certain Tab upon opening it?
I have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:
[Code] .....
But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.
I'm using the conditional sum wizard to gather the cost of some projects based on two other conditions: Column 1 is Country Column 2 is Cost Column 3 is Category
I have sucessfully used it with several countries but after sucessfully returning the correct resultsa for 5 countries it says "The formula you are building is too long. Please specify fewer conditions" - The amount of conditions is the same as the sum just before it which worked fine!!!
How do I setup a STARTUP WIZARD in EXCEL which allows user can input information, and these information will be stored in the excel worksheet automatically.
The startup wizard is defined as a window which will pop up automatically when you open the Excel document. The wizard contains forms.
I have the dupe wizard add on, on my excel program. I am wondering why when I click on the Dupe Wizard button a message in a dialog box pops up saying 400. The Dupe Wizard application will not do it's job now, only the dialog box saying 400 pops up.
I am trying to create a formula in the Conditional Formatting wizard.
I would like the formula to format B2:F2 in a particular way if a count of the number of values in this range equals 5 AND if all values are less than or equal to 25.
I have tried with following formula without success:
Is there a way to reset the defaults for the text import wizard? I occasionally import a number of files in CSV format, but the wizard defaults to tabs as the means of separating the text. I would like to reset the default on the second page of the wizard to commas, not tabs.
I am trying to write a Macro that will alow me to choose a text file to important but bypass the Import Text Wizard when doing so. I used the record macro function to get this
I am using this code to import txt documents, but once the file has been selected and everything, the excel data import wizard shows up... I now would like to get rid of this problem, as well add a standard path to this code, so that I dont always have to start from the desktop and click through tons of folders to get the folder containing my files.
I was reinstalling office on a laptop where the hard drive had been replaced. I used the 'save settings, wizard on my desktop and put in the new settings when I reinstalled Office.
This almost worked, but not quite.
Word and PowerPoint seem to be fine but when I reopened Excel I got a number of messages saying that objects could not be loaded because they were not on the machine. Some of this was because Excel was trying to reference add-ins that needed to be reinstalled. I have done that, and there are now fewer messages - but there are still two and I can't get rid of them. One looks for 'objects' the other a single 'object'. There seems no way of finding out what the objects are in question, and what it that Excel is stumbling over. Can I do anything other than abandoning my previous settings and starting again, or else living with having to click twice every time I start excel to get rid of the messages?
I have tried uninstalling Excel and reinstalling but this doesn't help. Perhaps registry changes are the problem...and I hate the registry.
