I have a subroutine to delete non-header rows. This sub routine seems to choke on the delete line.
Code:
Sub CleanSheets(Header As Integer, WorkSheetToClean As Worksheet)
Dim WorkSheetRows As Integer
WorkSheetRows = WorkSheetToClean.Cells.Find(What:="*", SearchOrder:=xlRows, SearchDirection:=xlPrevious, LookIn:=xlFormulas).Row
WorkSheetToClean.Rows(Header, WorkSheetRows).EntireRow.Delete
End Sub
I'm trying to use VBA code to delete certain rows based on a couple of criteria as follows:
1) If column header is "TERMINAL NAME" and the cell value in that column is "BONDDESK", I need the entire row deleted.
2) Similiarly, if the column header is "PRODUCT TYPE" and the cell value in that column is "CORP", that entire row needs deleted as well.
The information is coming from another source, so the columns may change from day to day, i.e, "TERMINAL NAME" may be in Column L one day but in Column O another day.....
I have a short subroutine to delete a row in a second worksheet (SUMMARY EXPENSES) if one is deleted in the main worksheet (AS CODES) as per below:
[Code] .......
In theory the row deletion should only be triggered IF dynamiccounter is smaller than staticcounter, but the fact is anything whatsoever triggers the row deletion. If I type text into a cell a row gets deleted. If I copy a cell, a row gets deleted. It works great at deleting the line, but I suspect it has nothing to do with the counters I set up and the reassigning of the counter value towards the end of the If statement.
So I want to add some VBA Code that deletes specified columns and then insert Bolded Column headers to the remaining columns. The columns I want deleted are D,F,I,J,K. For simplicity purposes, the column headers would be A,B,C,D,E,F,G.
I tried using Columns("D,F,I,J,K").delete but I kept on getting 13 error.
[Code] ......
Attached File : Test VBA File.xlsx
I imported data into Excel. The first row is a header row in A1 it is fine until the next header row in A12, A23, A34 all the way down to many rows. The problem is the header rows are overlap with other data by seperating with couple of spaces. I need a VBA to move a whole header characters to it own row just right after couple spaces. See the attached for more detail.....
View 2 Replies View RelatedI have a worksheet with 30 sets of 3 columns, each column has 20 to 30 rows in use for the same realitive data. I want to get the sum for each 1x across 30 sets of the columns. I am checking vs if it says Projected or Actual. My Visual Basic macro ability is very limited at best. I have a totals row for each row of data so i can see totals for 1x over 30 days, 1.5x over 30 weeks, and 2x over 30 weeks.
Here is the basic idea of what i am dealing with:
A B C
Projected (merged across A, B, and C)
1x 1.5x 2x
8 4 1.5
7 0 0
8 2 0
8 4 5
Again, this represents one day, and I am trying to track at least 30 days across 90 columns. Also there are anywhere from 20 to 30 people being tracked at any one time so this continues to many more rows depending on the job.
Please help, it would be greatly appreciated.
I am trying to understand how to simply COPY the Header Rows from one sheet to another sheet.
The first four rows have the report heading with the fourth having the column titles.
i am trying to come up with some code to print many sheets in a workbook based on user clicking a button on each sheet.
I would like the code to be reusable and based on the activesheet, this way I don't need to write code specific for each sheet.
My first thought was to use something like ActiveSheet.UsedRange, but the rows may span several pages, so I'll need the header row to repeat on each page
Here's a snippet I recorded
ActiveSheet.PageSetup.PrintArea = "$A$2:$E$12"
With ActiveSheet.PageSetup
.PrintTitleRows = "$2:$2"
But I can think of a way to use UsedRange but drop out about rows 1-4 which do not need to be printed on the reports
Number of Cols varys on every sheet as well and diff start/stop cols
Ex one sheet A:G, another sheet C:T
I have two header rows on a sheet that I need to sort starting on Row 3, Column A.
The sheet is A-K and rows 1 and 2 are headers
Row 1 has merged cells of A-F which says "Information" and then G-K " Tracking Section"
Row 2 is broken up into individual sub-headers in columns, A-K each one having a bit more info for instance:
Under the "Information" merged header in row 1 there is
A2 Name
B2 Work Center
C2 C/O date
D2 Due CC
E2 Due MX
F2 Date Received
and G-K in row 2 has different sub-headings.
I have tried to use my normal code, which is great for one header, but it ends up sorting the sub-header as I call it...
I want to filter my dataset, select column B & C to copy, but exclude the header row. I am having a hard time offsetting the selected range. I get a compile error on what I try.Here is my code (yes, I know, its a little juvenile and I will clean it up, but I need to see things clearer at first):
Sub GetBarrelQualifiers()
'
' GetBarrelQualifiers
[code]....
My excel contains first 5 rows of heading information and the rest of the rows contain the data. I want to select a specific row from the data and run a macro that would delete all other data containing rows.
This is what I have now:
Code:
Sub DelRows()
Rows(6 & ":" & ActiveCell.Row - 1).Delete
Rows(7 & ":" & 65000).Delete
End Sub
Everything is fine if I select any data row except the first one (R6). In that case, the macro doesn't work as it should, deleting a row from the heading ones.
Is there a way to link a header or a portion of a header to a specific cell?
View 14 Replies View RelatedI have data in excel sheet in the below format:
Existing view.png
How to write a VBA code or Macro to get it in below format:
Required View.png
Timestamp column is the unique key.
i have a range of cells which is nxn where n>1. i want to place a header 2 rows above this range which is aligned on the left. this is what i tried:
View 3 Replies View RelatedI have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
1. Remove J,K,N,A Columns,
2. In the last O (TIMESTAMP) column, the date is 14-Jul-09 format change it to 07/14/2009 (this format mm/dd/yyy
3.Filter L column (VAL_INLAKH) Remove all rows from whole sheet which has 0 value
4. Column C (EXPIRY_DT) date format is 24-Sep-09 , "dd-Sep-09" change to "Sep" only
5.Merge Column B,C,D,E (SYMBOL.EXPIRY_DT.STRIKE_PR.OPTION_TYP
respectively )
I have a spreadsheet with several columns (all column names are in row 1).
I have 2 of column names. Note that their actual column# might change so the macro would have to look for the column name and NOT the column position ...
How can I program a macro to delete columns based on what column header contains? For example, I want to delete entire columns (including header) if the corresponding cell in the header row contains the % symbol.
View 6 Replies View RelatedI've been trying find an appropriate formula to extract the column header from a table in a different sheet if the row header and value in that table is known.
in the lookup table the row titles (column A) are product codes, column titles (row 2, D through AX) are business names and the table values are quantity.
In a different table I have product codes in column A and in column B i have the max number/quantity of products for that code. In column C i want to put the company name associated with the product and the number/quantity.
VBA jumps out of my called subroutine which is stored in a Module halfway.
When I call the SortLec() sub, it runs until y1 = Application.Match(MC & "-" & CI, rng, 0), and then it just jumps back to the SUB commandbutton1_click() IF statement. Why is it that VBA skips the rest of the code from my sub?
Option Explicit
Private Sub CommandButton1_Click()
Dim i As Integer
Dim numofrows As Integer
Dim workbook_directory As String
Dim file_name1 As String
[Code] ............
Im trying to call another subroutine within the same workbook but it doesnt work,
---------------------
Sub Macro1()
Dim mac1 As Variant
Dim mysub As Variant
Select Case Cells(1, 3)
Case mac1
Call mysub
End Select
End Sub
---------------------
in writing a subroutine that needs to ask the user
1) tax file number
2) Income
3) tax withheld
It then needs to use a function that i already made called 'incometax' that calculates 'taxpayable' and use that to calculate taxreturn (difference between 'taxpayable' and 'taxwithheld').
I then need it to output like this in a message box
Estimate for tax file number: .....
Created on ......
Total income: ......
Tax witheld: .......
Tax payable: ......Tax return: .......
Is calling a subroutine within another different than running it from the play button in the VB editor? I am getting different results.
I have the following code that I want to call from another subroutine that creates a series of command buttons.
Sub DynamicButtons()
Dim ButtonCount As Integer
Dim ctl As OLEObject
' Create the Button objects
ButtonCount = 0
For Each ctl In Sheets("Sheet1").OLEObjects .............
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies View Relatedremoving duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
In my excel I'm copying rows upon specific criteria to another tab.
The question is how I can delete copied rows and update the original tab without empty rows? (N of rows is always changing)
Is it possible to refer to an object which is in another subroutine?
Or should i have to give its definition in each sub i need it?
I need to allocate an existing subroutine (its code below) to a new button I'd like to add to my sheet. Two questions arise: to use "form control" or "activeX"?, also should I redfine the first line of the code?
[Code] .........
I want to pass the name of the routine as a parameter.
View 6 Replies View RelatedMy code passes a string created by a function to procedure. It all works great, but i need to add something so that if the string = false then sub doesn't run. What's the best way to do that. Here is some of the
View 6 Replies View Related
