I have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
Copy rows from one Sheet to another based on a separate cell value But specifically, I am trying to copy row values from Columns C through column Z in Worksheet 1 of file POHeader.xlsx to row values Columns N through AK in file POReceiv.xlsx when the (Purchase Order #) values in Column A of each file match.
The reason is behind this is - one file has the unique Purchase Order number as the key without associated parts and the other file has the associated part number as the key with purchase order number attached.
I don't know whether I need to use VBA or if I can just use an index and match function.
I have about 10 rows of data that have columns of information describing computer hardware and pricing. There are 10 rows, because each row represents a different country and different tax rates and pricing changes per country. So each column of a row has a specific formula to calculate information for that row's country information. All these 10 rows of formulas are kept as a reference at the bottom of the sheet.
At the top of the sheet I need to have a drop down menu to choose a country and then it will automatically copy and paste the row of that country to the current row at the top.
Is there any easy copy/paste macro for such a thing?
I'd like a formula that'll return the column header by matching a lookup value with a table in the second sheet.
eg: sheet 1
Name
Cell
Region
John
111-2222
[Code] .......
The formula should match the name in A2, John, with value from the table in sheet 2 and return the correct region, this case North.
I've searched for a solution on the board and the internet too but to no avail; I am trying to create a macro that will select the entire column based on a cell reference G1 which is infact a Date.
Column G to Column S are pre-defined with a specific Date in row 8. If the Date in one of these columns (G8 to S8) match with the Date in cell G1, say it finds a match with H8, then I want to copy the range F14:F2000 and paste as values in range H14:H2000. The possibility of a match found is limited to a single columns from G to S.
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
View 5 Replies View RelatedI have data in excel sheet in the below format:
Existing view.png
How to write a VBA code or Macro to get it in below format:
Required View.png
Timestamp column is the unique key.
I'm trying to use VBA code to delete certain rows based on a couple of criteria as follows:
1) If column header is "TERMINAL NAME" and the cell value in that column is "BONDDESK", I need the entire row deleted.
2) Similiarly, if the column header is "PRODUCT TYPE" and the cell value in that column is "CORP", that entire row needs deleted as well.
The information is coming from another source, so the columns may change from day to day, i.e, "TERMINAL NAME" may be in Column L one day but in Column O another day.....
I have a code which is copy/pasting the selection specified number of times
VB:
Sub CopyNtimes()
Dim i
For i = 1 To Application.InputBox("How many times do you want to copy the selection?", "", 1, Type:=1)
With Selection
.Copy .Offset(i * .Rows.Count)
End With
Next
End Sub
How to modify this code so that it can paste the selection specified number of times leaving specified number or rows
For Example:
Selection is A1:Z10
need to copy paste 2 times...
Rows to leave: 3
So it should paste in the range A14:Z24 and then A28:Z38
I have workbook "Sheet1" that has many rows and columns with values. Could I have code to find the cells value "plant2300" in column A and copy all the rows in column A that has the cell value "2300" into workbook Sheet2 (also copy with headers from Sheet1 to Sheet2 row 1).
View 3 Replies View RelatedI had a quick look around and couldn't find exactly what I was after my apologies if it already exists. I have attached a sample worksheet and I would like it the entire row A from sheet 1 to sheet 3 if the cells A2 OR D2 contain what is in cell Sheet2!A1.
View 3 Replies View RelatedOn my main worksheet, I have a list of stocks in the "A column", so for example reading down the list would be:
Vodafone
Vodafone
Ericsson
Nokia etc...
I have a seperate worksheet for each different name (about 100), and I wanted to know if there was a way to select all the information relating to the name "vodafone" for example, and to copy and paste that into the worksheet called vodafone. The problem is copying and pasting 100 times would take ages and wanted to know whether there is an easier way using VBA.
I am trying to match headers of different files and copy data.If the one of the header is not matched then a new column with the non matching header should be created and the column has to be copied
Ex: file1.xlsx has AA BB CC as header
file2.xlsx has AA BB DD EE as header
file3.xlsx should contain AA BB CC DD EE i.e data from file1.xlsx and file2.xlsx
I have more than 300 files how can I copy all the files to one excel file by matching headers ?
Basically I would like to copy rows where the name of the person (in Column A) matches a separate this.
E.g.
Name
DOB
Peter
30/9/1956
Jim
09/1/1923
Paul
01/2/1966
Lookup list:
Peter
Jim
In Sheet2:
Name
DOB
Peter
30/9/1956
Jim
09/1/1923
Note that there are many names (this is just an abstract) so I think it requires a macro.
I have dates in Column I (for the whole year) and i would like to paste them into specific cells in three different Columns A,B,C (ie A2, A5, A8, A11 etc) Same Numbers different letter for each respective column. I can get it to go from one cell to another but when i try to specify specific cells
This is what i have so far:
Sub Test()
Range("I1").Select
Selection.Copy
Range("A2").Select
ActiveSheet.Paste
End Sub
I enter a part number in "D1". The number of components required for that part number is returned in "G1" based on a VLookup. I would like a macro that will copy and paste the part number I enter in "D1" in the first empty cell in column "D" and will paste it once for each component (G1) required. For example, if the number of components required is 4, and the first empty cell in column "D" is "D10", I would like to paste the part number in cells "D10", "D11", "D12", and "D13".
View 2 Replies View RelatedI have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
i'm trying to create a macro to find any value <> "" from COLUMN B then copy Bx;Cx;Dx and paste into another worksheet with the name of COLUMN A.
And when the cells Cx or Dx is empty should appear 0 into the other worksheet
for example.
sheet1 ..... cell("dx") is empty
a b c d
w 5 3
the macro would copy 5,3,0 and paste into sheet named "w".
i found this code on internet but it's not quite good for me because it copies the hole row. i tried everything to change that but i couldn't.
[url]
(ORIGINAL CODE)
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
I need to copy and paste the specific dates from the specific city that the user will insert in the "dash" sheet.
Basically, I need the macro to read the city and range of dates that the user will type into the "dash" sheet and copy the columns "AA" to "AD" from rows specified by the dates input. Once it has been copied, it has to be special pasted just the value onto the sheet "1" beginning at location B2.
the the data will not be available as it is vlookups to another excel sheet that i have not provided. I have deleted the data, but you can pretty much put 1's everywhere.
Copy paste specific column with specific heading using macros. Roll No
Name
1
John
2
Abdul
3
Baig
1
I Want the Macro to find the column with heading "Name"
2
Copy the list from Name till the last Cell that is B1048576
3
Paste in Sheet2 Cell A1(Please see result in Sheet2)
Basically, I need to copy and paste upon certain condition (references) and paste related-datas in another sheet corresponding with these references. Every references are organized by lines with indicators on columns.
In attached file, see:
- worksheet ANALYSIS:
* datas in E2, G2, D18, D19, D20, D21, D22 that needs to be copy based on reference in C2,
* then need to find this reference in worksheet called GROUP SAVE,
* and based on this reference, paste above cells value in corresponding "Indicators" column number
THEN, I will have to do pretty much the same with subgroup data. But I can figure out for this second step that request same manipulation.
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I would like a code which looks on the worksheet “Racks” and if Column A is "Y" then copy the entire row and paste it on the to sheet “Summary Racks”. I would need it to then find the next instance and then continue to copy and paste. I have attached the file I am currently working on.
View 4 Replies View RelatedI want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub
I have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB:
Function DoOne(RowIndex As Integer) As Boolean
Dim Key
Dim Target
[Code].....
I'm trying to write a VBA script which will delete all rows in my Excel spreadsheet where Column I (which contains a status code) does not contain the word "Completed".
At the moment, I'm doing this the other way round: my script is able to search for entries in Column I which contain the status codes "Pending", "Awaiting Authorisation", "In Progress" etc and delete them. The idea is that when all those rows are deleted, I'll only be left with rows which have a status of "Completed". This works fine at the moment. However, the concern is that if a brand new status code is added to the data file, my script would be unable to pick it up and delete it. This is a small sample of the code I'm currently using (which deletes all the rows with statuses other than Completed):
I have these specific rows (2,3,4,6,43,44,45,63) which I would like to copy and paste it on a designated sheet. But my problem is, the column varies depending on the YEARS.
I do have codes for it, the one I got from the recording. I just do it for all of the rows (formula pasted here) until all of it copied on the summary sheet. However, when I finally finished it and I run it. I could see the movement form One Sheet to another and its not good.
A code that I could use for my better understanding of MACRO.
I have some specific procucts in coloum A in sheet (data), If that product was found in Sheets("allproducts"), copy all the rows and create a new sheet on the product name and save the excel.
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
On Error GoTo Err_Execute
'Start search in row 1
LSearchRow = 1
[Code] ....
Err_Execute:
MsgBox "An error occurred."
End Sub
I have some specific procucts in coloum A(a2, a3, a4, till a50) in sheet (data), If that product was found in Sheets("allproducts"), copy all the rows and create a new sheet on the product name and save the excel.
[Code] .....