How to get a formula that will substitute every X with the actual type of meat. For instance, under Monday column, my table should list Liver, Pork, Mutton and Lamb Stew instead of X.
Mon
Tues
Wed
Thurs
Friday
Liver
X
X
[Code] ........
I've got a small problem using VLOOKUP. If the function does not find a value, it returns #N/A. I would like it to say "Not Installed" instead.
The same goes for when VLOOKUP returns a zero - I would like it to return "Installed" instead. Since I've got a great number of rows, I would need an efficent way to change this.
I have a list of names on my first sheet, and I want to mirror these on a second sheet, but at the start of a repeating table containing data releating to each named person. eg. I want a Name in
'Sheet 1'!A4
to display in
'Sheet 2'!A5
, and then the name in
'Sheet 1'!A5
to display in
'Sheet 2'!A32
I have below set of value in Sheet 1 (it has category & Name), whenever I open the Sheet 2 & Sheet 3, unique values should get automatically posted in D column..
Category
Names
Pet Animal
Dog
Pet Animal
Cat
Wild Animal
Elephant
[code]....
I have two requirements on this..
1. Unique names should listed in cell D of Sheet 2
2. Unique value of both category & name should listed in Cell D of Sheet 3
I have seen in the forums where lists are created by refering to column values in other worksheets.If you create a list by entering text values can you make other lists dependant to those values and can those lists also be made up of text lists?
All the examples I have seen here use lists that exist in some other worksheet
I use lists which use text values directly and not from a worksheet. I'm wondering how to make a secondary/sub list dependant on each value selected so say if text value "A" is selected in list 1 then this only allows the list for "A" to be available for list 2 in its corresponding cell (the next one along)
I want extract table values from body of email into excel through vba code in outlook.
I want pull table values two kinds of mail format
One is First Part and another is Additional Ordering
I want pull table values for accurate First Part table into First order workbook where saved in path for accurate Additional Part O table into Additional Part workbook,where saved in path.
Find the attachment with code :
Attached Images
PARTS ORDERING.jpg
ADDITION ORDERING.jpg
Attached Files
First Part.xls
Additional Part.xls
I have attached an excel sheet which i wanted to write macro as an attachment. .
when I run a macro an email has to be sent to each persons listed in column A with Voucher # in the subject line and URL in the body of the message after the URL, the body of the message will remain same for all the emails:
so I have typed the body of the message in 2nd sheet:
to create a macro that counts a number of values for a couple of types. The list looks like this;
29 bananas
13 apples
18 bananas
14 pears
7 pears
etc.
So i want to create a loop the goes through the list and adds up all bananas, apples and pears. How do I do that in the best way?
I have been trying to use a FOR EACH C ...... NEXT loop, where each cell in the range is the beginning of a worksheet name that I need to import.
What I have got so far is:
Sub FindMyFiles()
Dim fs As FileSearch
Dim ImportWB As Workbook
Dim MasterWB As Workbook
Set fs = Application.FileSearch
Set MasterWB = ThisWorkbook
I have a table that lists the months of the year down from cell A2:A13, and days of the week along row from cell B1:H1. The data in between (cell B2:H13) is pulled through from elsewhere in the workbook and is in number format.
What I basically want to do is create another worksheet with the months of the years listed down column A, and in column B, for each month, I want the first day of the week where the value in the original table is more than zero, and in column C the second day of the week where the value is more than zero. I really hope that makes sense, was quite difficult to explain!
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies View RelatedI am trying to make up a workbook for a friend for their daily food intake. The formulas were working fine but she was hoping to be able to just enter the food and have the rest of the information automatically entered.
I was having no problem with it using a vlookup formula for the foods and a data validation drop down menu but when it comes to the final formula I am getting a #VALUE! error in that column unless there is a food listed.
I have attached to workbook. If you notice in the Sunday Tab I have the problem but Monday is fine since I have not added the vlookup formula. Is there a way to have it not show anything like in Monday when there is nothing entered?
i know by the formula =combin(49,6) how many combination of 6 numbers there are from a available 49 numbers (13983816).
how do i manage to get all combinations listed in a excel spreadsheet? I would want the numbers in individual cells. For example, Row 1 would show 6 numbers individually from A1 - F1.
I do realise that excel does not have enough rows to do this so may have to continue on other sheets.
I have a list of jobs names on one sheet and there are certain ones that i would like to put on a list on a second sheet.
what I would like to do is put a "1" in a cell next to the job names that I want on the other sheet and have them automatically listed.
I need a macro to find for example
Bigg, Kelly
Bigg, Kelly
Bigg, Kelly (find the last name listed in the column) then move over (0,2) and copy - paste into a different spreadsheet.
Where I am mainly stuck is it locating the last name listed in the file - if the name is listed multiple times.
I do have one issue I need to work on with a VLOOKUP formula.
I have a list of cities and counties that the VLOOKUP goes and looks at to pull information from.
The problem is that when there is a city and county with the same name (Example: Boulder and Boulder County) VLOOKUP always seems to jsut grab the one that is listed first in the list.
When you use the city name of Boulder, VLOOKUP always retruns the information for Boulder County.
Here is my forumula:
=VLOOKUP(qtProjAddress3,'City Mileage and Tax Rates'!A2:C518,2)
Is there something I can add to this formula that will allow it to return the proper city or county when the names are similar?
I have a spreadsheet which is used for tracking work items for a team of people. On one sheet I have a column of dates and rows of named 'tasks' against them. I need to identify the first and last dates at which a 'task' is listed.
My spreadsheet is attached.
On sheet2 K2 I want to see the first / earliest date where 'Fish' occurs on sheet1
On sheet2 L2 I want to see the last / latest date where 'Fish' occurs on sheet1
I have tried using SUMPRODUCT MAX / MIN but I got myself in a muddle!!
TrackerRH.xlsx
I am looking to create a formula to get the initials of a name, where the the last name is listed first, followed by a comma.
Now, the names could be full names or initials.
So, it could be something like: Smith, John R - result would be JRSSmith, John Robert - result would be JRSSmith, John Robert Michael - result would be JRMS There were similar formulas that I found here, but these only got the last letter of the last name - in this case the following formulas would have resulted (with the above examples) in: JTS or the last example with Michael, JLS.
=UPPER(MID(A1,FIND(" ",SUBSTITUTE(A1," ",REPT(" ",2)))+1,1)&RIGHT(A1)&LEFT(A1))
=UPPER(MID(A1,FIND(" ",A1)+1,1)&RIGHT(A1)&LEFT(A1))
Note: While I am using Excel 2010, there could be users that are still using 2003.
The current method I'm using to get the results I need in Excel are a bit manual and excessive. is a simple all in one formula for what I'm trying to do,
The data is 3 rows. We can also assume the data is in the first three columns starting from A1.
698
885
499
As you can see in the above set from 0 through 9, the numbers that are not listed are 0,1,2,3,7
And As you can see the numbers that are listed are 4,5,6,8,9.
How do I find and show which numbers from 0 - 9 are not in the set.
How do I show the number that are listed in the set Example:
Note: the special characters aren't needed.
698 4,5,6,8,9 --- 0,1,2,3,7
885
499
Note the the evaluation is for every three rows. So the three rows in the example are from a table with 150 rows. Each row begins a new evaluation for the next three.....Example:
698 and the following two starts the next set
885 and the following two starts the next set
499 and the following two starts the next set
and so on ......
I need a code that will copy a list in the same order from different sheets and will paste special and transpose it on the summary sheet.
View 1 Replies View RelatedI am creating a load file for software from Excel. Based on our planning calendar and delivery time, I need to calculate the Delivery day.
Excel File as follows:
Planned Delivery Time Planned Order Day Planned Delivery Day
8 days Thursday (Need a formula that says 8 days from Thursday would be Friday)
13 days Tuesday (Need a formula that says 13 days from Tuesday would be Monday)
I have attempted with simple formulas adding time, complex formulas, and cannot find a simple solution that works for days of the week.
I have a project I need to get done, and I've done most of it. But, there are a few things in VBA I'm unfamiliar with, and I was wondering if I could send you the file so you could take a look at it, and see if you're able to do it. This involves VBA. Honestly shouldn't be too too difficult, but something beyond what I can do. I have the specifications listed already, and I am ready to send it to you. Anyone feel comfortable taking a look at it?
View 9 Replies View RelatedI am attempting to create a macro that will loop through a range, each cell of which contains a worksheet name which needs to be activated in turn. My limited knowledge says that either of the two techniques below should work, but they do not.
Sub SelectSheet()
For i = 2 To 50
Sheets(Range(("J" & i))).Select
Next
End Sub
OR
Sub SelectSheetv2()
For i = 2 To 50
Sheets((Cells(i, 10))).Select
Next
End Sub
I have data coes that need to be converted, basically need to remove 1st and 12th digits, 12th digit only, or 11th digit. I have built spreadsheet with a mid sub formula to do all 3 separately, but cannot figure out how to combine the formula to do all three.
I am attaching the spreadsheet,
Following code doesn't work
Dim Value1 as String
Value1 = Substitute(Cells(4, "A"), "A", "", 1)
correct syntax to assign the result of substitute function in the Variable?
I have a formula who examines if they are the same. The last number at first quote is not a problem (the 45). The problem occurs only and allways when the horse's name have an apostrophe " ' ". In first example apostrophe is different from the usual. If i manually delay it and replace it - type keyboards apostrophe everything works fine. Obviusly its a symbol. I want a small macro for replacing all these symbols at, lets say column B ,where these names are located. How can i use substitute at this case?
I understand that Microsoft left Filesearch out of VBA for Office 2007 because it was buggy. Sadly, however, I still need it. It would help if they placed a comment in VBA help that stated that it was discontinued. As it is, they make it look as if Filesearch is still available for use. OK, I'll stop ranting now.
After reading several earlier posts, apparently I have to use the Dir function. I learn visually and cannot figure out how to use the function from the VBA help file since there are no examples. Does anyone have an example of code using the Dir function to insert filenames in an array? Once I see the code, I'm sure I can adapt it to suit my needs.
I have a whole bunch of dates in a column that look like this:
5/01/1998 when it is supposed to be 5/01/2098 is there a character you can use when you are using the find & replace mode i.e.
*/**/20** I know it is not the asterisk but I believe there is some other character that can be used and it won't change any other of the numbers except the 19. I tried reformating and it does'nt work because of the way they sent it to me.
Is there a way to use something like the SUBSTITUTE function when sending an e-mail using a macro?
Here's my ....
i have all the states listed in A1 and i would like to seperate them into east and west.
example if a1 have FL and want a52 to say East and if i put CA it would say West.
