I have a formula who examines if they are the same. The last number at first quote is not a problem (the 45). The problem occurs only and allways when the horse's name have an apostrophe " ' ". In first example apostrophe is different from the usual. If i manually delay it and replace it - type keyboards apostrophe everything works fine. Obviusly its a symbol. I want a small macro for replacing all these symbols at, lets say column B ,where these names are located. How can i use substitute at this case?
I have a vlookup function that requires the lookup values to be text, and I have a long list of numerical lookups.
My problem is that I need to go through all these numbers one cell at a time and change them to text. I've tried the easy way of highlighting the cells and formatting them to text but it doesn't work
All that works is adding an apostrophe at the beginning of the number which is VERY time consuming.
My question...
What is the apostrophe doing and why can't I do the same by highlighting and formatting as text.
An apostrophe has appeared at the beginning of the words and/or numbers in the cells. I have tried using the "Replace" feature to remove these apostrophes and it won't work. I need to remove the apostrophes so I can upload our inventory, as the SKU must be pulled exactly.
I can't remove the apostrophe mark from the cells. There are cells appearing to be blank but they all contain a single apostroph (like this ' ) if I click on them. Whenever I tried to replace them excel said cannot find a match...
I have to match up two columns of data from different sources.
In one column the apostrophe is being sorted as a space, in the other it is being ignored.
e.g Col A Misty M'Lady (ignored) Mohayer
Col B M'Lady (read as space) Misty Mohayer
Most advice I see concerns removing hidden leading apostrophes which is not the case here, others recommend Control and H to find and replace. This should work but does not as Excel does not seem to read the apostrophe at all.
I have tried Text to Columns > Delimited > Other ' to remove and then would have done =A1&B1 to put the text back together, but again this just does not read the apostrophe.
VB: Private Sub Workbook_Open()Worksheets("Sheet1").ActivateRange("$B$1").SelectSheets("Sheet1").ScrollArea = "A1:z25"End Sub
Now I want to disable the above such that I am able to add an Apostrophe ( ' ) in front of every line of this Macro. Is there a shortcut for this or do I need to Manually add apostrophe in front of every line? And then after disabling if I need to re-enable it is there a shortcut to that too?
I have a perfectly fine formula but whenever I try and use VBA to enter it for me it adds a leading apostrophe and it ruins the INDEX/MATCH with an RTE 1004.
I have a list of data that is 23K rows deep and need to match to eliminate duplicates. I know how to match but have been unable to format a key column to eliminate the leading apostrophe (e.g. 'KJM03390) from a mixed alpha-numeric field.
On exporting information from another database to excel the fields which are text in nature, these are always exported as with an apostrophe at the beginning of text into the excel cell. I can do nothing about this as the export to excel is a defined routine which i have no control over.
Unfortunately due to the amounts of data, I am handling 10,000 lines, the physical removal of this apostrophe at the beginning of the text in each cell is not a good way forward.
The apostrophe is to indicate it is a text string, I have tried edit find and replace looking for the apostrophe with no luck.
It is important for me to remove the apostrophe as it then allows the text which is in fact a hyperlink to be live
I receive a lot of spreadsheets which contain numerical data where each cell has been forced to be text by a leading apostrophe.
how to strip the apostrophe out so I can process the data, please? I know the apostrophe is a hidden character, so I can't use Find & Replace, and using MID or RIGHT doesn't seem to work, either, even if I Copy and Paste Special as Values.
Is there an alternative to manually editing every single cell?
I searched through some pages of old threads but could not find specifically one solution for performing the subject task on text strings in cells.
I have a lot of Excel files which contain both numerical data and text strings where each cell has been forced to have a leading apostrophe appended to the left side of the text strings and numbers.
How can I strip the leading apostrophe out?
I know the apostrophe is a hidden character, so I can't use Find & Replace.
I would like to figure out some VBA so that I could build this into and automate this via a macro I'm working on.
Is there a way to comprehensively do this for all cells containing text and numbers in a worksheet?
I'm trying to format an Excel 2010 spreadsheet so that I can import it into another application. I need to convert a number to text with four digits and a leading apostrophe - '0000 for example. How do I do this without having to type everything in manually?
There is a spreadsheet I use at work where we are told to use an apostrophe before the date to prevent the function bar from converting the dd/mm/yy to dd/mm/yyyy. Why does the apostrophe do this?
I imported the data from someone. And the cell in the column comes with the single quote'infront of the cell value. For example, the value that you see in the cell is "920-F-Y", but if Click on that cell, it turns out to be '920-F-Y, there's a single quote infront of it. I can't do a replace all on that single quote to empty space for some reason. Might just be my excel, or there's just something wrong. The problem is, I have 2 sources of data. I imported the first one, it has the single quote infront of it, i imported the second one, it has no single quote infront of it. I want to do a comparison, but I can't because it's different by single quote.
You can open my attachment, and try to replace that ' (single quote) with a space, and excel will complaint that it can't find it. I could go through each one and delete it individually, but consider that there are 5000 cells, it's just a lot of work.
I use the GetObjects function to gain access to the properties of a mailbox and want to fill out a table with some detail information. The code works fine until I have a mailbox which name has an apostrophe included.
Set o = getobjects("winMgmts:!\VS1 ootMicrosoftExchangeV2:Exchange_Mailbox.LegacyDN='/O=TEST/OU=TEST/cn=Recipients/cn=co'brien',MailboxGUID='{59A40254-9F12-4502-9A03-3FB5CB0BBD38}',ServerName='VS1',StorageGroupName='sg1',StoreName='mb1'")
I highlighted the section that causes the problem. The string within the string is encapsulated in apostrophes, hence the apostrophe in the mailbox name co'brien confuses the code and raises an error. Microsoft provides a solution by using escape characters, but that seems to work only in vbscript, not in vba. Here is a link to Microsoft's solution:
I tried some workarounds that are being used for a similiar problem with SQL statements as well, but again without success - these are the versions I tried:
I needed to change a formula to text before copying it to other cells. I did this with a Replace command: Replace> Find what: =IF( then Replace>Replace With: '=IF( Now I need to remove the apostrophe to turn the text in all the cells back to formulas. When I use the Replace>Find what: '=IF(and Replace>Replace with =IF(I get an error message saying that "Microsoft Office Excal cannot find a match".
I have a lot of Excel files which contain both numerical data and text strings where each cell has been forced to have a leading apostrophe appended to the left side of the text strings and numbers.
How can I strip the leading apostrophe out?
I know the apostrophe is a hidden character, so I can't use Find & Replace.
I would like to figure out some VBA so that I could build this into and automate this via a macro I'm working on.
Is there a way to comprehensively do this for all cells containing text and numbers in a worksheet?
I want to alert a user that he or she has typed in a text string that begins or ends with an apostrophe ' or begins or ends with a quotation mark " so that they can take corrective action in removing these characters. The reasons for this are superflous to this post but what I thought was a logical answer returns a formula error. Here's the scenario:-
A user enters a string of text in cell A1.
Cell B1 checks if the text, if any, in A1 begins or ends with a ' or a " and if it does, returns an "Error" message
The formula I've tried in B1 is =IF(OR(LEFT(A1,1)="'",LEFT(A1,1)=""",RIGHT(A1,1)="'",RIGHT(A1,1)=""")),"Error","Ok") but Excel will have none of it.
I have data coes that need to be converted, basically need to remove 1st and 12th digits, 12th digit only, or 11th digit. I have built spreadsheet with a mid sub formula to do all 3 separately, but cannot figure out how to combine the formula to do all three.
I understand that Microsoft left Filesearch out of VBA for Office 2007 because it was buggy. Sadly, however, I still need it. It would help if they placed a comment in VBA help that stated that it was discontinued. As it is, they make it look as if Filesearch is still available for use. OK, I'll stop ranting now.
After reading several earlier posts, apparently I have to use the Dir function. I learn visually and cannot figure out how to use the function from the VBA help file since there are no examples. Does anyone have an example of code using the Dir function to insert filenames in an array? Once I see the code, I'm sure I can adapt it to suit my needs.
I have a whole bunch of dates in a column that look like this:
5/01/1998 when it is supposed to be 5/01/2098 is there a character you can use when you are using the find & replace mode i.e.
*/**/20** I know it is not the asterisk but I believe there is some other character that can be used and it won't change any other of the numbers except the 19. I tried reformating and it does'nt work because of the way they sent it to me.
I would like to take a string such as R0-H6-D2 and return a number (1-4) based on one of four values for R, H and D in a separate column for each. The attachment should make what I am trying to do clearer.
I have a text field (description) and in the description i have a product code S followed by 7 digits and then in the process of pasting into excel i have lost the space after this code and before the next text. E.g. "Ballpoint pen S1234567With Free Delivery" should be "Ballpoint pen S1234567 With Free Delivery".
I dont know how to say =if("S" followed by 7 numbers,subsitute ..... etc)
I understand how to use IF and substitute. its the 7 numbers part i am stuck on.
I could do it in access with the wildcards but excel is different.
I can choose among three variables in cell A1. They are named P10, P50 and P90. I want to substitute them with 1,2 and 3 in cell B1. Is it possible to do this by using the substitute-function or do I have to use a nested IF.
