Sum Multiple Values By Serial Numbers In Corresponding Cells
Aug 4, 2014
I have a spreadsheet with a list of about 3800 lines of dollar values in "K" that correspond to various serial numbers in "E".
These serial numbers come up multiple times at different place throughout the 3800 lines.
I know by using SUMIF I can calculate the total value of each serial number, but is there a way to bring the serial numbers across to correspond to the sum of the dollar values?
my spreadsheet has duplicate serial numbers in column A and the corresponding row in column B has mutliple descriptions for the same serial number. I need to combine those descriptions into 1 cell rather than having multiple rows for the same serial number. is there an IF formula that I can combine with a concatenate that will capture what I need?
I have a dynamic list of items which I have to assign serial numbers to. If the serial numbers go in sequence, it would have been easy. But the problem is, they don't.
They go from A1 - A9, B1 - B10, C1 - C10 .... Is there a way I can assign an array to ensure that once the macro hits A9, it starts from B1, and once it hits B10, start from C1?
Sheet4 in my book looks like this: .............A.......................B................................C..................
I......Invoice No…..…Starting Serial No……...……Ending Serial No 2…………ND12………..6011000000013652……. ..6011000000103652 3…………ND13………..6011000000116526……....6011000000246977 4…………RF4……….….6006000001255724……..…6006000011249564 5.........RF4...........6005000000023652.........6005000000095624
note that the last 4 numbers of the series are randomly generated for security reasons and are not part of the range of the the serial No’s
So Invoice ND = 10 consecutive numbers, Invoice ND13 = 14 and Invoice RF4 = 1000 and RF4(again) = 8
The list on this sheet is a mile long
What I need is a “search box” with two windows in it
In one box I will type a serial number and in the second box I will get the Invoice number
The challenge is that the serial number could be between Starting and Ending serial No’s thus if I were to type serial number 6006000001086598 in the first box the answer in the second box will be : RF4
I have in my sheet from C13 to C350 many serial numbers which I manually type them in. These serials are 5 digit numbers, and I was just wondering if there's a function or formula that will not allow duplicate numbers in that column.
I am trying to get Excel to write a series of incremented serial numbers to an external program. I need 10 per line, then for the code to send ENTER and start writing on the next line. Following is my current code:
For i = 0 To qty - 1 SendKeys prefix_sn & next_sn + i & "," Next i
I have a userform for keeping records and would love to incorporate a new feature. I would want to generate a random serial number for each entry made with the userform.
I've modified this macro I found on this forum, all it does is compares 2 lists of 6 digit serial numbers and and then tells me which numbers are in list 1 that are not in list 2.
However, I want to modify it so that it also gives me the numbers in list 2 that are not in list 1 (put into column F). I then need it to cut the matching serial numbers (in columns A and B) from sheet 1 and paste them into sheet 2.
I want to make continuing serial numbers in excel in order to print labels to be able to track my deliveries. i know i can drag the fill cursor to automatically make it go the next number. however i also want my serial number should represent the month and the day the invoice was printed.
for example i want the serial number should be
column a (Jan 01) column b (Jan 02 ) column c (Jan 03) a1-01-01 a1-02-01 a1-03-01 a1-01-02 a1-02-02 a1-03-02 a1-01-03 a1-02-03 a1-03-02
The first number represents the month (example -a1 for Jan) The second number represents the day and The third number represents the invoice
How can i make that when i pul the cursor down it should continue with the invoice number
However when i continue right it should move the day number?
i have a list of serial numbers in a column, say column a, for example, and i have corresponding data in columns to the right of this, say just column B for example- I also have a header on column B which counts the data in column b. (just a COUNTA, counting occurences of 'x' )
my issue is this: i need to limit the range of the COUNTA dynamically- by the number of serial numbers in column A. for example: if i have 10 serial numbers, i want my COUNTA range to be B1:B10 (excluding header) and... i need this to be a built-in formula, NOT a VBA macro. i need it to update automatically, as soon as another serial number is entered. i've tried using references to named ranges and all sorts of language tricks, and i cant seem to get it to work. (such as:
' =counta(b1:namedrange1)
i'm going to have to do the same thing with COUNTIF's, so if that is also easily explainable,
i Am trying to get this project underway and can attempt this manually in excel but will take ages. I was wondering if there is a code I can use. I am trying to get a 7 character alphanumeric serial number for units as a 4(alpha) and 3 numeric number. like say AAAA001 , i want to list on a row all the numbers on a sheet right upto ZZZZ999
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
I need to match cells e3:h3 whenver the dates change in in cells c5:c9 and then put there result of cells b5:b9 into the corresponding cells of e5:h9.
Basically what I'm saying is that I want to keep a track of all previous pay amounts from each pay period. So when the next period changes the date it also copies the new pay amount to the corresponding date of the previous pay section.
I have an Excel workbook with around 100 worksheets. All of them have similar columns, but the values are stored as text. The length of columns and missingness is different in different worksheets. I will be grateful if any of you could suggest a VBA that could convert the numbers stored as text back to numbers. I have been looking for an answer for a while, but cant seem to find one that automatically looks at every worksheet and converts text into number.
I am looking for a formula which will sum numbers with less than symbols in front of them (i.e. they are text cells), and then replace the less than symbol again in the summed cell if initially present. The problem is that not every cell contains a < symbol, some of them are just numbers, and not every column contains a < symbol either.
e.g. I am looking for a formula which if entered in row 5 of this example would give these answers.
My spreadsheet is multiple rows and columns of sales data with two blank rows between salespeople. Ex:
$100 ABC Inc. John #101 $150 XYZ Inc. John #101
$200 Golf Inc. Sue #102 $150 BBall Inc. Sue #102
What I need is this:
$100 ABC Inc. John #101 $150 XYZ Inc. John #101 $250
$200 Golf Inc. Sue #102 $150 BBall Inc. Sue #102 $350
Where the sum of each salesperson's sales figures is shown and formatted. I've been doing this manually. I'm having difficulty figuring out how to do this using VBA. I can do the formatting, and conceptually I see what needs to be done.
I have a long list or work items that I track on a log on daily basis.Some work items are repeated twice or trice to input a certain comment.Therefore, when I try to calculate the total number of work items for the day using counta formula, if results in an inaccurate total since certain work items are repeated twice or trice. The work items consist of a 8 digit number.Example 8876098.
I have column of cells containing entries such as V1, V3 and V7. I'm trying (and failing) to come up with a formula to separate the numbers from the letters and add them together: V1, V3 and V7 would together give 11.
I can use the MID worksheet function to separate my numbers from my letters on a row-by-row basis, but I can't work out how to do the whole thing in one fell swoop. =SUM(MID(A1:A10,2,2)) doesn't work, for example.
the last 4 caracters are numbers. I need to test these numbers and sum the corresponding values them in a single cell without adding new column(SUMIF like).
so in the above example I need to sum all ending at 1244 or 1519, therefore the sum showed in the single cell equals 225
to extract from a single cell: =VALUE(RIGHT(D8;4))
I tried to use an array formula but it seems to crash if a blank cell is in the array
At work, we've got a program that outputs the results of a search into an Excel file, in column 1 below.
17,43,61,63 17 43 61 63
23,29,53,57,77,79 23 29 53 57 77 79
17,29,63,69,71,75,79 17 29 63 69 71 75 79
11,43 11 43
57 57
I need to get that list of numbers listed out to the right, with one number per cell. The list in column one could possibly contain from 1 to 20 numbers, and the last number is always without the comma after it.
I currently have a cell with a formula like this: =C5*B4 + F5*E4 + I5*H4 + L5*K4 ie the columns in each couple increase by 3. I now want to add more source cells say like this: =C5*B4 + F5*E4 + I5*H4 + L5*K4 + O5*N4 and possibly onwards. Is there a way of doing this in some kind of shorthand? =LOOP(C4,stepH,stepV,noOfSteps) * LOOP(B4,stepH,stepV,noOfSteps) or something?
I'm not sure if this can be done but if I had the numbers 1, 2, 3, 4 and 5 in cells A1, A2, A3, A4 and A5 respectively, is there a formula that I could put in another cell to display "12345"?
I was playing around with the consolidate function, but I couldn't get it to work, and it's not a formula, it is done after the fact. (PS. I've got no idea about macros)