my spreadsheet has duplicate serial numbers in column A and the corresponding row in column B has mutliple descriptions for the same serial number. I need to combine those descriptions into 1 cell rather than having multiple rows for the same serial number. is there an IF formula that I can combine with a concatenate that will capture what I need?
View 1 RepliesI have a spreadsheet with a list of about 3800 lines of dollar values in "K" that correspond to various serial numbers in "E".
These serial numbers come up multiple times at different place throughout the 3800 lines.
I know by using SUMIF I can calculate the total value of each serial number, but is there a way to bring the serial numbers across to correspond to the sum of the dollar values?
I have in my sheet from C13 to C350 many serial numbers which I manually type them in. These serials are 5 digit numbers, and I was just wondering if there's a function or formula that will not allow duplicate numbers in that column.
I have a column that looks like the following and I need to add the numbers:
27 skids
31 skids
56 skids
13 skids
The unit "skids" is constant. The answer I am looking for is "127" or "127 skids"
I am looking for a formula which will sum numbers with less than symbols in front of them (i.e. they are text cells), and then replace the less than symbol again in the summed cell if initially present. The problem is that not every cell contains a < symbol, some of them are just numbers, and not every column contains a < symbol either.
e.g. I am looking for a formula which if entered in row 5 of this example would give these answers.
A
B
C
D
1
<0.001
<0.1
0.2
<0.01
2
<0.0001
0.1
0.2
<0.1
3
<0.0001
<0.2
0.2
<0.1
4
<0.001
<0.1
0.2
<0.01
5
<0.0022
<0.5
0.8
<0.22
I have unit measures that are converted across four columns (FT, SQFT, SQM and SQY).
THere are three units in rows (BOX, Skid and Roll). I am trying to identify in a column labeled "Duplicate Volume" with a formula stating "YES" if there are duplicate numbers (volumes) in any of the four conversion columns listed above. I tried to attach an excel file here but the system will not accept it. Hopefully the diagram i make below will be enough to understand the concept:
Unit Name FT SQFT SQM SQY Duplicate?
BOX 0 0 15 0
BOX 0 0 20 20 YES
Skid 0 10 10 10 YES
Skid 0 0 0 15
Roll 100 10 2 1.5
Roll 0 0 40 40 YES
I have over 50 thousand rows of this stuff...so looking at the data to decide if there are duplicates will not happen.
Any formula that i can put in the column titled "Duplicate" that can identify the duplicates with a "YES" in the cell where duplicates are found?
I have a dynamic list of items which I have to assign serial numbers to.
If the serial numbers go in sequence, it would have been easy.
But the problem is, they don't.
They go from A1 - A9, B1 - B10, C1 - C10 ....
Is there a way I can assign an array to ensure that once the macro hits A9, it starts from B1, and once it hits B10, start from C1?
I have one page in excel to print. But I want to print it 1000 times and on each paper i need another serial number. How do I do this?
View 4 Replies View RelatedSheet4 in my book looks like this:
.............A.......................B................................C..................
I......Invoice No…..…Starting Serial No……...……Ending Serial No
2…………ND12………..6011000000013652……. ..6011000000103652
3…………ND13………..6011000000116526……....6011000000246977
4…………RF4……….….6006000001255724……..…6006000011249564
5.........RF4...........6005000000023652.........6005000000095624
note that the last 4 numbers of the series are randomly generated for security reasons and are not part of the range of the the serial No’s
So Invoice ND = 10 consecutive numbers, Invoice ND13 = 14 and Invoice RF4 = 1000 and RF4(again) = 8
The list on this sheet is a mile long
What I need is a “search box” with two windows in it
In one box I will type a serial number and in the second box I will get the Invoice number
The challenge is that the serial number could be between Starting and Ending serial No’s thus if I were to type serial number
6006000001086598 in the first box the answer in the second box will be : RF4
I am trying to get Excel to write a series of incremented serial numbers to an external program.
I need 10 per line, then for the code to send ENTER and start writing on the next line. Following is my current code:
For i = 0 To qty - 1
SendKeys prefix_sn & next_sn + i & ","
Next i
I have repeating 7 names in A column.(Like a name group)
Each group names repeating after a blank(empty) row.
I want to write to B column for each repeating names from 1 to 7 as number value.
I have a userform for keeping records and would love to incorporate a new feature. I would want to generate a random serial number for each entry made with the userform.
View 2 Replies View RelatedI've modified this macro I found on this forum, all it does is compares 2 lists of 6 digit serial numbers and and then tells me which numbers are in list 1 that are not in list 2.
However, I want to modify it so that it also gives me the numbers in list 2 that are not in list 1 (put into column F). I then need it to cut the matching serial numbers (in columns A and B) from sheet 1 and paste them into sheet 2.
Put serial numbers against row like above either by the help of formula or either by VBA code.
SrDePNo.Truck No.Vehicle Type
16384LZR7793SM
46385TLC964C
56386LES7540T
66387LES4982T
76388LES 6509T
86389K4470T
96390LWC3070SM
-6391LWC3070SM
106392AJKA 7595T
116393RIC8879T
126394W1649T............
I have a table that is 94 columns *12 rows each cell has a different number I need to find a way to duplicate the table but with the numbers in each of the cells doubled.
View 3 Replies View RelatedI want to make continuing serial numbers in excel in order to print labels to be able to track my deliveries. i know i can drag the fill cursor to automatically make it go the next number. however i also want my serial number should represent the month and the day the invoice was printed.
for example i want the serial number should be
column a (Jan 01) column b (Jan 02 ) column c (Jan 03)
a1-01-01 a1-02-01 a1-03-01
a1-01-02 a1-02-02 a1-03-02
a1-01-03 a1-02-03 a1-03-02
The first number represents the month (example -a1 for Jan)
The second number represents the day and
The third number represents the invoice
How can i make that when i pul the cursor down it should continue with the invoice number
However when i continue right it should move the day number?
i have a list of serial numbers in a column, say column a, for example, and i have corresponding data in columns to the right of this, say just column B for example- I also have a header on column B which counts the data in column b. (just a COUNTA, counting occurences of 'x' )
my issue is this: i need to limit the range of the COUNTA dynamically- by the number of serial numbers in column A. for example: if i have 10 serial numbers, i want my COUNTA range to be B1:B10 (excluding header) and... i need this to be a built-in formula, NOT a VBA macro. i need it to update automatically, as soon as another serial number is entered. i've tried using references to named ranges and all sorts of language tricks, and i cant seem to get it to work. (such as:
' =counta(b1:namedrange1)
i'm going to have to do the same thing with COUNTIF's, so if that is also easily explainable,
i Am trying to get this project underway and can attempt this manually in excel but will take ages. I was wondering if there is a code I can use. I am trying to get a 7 character alphanumeric serial number for units as a 4(alpha) and 3 numeric number. like say AAAA001 , i want to list on a row all the numbers on a sheet right upto ZZZZ999
View 5 Replies View RelatedHave exported oracle DB data in an Excel sheet. There is a column with text and numbers in it. I need to get out the serial numbers of this text columns of up to 12000 data fields.
My problem is that the serial number is not always the same format. There might be also two serial numbers in one text field.
One cell can look as the following:
GEYSER BURST - SERIAL NO:102 15712, 10 AUGUST 2005,150 LITRE SUPA-FLOW, EASILY ACCESIBLE. App made for today as per Victor ( Notes by Pamela on the 18/07/2008 13:30)
Out of this cell the Serial No is 102 15712.
There are other formats like:
550501 009879
H 100107452
H100/110230
Sometimes there are only four or five numbers or there are special characters between the numbers like - or /.
I would like to seperate these serial numbers in a seperate cell. There might be also a cell without any serial number in it.
Is there any other way to get these numbers out except of doing it manually?
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
A
B
C
D
E
F
G
23445566894 Brwn pdc aft
Cat1
45687930596
$5
45687930596 Gld wdget adi
Cat2
23445566894
$6
In the example above, I would like to do a vlookup in column C that matches the digits in column A to those in column F, with the output being the corresponding value in column G. I believe it involves the left function but not sure how to really use it here.
I have a large worksheet and I managed to duplicate data in a row of cells.
MOT 1/F1,
B/P 1f2,
B/P 1f2
In the string above I need to delete all text from the first comma to the end of the string so the above would look like:
MOT 1/F1
This is an example in one cell of many. The text prior to the first comma may or may not repeat and it is the only portion of the text I wish to keep. The first comma is not always in the same place (character count position).
I'm on Excel 2003 and have a sheet to track people who have read my emails. I want to know the answers to the questions below. I've included a fake sample to show what I'm looking at. The number of cells in each column is much higher and not the same per column. I've tried variations of MATCH, VLOOKUP, SUMPRODUCT, etc. but haven't found a good way to set up a formula.....
View 6 Replies View RelatedWhat i'm trying to do is i would like to compile in 1 column all duplicate values from multiple cells.
ex. A1 to 10 is numbered 1 to 10 respectively, B1 to B10 is numbered 6 to 15 respectively. which means in A1:B10 the duplicate values are 6,7,8,9,10. i could like these number to show automatically in C1 to C5.
I am new to VBA but I am trying to insert text and lock all duplicate cells except for the first one. Below is the macro I am trying to make. I keep getting an error on the line:
If(COUNTIF($A$9:$A$76,A9)=1,FALSE,NOT(COUNTIF($A$9:A9,A9)=1))
This is my macro:
Sub SetVoters()
'
' SetVoters Macro
'
'
Sub SetVoters()
'
' SetVoters Macro
'
'
ActiveSheet.Unprotect
[Code] ......
I have a cell with the following text in it that is being imported from a website "5/1 Smith T win". What i want to do is extract the "5/1" part without it being in the format of a date. I want it to be extracted in the format "?/???". I have entered the following formula to extract the "5/1"
View 2 Replies View RelatedI generated my urls to online photos, I referenced cells where some are only numerical (ex. 479) while others contain a numerical/text mix (ex. 3014-RACK). Here is my url code in excel...
View 10 Replies View RelatedI have a spreadsheet where i do need to count cells values that are formatted as text but i do need to ignore the real text in some cells, in this formula i do need to add values depending of the adjacent cell.
I have attached a example : New Microsoft Excel Worksheet.xlsx‎
My Excel program (Excel 2010) currently has several columns and each column looks for and pulls data from a specific file on my computer. Then I need to delete any duplicate data entries, count the number of unique entries and track the changes through a chart. I have everything done except I cannot figure out (or find on the internet) a way to search in multiple columns (more than 2) and delete just the duplicate cells. I want to delete the cells in a way where there is one left. For example if the code 12gf is duplicated three time, I want to be left with one 12gf (it doesnt matter what column the original one is left in). Additionally, column length changes and they are not sorted. I have attempted to attach an image of an example file below.
View 14 Replies View RelatedI have a sheet(s) that have numbers as text. I need to convert them to numbers...Each of the four sheets have four columns of different lengths and different column numbers.
Multiplying them by one will convert them, but I want to do it efficiently.
Was thinking maybe a "change by value" formula in the worksheet with a "dim" and a "Loop" ....