How to use Pivot table and its features in VBA. Lets say i have a data as shown below.
Col ACol BDataVolumeAAA10BBB20CCC30CCC40CCC50CCC60AAA70AAA80BBB90
I would Like to have a VBA code using Pivot where Unique values from Column A is taken and its sum of the volume in it (as shown below).
Col CCol DDataVolumeAAA160BBB110CCC180
I have a list of purchase order line items. Each Purchase order could have multiple line items, so the list could have many occurances of the same purchase order number. I have designed a pivot table which summaries line items by ordering area (one of the fields in the list).
This works fine but what I would also like to check is the number of purchase orders by area. How can I acheive this? I would prefer not to use any helper columns but will adapt my application if this is needed.
I have a spreadsheet with several records for each person's name.
I want to have pivot tables based on various columns, with the data field being a count of unique occurrences of a person's name.
When I set up a basic Pivot, it counts each occurence of the person's name.
I have a worksheet with a list of employees and the workgroup they belong to, along with other data like manager, start dates, etc. Recently a couple of the workgroups were duplicated (change in managers), so these employees are showing up on two rows even though the workgroup has the same name. The only differences in the two rows are the workgroup effective start and end dates. I need to be able to count, in a pivot table, the number of unique employee/workgroup combinations there are per workgroup. I can add columns to the sheet, but it's a dynamic set of data that will grow each time it's refreshed...
View 9 Replies View RelatedI'm trying to create a pivot table that will count how many employees have completed a Learning Plan. This task becomes complex (for me) because each learning plan has multiple Courses, each Course has a status of "Completed" or "Incomplete". A Learning Plan would only be considered "Completed" if all the courses within that Learning Plan were completed. In doing some research, it looks like I'll need to create another column of data, that shows per employee, per Learning Plan, if the entire Learning Plan has been completed, but I'm not sure of the best way to go about this. Please find SampleData attached.
View 5 Replies View RelatedI have a set of data that I'm trying to identify the unique values in a column and then sum the related quantites against each of those values:
View 14 Replies View RelatedI have data that has a customer name and the month that they were taken care of" (of course not spaces
Customer Month
Smith January
Smith January
Mark January
Suzy January
Smith February
Mark February
I want a pivot table to say:
Month #customers
January 3
February 2
but when I do the count it adds the total number of customer names and gives (it is counting smith twice in January
Month #customers
January 4
February 2
I was reading something about doing the count (so it shows 4) and then doing an index within the count but I keep just getting 1 as the value (for both months).
I tried doing a formula in the document that said =IF(ISERROR(MATCH(A2,$A$1:A15,0)),1,0). basically looking to see if the name is above the location I am looking at and if it is to put a 0 if not put 1 and then do a sum of that column....trouble is that when a customer has orders on more than one month, the second month is coming up with a 0 instead of a 1 (and this happens quite often).
I am not sure what to do. if the customer shows up in more than one month I want them to count towards the unique count of both january and february...we look at each month separately.
I have data set up like the example but then for 1797 lines.
D39BKYes
D39BKYes
D39BKYes
D39BKYes
GHFLBNo
R80FANo
R80FANo
[code].....
What I need to get in a pivot table is: two columns or rows (Yes / No) and the unique count of the code.In this case is should show Yes: 2 and No: 3
How do count unique values in category in pivot table. (my table, im taking data from ms query). I am using excel 2010
Pivot table example: the result i want is the "no of types" as my data only show "category" and "types".
Category
Types
No of Types
Fruits
Apple
Pear
Orange
3
Vegetable
Cabbage
1
I use the following formula to count unique values within a group for a pivot:
=IF(SUMPRODUCT(($CO$2:$CO55681=CO55681)*($E$2:$E55681=E55681))>1,0,1)
When I paste values over the formula it takes around 1 hours to do the 70k cells which is excessive. I want to know if there is a way to speed it up?
I tried doing an =cell and then paste special that and it works really fast but when I delete the actual formula's again the whole sheet locks up.
If I have multiple entries with different but repeatable text values in one column - how do I count all unique ones ? Is there a function or does it have to be a pivot table of sth ?
View 14 Replies View RelatedI want to have a unique count field in my pivot table. I already read (via forum search) that this can only be achieved by adding an extra column to the database.
The problem is: I have no clue which formula to use for this column. Please have a look at the attached picture. Can someone provide me with a formula for this example?
I have a pivot that shows Patients, Invoices and charges. I want to throw Patient, Inv # and charge amount in the row area and put PatientId in the Page area as a count. It works fine except it double counts patients with more than one invoice...I want a unique patient count.
View 9 Replies View RelatedCould someone let me know if my suggested formula below will calculate the number of Unique records that represent either an A or a B.
=SUMPRODUCT((B5:B14="A")/COUNTIF(A5:A14,A5:A14&""))
Although it is giving me the right answer here I am not confident it is correct.
I have the following data:
TRX_IDQTYCUST_ID892486021-67.991623230892486140-35.411623230892486378-29.271623230892486515-60
.711623230892488006-69.081623230892488082-43.261623230892486668-31.091623230892486794-27
.0562118898892546057-42.829337675892487417-19.331623230892487513-33.251623230892488890-33
.61719407892543537-13.891623142892544321-11.021623142892487602-18.921623230
Would like to know the number of unique customers (CUST_ID) have purchases and the sum of those purchases and how many transactions:
CUST_ID Sum of QTY Count of Transactions
50 $2000 1500
I cant seem to find how to do unique Cust using a pivot table - it just gives me a count of cust which is the same number as the number of transactions.
The pivot table has only two columns, the first is the identification number and the second is the count of the identification number. I am trying to get a count of the number of identification numbers, not how many times it was entered in the spreadsheet (some numbers are entered more than once on different days). It currently looks like:
Column A Column B
00000001 1
00000002 1
00000003 2
00000004 1
00000005 3
Grand Total 8
I'm trying to arrive at 5 for the answer, so that each number is only counted once even if used more than once.
I have 2 columns. One with a store number. The other with an item. I need to get the count of each item for each store. So:
Store, Item
1, Cashier 1
1, Cashier 2
1, Cashier 2
1, Photo PC 1
1, Cashier 1
1, Cashier 2
2, Photo PC 1
2, Cashier 1
2, Cashier 2
2, Cashier 1
2, Photo PC 2
2, Photo PC 2
2, DriveThru 1
3, Cashier 1
3, Photo PC 1
3, Photo PC 1
3, Photo PC 2
I would like to get to
Store, Cashier 1, Cashier 2, Photo PC 1, Photo PC 2,
1, 2, 3, 1, 0
2, 2, 1, 1, 2
etc....
How can this be done?
Found what it think is the correct methodology (Pivot table) for doing this, but I'm struggling to apply it.
I have a very simple excel 2007 document that has one column with multiple rows;
blue
Blue
green
red
red
green
Green
blue
red
Blue
blue
Bleue
Rouge
red
Bleue
I would like the easiest way to count the total of each and sort in highest first,
e.g.
red 4
blue 3
Blue 2
green 2
I need a Macro (not formula) which compares the comma separated values present in Column "I" with individual values present in Column "D" and generate the count of unique values in Column "J".
The sample sheet has been attached for reference.
I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)
The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.
Sample data Required Output
A | B Z
1| 10 | a 10,a,b,c
2| 10 | b 11,a
3| 10 | c 12,a,b
4| 11 | a
5| 12 | a
6| 12 | b
My system is Windows 8 Excel 2010.
1. Using a formula, I am trying to to obtain a list of unique values (string) (caveat: see #2) from the range E2:E10000 (arbitrarily chose 10000 - the row number is variable)(see #3).
I currently have a formula that seems to work for this purpose but I don't know how to add the condition in #2 (below)
2. To include all unique string values except those starting with the letters "IC"
3. Is there a way to make this formula so that it can only seek values up to the last row, and not go to the 10000th row if not necessary? The E column has no empty cells until after the last row that contains data.
Here is the formula I currently use which serves #1 (above):
[Code] .....
Any way to improve/simplfy this formula for the purpose describbed in #1? How can I add the condition in #2? Can you see a way to include #3? The most important issue here is #2.
Example of desired results:
Column A | Column B
AA | AA
DD | CC
AA | DD
CC |
DD |
DD |
IC |
IC |
I'm running into an issue trying to calculate unique values in a Data column based on a few variables in other columns.
My current formula in Summary tab D4:D19 is
{=SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$H$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))
+
SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$I$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))}
This is currently counting the number of times a date value (data column I) appears for that name (A4:A19) in the data when meeting all of the conditions. I need it to instead count the number of times a unique date appears for that name with the additional conditions met (which all appear to work fine).
The results in the pink highlighted cells (Summary column D) should be:
Names starting with A - 3
All others - 2
I've left some other columns in the data with X's so that I can easily convert this back to my working spreadsheet.
I have attached an example of what i am trying to do. I can work out how to calculate unique entries by putting in a formula under a pivot table, but is it possible to select an option in the pivot table settting which will give this result?
View 2 Replies View RelatedI have a pivot that shows Location, Dept and Total Sales by month. So Location and Dept are in the row area, Period is in the column area and Total Sales are summed in the page area.
Well, they decide they do not want to see Dept: 999 on the pivot. Thats easy, just click the dropdown and uncheck it....they are amazed at my ingenuity!
Well, they then notice Dept: 999 is no longer included in the Location total or grand total....makes sesne to me I say!
Well, they then specify that Dept: 999 should NOT appear on the pivot but SHOULD be included in subtotals / totals.
I have 12 columns of data. In those 12 columns of data I have 3 digit numeric IDs. I want to count the unique number of IDs for each row. I have about 14K rows.
What would be the best way to do so?
Some rules about how the data is stored. I have 12 columns of data with anywhere from 1 to 12 columns having data for each respondent. Data always fills left to right and never skips columns.
I have attached an example file that represents how the data is stored and the output I would like (Unique Count).
I am looking for a way to extract all of the unique items in a Pivot Table. For example, I have a Pivot Table that has category A items and category B items. There may be several B items to one A. For example:
A0
B1
B2
B3A1
B3
B4
B5
Now, what I need is a list that looks like this:
A0 - B1
A0 - B2
A0 - B3
A1 - B3
A1 - B4
A1 - B5
Formatted so that those are two columns. However, in Excel 2007, I cannot set the option to have it repeat the A series items in the Pivot table. Is there some easier way to do this?
I'm trying to count how many production orders i have per week. However, there are duplicated production orders per week. I only want to count how many unique orders there are for each week. I only see the ability to "Count", which counts my duplicates as well so it over inflates my true quantity.
View 3 Replies View RelatedIs there a field setting in pivot tables to return the number of unique records?
Is there an excel formula to define a range of cells, and returns then number of unique records: (i.e =Unique(A1:A10)?
how to get this with formula:
Column A - - Column B
a - - - - - - - a
a - - - - - - - b
b - - - - - - - c
c
c
I have an array that I'm using - and it works perfectly: =SUM(If((FREQUENCY(If(LEN(B10:B100)>0,MATCH(B10:B100,B10:B100,0),""),If(LEN(B10:B100)>0,MATCH(B10:B100,B10:B100,0),""))>0),1))
Now, what I would like to do, is see how many of these unique numbers relate to another number in column D
See attachment.