I have a row of numbers that I want to sum. However some of the data could not be retrieved and that means in some cells in the row of numbers contain the message: " #VALUE " and when doing SUM it returns #VALUE
View 4 Replies
I have a problem in terms of summing unique numbers in a set of reoccurring numbers. Due to the restrictions in the spreadsheet I am unable to use a filter / advanced filter or pivot table. What I basically want to do is sum every time there is a different number. In this case it's:
37.85+80.61+129.38+185.85+1259.69+104.96
The unique numbers have a maximum of 6 and a minimum of 3. Is there a generic formula that I can apply so that it only counts / sums the number once. I can use VBA code or just a simple array. I'm just not familiar with any sort of functions that can do this.
37.9537.9537.9537.9580.6180.6180.6180.61129.38129.38129.38129.38185.85185.85185.85185.851259.691259
.691259.691259.691259.691259.691259.691259.691259.691259.691259.691259.691259.691259.691259.691259
.691259.691259.691259.691259.69104.96104.96104.96104.96104.960.000.000.000.000.000.000.000.000.000.000.000.000.000.000.00
I have a process that generates the value X in cell A1 randomly. So I can change the value of X in A1 by clicking on F9. I want to sum a sequence of X values. I can do this by manually copying each X to a row of cells and then summing the row values. But that is tedious. Can the summation be done automatically without being regarded as being circuler?
View 8 Replies View RelatedI want to sume numbers that may or may not be in several cells. If I use the function SUM and one of them is missing, I get an error.
Example:
A1=2
A2="empty"
A3=5
I want the sum of A1+A2+A3 to be 5
I have a column of numbers (each cell represents number of chicken eggs produced daily). Column data runs from K9:K415
I want a formula in column M starting at M9 whereby cell M9 sums up the total number of eggs for the week (i.e. sum of K9:K15), then I want to copy that formula down, such that M10 shows the sum total of eggs for the next week (which is sum of K16:K22) and so on. Thus summing up every 7 rows of data in column M.
I have been playing with the SUM and OFFSET functions but can't quite nail it.
The series 1,3,6,10,15,21,28,36 ("A" series) is the ongoing sum of 1+2+3+4+5+6+7+8 ("integers") and naturally goes on for as long as on chooses. I am only interested in the numbers up to 100.
Is there an Excel function that will allow me choose any integer as a starting point and any higher integer as an ending point and provide the sum of the "A" series associated with the two choices.
For example: If I begin at 6 and end on 12 it would give me 308 =28+36+45+55+66+78
00
11
23
36
410
515
621
728
836
945
1055
1166
1278
1391
I have a list of 100 songs and the artists that sing each song.
What I want is a formula that will look at the rank that it finishes with and assign it a different number (e.g. the song that finished at number 1, has a value of 100).
As there can be multiple songs by the one artist, I need to add them ALL up and have a total score for each singer/band.
e.g.
1 Powderfinger - My Happiness (100 points)
2 U2 - Beautiful Day (99 points)
3 Powderfinger - My kind of scene (98 points)
4 Wheatus - Teenage Dirtbag (97 points)
5 Coldplay - Yellow (96 points)
So Powderfinger would have 198 points and the other 3 would have 99, 97 and 96.
The band names are in one column and the song names are in the next column.
I would need to get this next thing working:
H I J K L M N O P
Type No. No.Points Points/RN Points/KR Points/KV Points/ER R/V Total
5 KV 12 4 2 3 4 6 0 8
6 RN 90 18 3 4 5 8 0 26
7 KV 12 4 4 4 5 6 10 13
8 ER
9 KV
10 KR
...and so on, with the following logic
If Type = KV, then P$ = sum(J$,M$,O$), but if it is something else, like RN, then it needs to sum J$,K$,O$
I've tried using the following:
=IF(ISNUMBER(SEARCH("KV";H2));SUM(J2+M2+O2);0;IF(ISNUMBER(SEARCH("ER";H2));SUM(J2+N2+O2));
but only the two first ifs work, which is kind of logical, since the second if is the "value if false" statement. Is there any way to get this to work?
I have a spreadsheet which has data in rows. I need to sum the first 5 values from the left of the range which are greater than zero. BUT if there are less than 5 non zero values present I want to sum from the right of the range.
First condition:
1 2 3 4 5 6 7 8 9 10
The function would return: 1+2+3+4+5 = 15
Second condition:
0 0 0 4 5 6 7 8 9 10
Function would return: 4 + 5 + 6 + 7 + 8 = 30
Third condition:
0 0 0 0 0 0 0 8 9 10
The function would return: 10 + 9 + 8 = 27
I have had success with:
=B4+SUM(SMALL(IF(I4:O4<>0,I4:O4),ROW(1:5)))
(using ctrl shift enter)
BUT it crashes when faced with the third condition.
I would also like to avoid ctrl-shift-enter functions if I can as I don't have much success copying them around the spreadsheet.
I have an unusual situation which is best explained by way of an attached example.
In summary adding and subtracting four cells containing integer values outputs an unexpected non-integer value, which should in fact be zero.
The situation is best explained by way of example which I attach to this post : Excel Problem.xlsx
Basically, Cell E1 should be zero.
I added an attachment. Column A is my "week number" and column E is my sales amount.
I'm trying to create a formula that sums the sales amount, only if it corresponds to a certain week number. I know sumif formulas, but can't get them to work well for this. For example, I want it to sum all the sale that happened in week one, then all the ones in week 2, then all the ones in week 3, and so on. There has to be an easier way than doing a sumif for each individual week and manually changing the week number in the sum if formula.
Could there be a character you can use in a formula to make the sumif week number "running?" So you could then just type in the formula once and pull it all the way down for the year, so the formula will work for the every week throughout the year?
Column A: Start Date
Column B: End Date
Column C: Ethnicity Code (letter and number such as B1)
Column D: Hours
What I need to do is work out how many hours each ethnic group did in a specific month.
Product Group Arg.Braz.Mex.Peru
Red paint Paint5324
Blue paintPaint5684
WallpaperWallpaper6585
LampsFurniture 4631
ChairsFurniture 1645
Green paintPaint1356
SofasFurniture 3358
SUM(Paint,Argentina)SUM(Paint,Brazil)SUM(Paint,Mexico)SUM(Paint,Peru)
SUM(Wallpaper,Argentina)SUM(Wallpaper,Brazil)SUM(Wallpaper,Mexico)SUM(Wallpaper,Peru)
SUM(Furniture,Argentina)SUM(Furniture,Brazil)SUM(Furniture,Mexico)SUM(Furniture,Peru)
I am trying to work out VBA code or another way in Excel to find a solution for this problem - I need to be able to sum up the values that I have posted below - so for SUM(Paint,Argentina), this would be the sum of the red paint, blue paint and green paint values under the Argentina heading, that are all categorised into the 'Paint' group. The same follows for all the other categories. I was trying to use 'Defined Names' to group the categories together, and so would then do =Sum(Paint). However this was not allowing me to sum by each country, and the 'Create from Selection' naming tool was not naming all of the values for Paint (blue paint, red paint, etc.) under the paint category.
This is an incredibly simplified version of the data I am actually dealing with - I am doing this for 70 country columns and 250 rows of product categories.
I have cell A1:A25. each with a number, and the same text "Hour(s)" So cell A1 would be 24 Hour(s) and so forth down to cell A25.
Due to the sheet being large, I can't just insert another column to list the text. I need for cell A26 to sum the numbers ignoring the test in the cells. I searched to forum, but didn't exactly find anything that works correct.
I do my indoor cricket team stats and I am having some trouble figuring out what formula to use in order to be able to sum a row of numbers where some cells may contain text and numbers or just text.
Please see the attached spreadsheet to understand what I'm talking about.
In the batting tab, when the batter gets out, they lose 5 runs. Outs are noted by St, R, B or C. In terms of runs, the scorers put wides and noballs to the batter on strike which are noted by W or N and this is worth 2 runs. Sometimes the batter on strike will get runs off a W or N so it's noted down as W+2 (which would give 4 runs) etc. So what I need to be able to do in the batting sheet is sum the total runs and count the number of outs.
In the bowling sheet, it's the same story as the batting tab, but I also need to be able to sum the number of extras given and count the number of wickets taken.
[URL].....
I am looking for a formula which will sum numbers with less than symbols in front of them (i.e. they are text cells), and then replace the less than symbol again in the summed cell if initially present. The problem is that not every cell contains a < symbol, some of them are just numbers, and not every column contains a < symbol either.
e.g. I am looking for a formula which if entered in row 5 of this example would give these answers.
A
B
C
D
1
<0.001
<0.1
0.2
<0.01
2
<0.0001
0.1
0.2
<0.1
3
<0.0001
<0.2
0.2
<0.1
4
<0.001
<0.1
0.2
<0.01
5
<0.0022
<0.5
0.8
<0.22
I'd like automate consists of entering 56 numbers (up to 3 digits, 000-999) and finding the difference between today's numbers and yesterday's numbers. Then multiplying each difference by a set number (i.e. 1, 2, 3, 5, 10, 20, or 25). These numbers may, from time to time change (i.e. the 32nd entered number may be multiplied by 3 for 2 months, then we might swap out a product and then need to multiply by 5, etc). At the end, I need all 56 differences multiplied by their individual respective multipliers totaled. This needs to be done daily using previous days numbers and be able to change the multiplier without effective previous data.
I was trying to to this myself by Column 1 = multipliers, Column 2 = yesterdays' numbers and Column 3 = today's numbers. The calcualtions are done by excel and a total is summed. This I can do. However, each day i'd need to make a new file and enter yesterday's and today's numbers. This is time consuming. I'd like a system where I can just entere today's numbers and any changes to the multiplier and it will spit out the total.
If anyone can guide me or point me in any direction to accomplish this automation. I would greatly appreciate it. I'm pretty computer savvy, but just have not had the time to dwell into Excel.
For those interested in what this is for: I have a small business that sells instant lottery tickets. Each day we have to figure out the number of tickets sold the previous day. We have a notebook and manually write down numbers, do the substractions by a calculator and total. The table in the notebook is seperated by ticket values (i.e. $1 tickets, $5 tickets, etc). However, certain tickets run out or occasionally we need to move tickets to a different spot, thus the MULTIPLIER in the automated system would need to change.
I'm looking to do the following below: column A would have numbers, column B would have words and a few columns over i would have the total of each same word
column A column B
60house
120car
30misc
52.25food
83.33gashouse 180.25
120.25housecar 120
25miscmisc 55
105foodfood 157.25
50.5gasgas 133.83
Imagine column A sorted by invoice numbers. Column B has payments applied but due to movement between unapplied cash, some numbers appear as negatives and positives for the same invoice number.
I want to have a formula which says that for each invoice number, look in column b and eliminate opposite numbers and post only unique values. Keep in mind that there may be multiple lines with the same invoice number.
For example, starting with line 5, for invoice 123, payments 400 and -400 in line 5 and 17 and payments 315 and -315 in lines 7 and 9 will zero out but any other unique payment will be picked up and displayed in column C. Lines 5 and/or 17 will be blank in column C.
I'm a basic excel user really and cannot find a function that will allow me to complete the following:
CELL A1 includes the following sequence of numbers: 1,2,1,0,2,3
I would like to know how to put a formula/function into CELL B1 that sums up the sequence of numbers in CELL A1 (i.e 1+2+1+0+2+3)
I am trying to sum up a list of cells that have formulas attached so if there is no number in the formula it shows up as #N/A how do I make it so wherever there is an #N/A it equals 0?
View 9 Replies View RelatedThe formula is designed to sum a set of data based on 22 variables between a certain date range. In order to keep the formula manageable, I have grouped the variables into arrays.
EX.
Array 1. - 20 potential choices (Service codes)
Array 2. - 2 choices (pkg types)
Array 3. - 2 choices (volume type)
Array 4. - 3 choices (company names)
Each array (listed horizontally on one spreadsheet) calls a specific column of data to match from a different worksheet. I have no problem if only applying one array but multiple arrays return incorrect values.
I have a table that have a test or character and value (number) like
A 5
B 6
C 3
And another table that has a set of characters that I want to sum the value of the characters like
A B C 14
So that the result of summing the characters will be in the next cell.
I am having real trouble with a formula.
I have used a similar formula for to calculate a column.
Can any one see where I am going wrong. It is the cell highlighted in yellow on the attached spreadsheet.
I'm having a problem summing after running arrays to analyse data. I have a list of four possible outcomes and I need sum up the totals, but sometimes there are no results, so there is #DIV/0 in the list I need to find the total for.
is there some code or some kind of formatting that would give me a total even if #DIV/0 is in the list?
Is there a easy way to sum a column of numbers in excel and ignore hidden rows?
View 9 Replies View RelatedI'm working with a worksheet with 4000+ rows, so I'm looking for a formula to automate a summation. In Worksheet1 (4000+ rows) I have data from 1998 to 2008 for each month and day:
Year Mo Dy Data
1998 1 1 41
1998 1 2 35
1998 1 3 79
...
2008 12 29 39
2008 12 30 81
2008 12 31 42
In Worksheet2 (365 rows) I have data for just months and days:
Mo Dy Sum
1 1 94
1 2 103
1 3 222
...
12 29 65
12 30 211
12 31 98
I'd like to take each Jan 1 datum for each year from Worksheet1, sum them, and place the value in the cell that corresponds to Jan 1 on Worksheet2. I've primarily tried using the VLOOKUP function, but can't seem to make it work.
I would like to get the sum of a range in VBA and tried the following that did not work:
S= Sum(Range(Cells(1, 1), Cells(1, 6)))
000108159900
0.97
000108160000
1.82
000108160000
0.38
000108160000
0.37
There is one value for 000108159900, which is 0.97 and three values for 000108160000. This is just a very small sample. I have about 12 million such rows. What I'm trying to do is create a separate column that will say 000108159900 has a total value of 0.97 and 000108160000 has a total value of 2.57. How can I do that?
I've got a spreadsheet with bird species, dates (just day-month) and numbers (how many individuals). It looks a bit like this (well....the real sheet is a lot bigger). Note that some dates appear multiple times, because I counted for many years.
1
A
B
C
D
E
[Code]....
What I want is an overview, to be able to check which birds I've seen on which days of which months (the year doesn't matter) and in which numbers. It's supposed to look like this.
1
A
B
C
D
E
F
[Code]....
It should look for duplicates in row 2, and sum up all the values within these duplicated columns into the first one... It should also remove the columns from which it has summed up the values, except for the first one.
