I'm a basic excel user really and cannot find a function that will allow me to complete the following:
CELL A1 includes the following sequence of numbers: 1,2,1,0,2,3
I would like to know how to put a formula/function into CELL B1 that sums up the sequence of numbers in CELL A1 (i.e 1+2+1+0+2+3)
I am attemping to transpose a column of data into a single cell. I have a list of contact information, and one of the columns is for e-mail addresses. There are filters to the right of the data with different categories so the contact information can be filtered according to the different criteria. Ultimately, the people using the spreadsheet want to use those filters to create a list of e-mail addresses to send their distributions to.
The people who are using this don't have Outlook so we can't use an output to add them to the Outlook address book. We would like to make one cell at the bottom of all the data which would include all the e-mail addresses from that column seperated with a semi colon so they can just copy the contents of that cell and paste that into the To: field on their e-mail program. I've tried several different things but I've not been able to find a solution.
I found code on this site after searching a long time that has worked well in a larger macro I'm writing for use in Excel 2003 usage. However, I'm stumped on how to achieve the following on the attached sample: find and remove the number in A2 from the list in E2 then count the individual numbers seperated by commas in E2 and post the results in G2 Repeat the same sequence for C2, D2 and F2
View 8 Replies View RelatedI basically need to grab all the numbers going down in a row and get them into one cell in Text format with a comma between them.
A1
5293
5294
5295
5296
5299
5300
5301
5302
5303
5304
5305
B1
What I need in Text format
5293,5294,5295……
I think this is a really easy question but I can't seem to think of an easy answer. I have 300 cells in one column I want to have combined into one cell, seperated by commas. I know I could just =A1&","&A2&","&... but this is not what I want to spend my afternoon doing. Is there a better way of doing this?
View 3 Replies View RelatedIs it possible to find text listed in a cell, that has sereral options seperated by commas?
Example:
red, green, blue, orange, purple, black (all listed in one cell)
black is or is not found in targeted cell?
I need to have an input box, although I need to have multiple entries within the box seperated by a comma, and then the filter displays only the entries entered in from the input box.
If I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
I need to count the number of values entered into a single cell seperated by commas for record keepin purposes. I would prefer not to use a macro since I am not an expert, but will if i must. Here is an example of what i am talking about:
User A will enter "109,108,107,106" into a cell in Column A
At the bottom of column A the Total will read 4.
Now User B enters "110,111,112,113" into the next cell in Column A
At the bottom of column A the Total will read 8.
How to have a validation list (drop-down) from a single-cell in which values are separated by a comma.
Example I have.
I have a wine list which have many categories of which
COL A / COL B / COL C
Wine Name / Wine Producer / Vintage
I wrote a VBA code to look-up duplicates names and give the producers that make them. The names of the producers will be in an invis cell as Comma Separated Values.
For example: Wine 11 is made by producer X and Wine 11 is made by producer Y. I will have X,Y in a cell which need to be in a drop-down menu when Wine 11 is selected.
I got everything done. The only issue is to get the list. The problem is that the drop-down list shows X,Y as a single component and not as 2 drop-down components. If i were to write down X,Y in the validation list tab, it will show it as 2 components but referring to the cell doesn't.
I have a cell witch contains CSV I need too look up all the values off a master list an out put the vlookup results in 1 cell
Example:
( SHEET 1/Cell A1)
10,11,12
(SHEET 2/ look up list)
.A .B
110101
211102
312103
413104
514105
(SHEET 1)
I need the output to show the following in Cell B1
101,102,103
I want to split the contents of a single cell(ALT Enter as delimiter) into multiple cells and retain the values in column B.
Ex:
A1: apple
banana
car
house
A2: yellow
B2: building
x
y
B3: O
Output:
sheet 2:
A1: apple B1: yellow
A2: banana B2: yellow
A3: car B3: yellow
A4: house B4: yellow
A5: building B5: O
A6: x B6: O
A7 B7: O
I have a string of text in one cell on Sheet 1 (ie., A1, Sheet 1), here is a excerpt:
A-dec International Inc., A. Bellotti, A. DEPPELER S.A., etc ...
What I need to do is split the cell into separate rows, using the comma as a delimiter. I will be reading the cell from another sheet and need a formula that will provide me with
A1: A-dec International Inc.
A2: A. Bellotti
A3: A. DEPPELER S.A.
I want to put in each cell a Punctation mark (comma), like this: ,
... when I have in each cell a number
I don't know how;
I would like to place in sequence increasing the numbers of one I creak in a cell.
In the formula I determine it I creak and the corresponding frame number to the placed ones.
The problem is that he is accumulated only the greater and not sequencia it.
1803456781101112
1134567810111280
but,80-80
Function ordenar2(Myrange As Range, num As Integer) As String
Dim Myorder As Double
Dim X2 As String
Dim n As Integer
n = 1
Do While n
How can i merge all the columns from Column D to Column Y in Column Z. The seperator between the Columncontents should be numbers in format "<<1>>" for column D, "<<2>>" for column E,"<<2>>" for column F........
i have a wordlist(arabic from right to left lanuage) containing words and meanings. Column A contains Words, Colulmn B contains Transcription, Column C contains Grammer information and the following Columns up to Column Y contain of Meanings.
!!!The meanings start with Column D which is then followed by E,F,G... Y. If any column cell is empty then it would mean, that the following cells of corresponding columns are also empty. For example if Colulmn D has content but Column E not, then it means that F,G,H...Y are also empty!
When the entry in a cell is of the format e.g 3,4 is there any way to find the value 3 or 4 in that cell?
Attempts like:
Cells(i, 1).Value = variable (e.g variable=3)
or
Set cell_found = Cells.Range("A1:A10").Find(variable, lookat:=xlWhole)
do not find the cell with the 3 (or 4). The above work fine when 3 or 4 are alone in the cell. Is there anyway to find these values in the cell?
Is there a way to create a drop down list from a comma delimited list in a single cell? For example, col A is Name & Col B is the delimited list - Blue,Red,Green (list can be different for each name). Would like a drop down list in col C that allows you to pick one of the values from Col B.
View 3 Replies View Relatedi am looking some formula to make sequence number with criteria;
1) if in cell B2 contains only single/one data ----the result is mark "-"
2) if in cell B2 contains several data (not single)----the result is auto numbering with adding mark "." (dot) and start from 1.,2.,3.,4,etc........
for the detail,
condition 1 (multiple data in col.B)
number
name
1.
john
2.
mike
3.
sisca
etc...
condition 2 (single data in col.B)
number
name
I am not sure my title is accurate so I will explain what I am trying to do. I would like to total the numbers from each row which has "Monthly Totals" in column A. There are currently only two of these but there will be more added over the year. Rather then have to edit the formula to include the new cell I want added to the total, is there a way to create a formula which will automatically scan Column A for "Monthly Total" then add the cell from that row to the running total at the top? Basically, If any cell in Column A has "Monthly Total" add the cell from column B (from the same row) to the running total in cell B1. This way I could add as many "Monthly Totals" as needed and I wouldn't have to edit the formula in cell B1.
View 7 Replies View RelatedWhat is the function to add numbers in a single cell to show only a single number. I know it can be done but do not know the quick function to do it.
View 10 Replies View RelatedI have a string of numbers like this:
378 398 308 978 397 328 078 307 908 278
And this code works fine except for I get a Type 13 Mismatch error on this line of code:
Code:
x = Application.Transpose(Split(my_cell.Value, " "))
Here is the entire sub:
Code:
Public Sub split_down()
Dim x As Variant
Dim my_range As Range
[Code]....
How can I adjust this for several lines of numbers like this?
378 398 308 978 397 328 078 307 908 278
390 327 928 678 392 907 208 320 927 178
608 394 207 578 391 920 108 607 395 324
508 321 168 107 325 924 568 507 341 921
167 345 925 518 567 351 941 160 945 517
560 951 241 245 510 251 516 451 388 338
788 988 337 088 778 339 377 288 330 998
And what is going on with this error. The first number string above should be placed in cell A1 when trying this code.
I'm trying to automate a sequence.
I was gonna explain it but I couldn't make myself clear so I took a screenshot:
sequence.PNG
folder_type is what the user types, (for example, the letter "A"), and folder_code is a sequence that should auto-generate according to what was manually inserted in the folder_type field.
What formula could I use for this process?
I have a task to identify all the numbers in sequence in a worksheet, how do I do that?
Ex:
Column A
1
2
3
4
5
7
9
10
11
12
13
14
15
16
20
21
22
Desired output 1-5,7,9,10-16,20-22.
I have cells O1 to O300 numbers in random sequences of no more than 10
I need to average the 5 highest numbers in each sequence eg:
O P
1 2 16 (result)
2 20
3 4
4 6
5 14
6 12
7 8
8 10
9 16
10 18
11 blank cell
12 15 9 (result)
13 3
14 6
15 12
16 9
17 blank cell
18 blank cell
19 4 23 (result)
20 16
21 20
22 40
23 8
24 11
25 28
26 blank cell
down to 300 rows, the sequence of numbers can be from 1 to 10 but never
more than 10
I got a function : =IF(COUNT(O1:O10>=10,AVERAGE(LARGE(O1:O10,{1,2,3,4,5})),"
") but that works only for 10 numbers and not for less
There are 350 numbers in a column, 7 digits in each cell. I want to see which cells have 3 or more consecutive numbers. Only looking at the last 3 digits. Example. 1960657. 1960658. 1960659. 1960660. Has 4 consecutive numbers.
Conditional formatting ? or other?
I am trying to "auto fill" a column with numbers in sequential order. (1,2,3,4,5...) I typed in 1,2,3... in the first cells and clicked on the black corner dot to drag the sequence down. It keeps putting in 1,2,3,1,2,3,1,2,3..... I have also went into the advanced options and clicked the "enable fill handle and cell drag-and-drop" and also Alert before overwriting cells" and it still fills in 1,2,3,1,2,3....
View 9 Replies View RelatedI have a list of random numbers in column A the number range is from 0 to 20,000. What I am trying to do is to count the sequential numbers after each random number....sorry this is not really explained well so I willl use a numeric example.
A
23
24
25
33
34
60
77
80
Above is what I have in column A you can see that my number range starts a 23 so I would like to count the sequential numbers that occur from 23 in this case it would be count(23,24,25) giving the answer 3 I would like this answer to be inserted into column B next to 23 and the numbers that were counted in this formula then be deleted as rows (i.e. where the number 24 and 25 was counted then the rows containing these numbers are deleted), The macro moves then to count the next number.
In the case of just a single number then a value of 1 is entered into the column next to the number indicating that there was only one number in that sequence.
I have problem with function, I have array with random numbers in cell G1 and columns with X in some of the cells, now I want to check the cells with numbers from cell G1 in column F to see is there X or not if yes count if not do nothing. In attached example result should be 3.
View 7 Replies View RelatedI am trying to write a macro that will select and copy all cells in a row that do not have a zero value.
The data I am trying to select will be contained in 12 cells in a single row, i.e cells A1:L1 and all zero values will always be on the right hand side of the first non-zero value in this row (going left to right), for example:
Row: A B C D E F G H I J K L
(1) 0 0 0 0 1 1 2 2 2 2 2 2
What I want to do here is to select and copy cells E1 to L1, since they are the cells with non-zero values. This can vary, so here there are 8 cells with non-zero values but the next time there might be only 5 cell or all 12 cells, etc. I have a lot of data to sort like this so doing this manually takes a lot of time.
Once the macro has selected and copied the right cells, I will manually paste the data where I need to put it.
The big problem I am having is knowing how to firstly select the appropiate cells.