Syntax Error Using Evaluate In VBA
Jul 28, 2013
If I copy "mysum" contents to a cell and replace "lista" with a defined list, it works just fine. But whenever I run this code, it gives me syntax error.
Sub aaa()Dim i As Integer, myvar As Variant, tester As VariantDim mysum As Variant, lista As Variant,
alpha As Datelista = Sheet2.[D6].ValueWith Worksheets(Range("A10").Value) Do
i = i + 1mysum = Evaluate("SUMPRODUCT(((ISNUMBER(MATCH($B$8:$B$10007," & lista & ",0)))
*($A$8:$A$10007>(TODAY()-180))*(($E$8:$E$10007)+($F$8:$F$10007)+($G$8:$G$10007)+($I$8:$I$10007)+($K$8:$K$10007)))))
myvar = Evaluate("=TIME(10,0,0)>" & mysum) Loop Until myvarEnd Withtester = 35 - Sheet2.[c10]
alpha = mysumMsgBox "VALID for [" & lista & "] after " & i & " Day(s).
hours in last 180 days after " & i & " Day(s) will be (" & alpha & ")"End Sub
View 3 Replies
ADVERTISEMENT
May 3, 2006
I'm getting the error for the following piece of code.
Sub itconfandscratch()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "sturecord"
Database_Name = "Scratch" ' Enter your database name here
SQLStr = "SELECT stuname FROM dbo.sturec" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ""..............
View 2 Replies
View Related
May 17, 2014
VB:
Selection.FormulaArray = _
"=IF(RC[-7]=""Weekly"",RC[-1],IF((ParentCode=RC[-10])*(ClassType=""Active""),IF((EndDate=EOMONTH(EndDate,0))*(RC[-7]
={""Monthly"",""Quarterly""}),RC[-1],0),IF(RC[-7]=""Daily"",IF(SUMPRODUCT(((ParentCode=RC[-10])*(FundType=""C"")*
(ClassType=""Inactive Class"")*(TermDate<>"""")*(TermDate>=StartDate)*(TermDate<=EndDate))+((ParentCode=RC[-10])*
[Code] .....
I recorded macro for this formula its giving me syntax error i did " _" after the break but its still not working..
View 4 Replies
View Related
Feb 1, 2010
"Compile error - Syntax Error"
and the following line highlighted in yellow
"Sub CreateWorkbooks()"
It worked on Excel 2000 but not now and dont work either in Excel 2007.
Heres the complete code .....
View 9 Replies
View Related
Jan 28, 2009
Getting a syntax error which and I'm not sure what I've done wrong. This is the bit thats causing the problem:
View 2 Replies
View Related
Aug 27, 2009
what is wrong with this syntax:
View 2 Replies
View Related
Aug 16, 2007
When running a Macro I am getting an error message as follows:
Run-time error '1004':SQL Syntax error
The line of code which appears to be effected is:
.refresh Backgroundquery:=False
I dont really know what this part of the code is trying to do and why it is highlighted yellow when I try and run the code. I am basically importing data from Access to Excel and this line is the last line of the code. If I remove this line, the error does not occur and the code completes. However, the data from Access is not imported so I am assuming it is an important part of the code!
View 9 Replies
View Related
May 17, 2013
I am having some issues with my macro. I keep getting a syntax error? I am trying to combine these coding combinations together. Code G0398 with 95800, code G0398 with 95801 so on so fourth..
G0398
95800
G0399
95801
G0400
95805
[Code] ...........
View 2 Replies
View Related
Sep 15, 2009
I need to insert rows in row A44 depending how many cells exits in a range i named "ALL_C"
I saw this code that inserts 10 rows on A44 so i thought by modifying it the way i did would work but it didn't. I'm still new at this stuff. What am i doing wrong?
Original
Sub Insertinrow43()
Range("A44").Resize(10, 1).EntireRow.Insert
End Sub
Modified (doesn't work)
Sub Insertinrow43()
Range("A44").Resize(Count(All_C), 1).EntireRow.Insert
End Sub
Thank you!
View 9 Replies
View Related
Dec 3, 2009
I'm trying to write a macro that will insert a excel formula into a specific cell. When I try to run the macro I receive a compile/ syntax error. I don't understand why as the formula works in excel. Here is the code (formula only)
View 4 Replies
View Related
Sep 30, 2011
One of the formulas list whether or not an item is available or not. But when I try create a similar formula to indicate whether the item should be displayed or not I only end up with it being always displayed.
Code:
Option Explicit
Sub Reformat()
Dim wks As Worksheet
Dim iRow As Long
For Each wks In ActiveWorkbook.Worksheets
[Code] .......
what would be the correct format?
View 5 Replies
View Related
Feb 15, 2013
I know you can use the syntax range(cells(x,y),cells(z,w)) but for some reason unknown to be the following isn't working:
Set CurrSuppRange = TT.Range(Cells(1, CurrSuppCol), Cells(LastRow, CurrSuppCol))
where
CurrSuppCol = cboxCurrSupp.ListIndex
OurSuppCol = cboxOurSupp.ListIndex
LastRow = Workbooks(lbWkBkName.Caption).Worksheets(cboxWorksheet.Value).Cells(Rows.Count, "A").End(xlUp).Row
(each return integer values)
Set TT = Workbooks(lbWkBkName.Caption).Worksheets(cboxWorksheet.Value)
(tested and works fine)
View 2 Replies
View Related
Jan 7, 2014
I was able to get VBA to post this relative reference, which sticks the formula
=DATE(YEAR($D2),MONTH($D2)+6, DAY($D2)+1) into a cell in Col J.
All fine and dandy, works as it should with this formula.
Code:
.Cells(Row, "J").FormulaR1C1 = "=DATE(YEAR(RC4),MONTH(RC4)+6, DAY(RC4)+1)"
However, when I try this with a different formula =IF(ISNUMBER(SEARCH(C2,H2)),"REPEAT","SAFE"), I'm getting a compile error: Expected end of statement with this code:
Code:
.Cells(Row, "I").FormulaR1C1 = "=IF(ISNUMBER(SEARCH(RC3,RC8)),"REPEAT","SAFE")"
The error message highlights the word REPEAT. I suppose it's something with all the quotes throwing off where compiler thinks the end of the formula should be.
View 3 Replies
View Related
Apr 4, 2014
I get syntax error on return statement. I am using Excel 2010.
View 2 Replies
View Related
Aug 31, 2007
This line fails, is Method Range Global error.... What is wrong w/ this, and how should it read?
If Range("D", i).Value = "Need Parent" Then
2nd Question- The following line is my normal method in doing a simple For Next Loop. What is the difference between using this one, looping through the cells and the first one referring to a Range for the loop?
If Cells(i, "D").Value = "Need Parent" Then
View 9 Replies
View Related
Jul 19, 2006
I´m writting a macro. It works find until a certain point. When I want to change some outputs of the macro without changing the syntax, it display an error mesage while runing the macro. It says Else without If. Which is quite disturbing because the Else was not creating any problem before. Here is my macro before I changed the conditions (this one work nicely)
Sub Copy_Sheet_Beta()
Set wba = ActiveWorkbook
On Error Resume Next
If IsWorkbookOpened("Projekt.xls", "C:Documents and SettingsfrederikSkrivebordRedd Barna") Then
Workbooks("Projekt.xls").Activate 'In case open, just activate "Projekt"
Else
Workbooks.Open Filename:="C:Documents and SettingsfrederikSkrivebordRedd Barnaprojekt.xls"
End If
Set wb = Workbooks("Projekt.xls")
wb.Activate
If Not SheetExists(wba.ActiveSheet. Range("C1").Value) Then
MsgBox "overall doesn't exist!"
Else........................................
View 2 Replies
View Related
Mar 2, 2007
Is it possible, when user types for example "1+1" in cell A1, to calculate this sum in cell A2?
So I would have "1+1" in A1 and "2" in A2.
View 9 Replies
View Related
Nov 27, 2008
I cant figure out why this "evaluate" function is not working as I expected. I have number/text from $A$1 to $A$5 to try and learn how to use this function but have not had any luck. I need to learn how to use it properly so I can use a for loop to change multiple check boxes on a user form that I am trying to make.
View 8 Replies
View Related
Dec 16, 2006
I need a way for tell Excel to NOT evaluate a formula. Basically, I want Excel to leave the value being displayed in the cell alone. The formula in the cell is a function that I have implemented in C++ and registered with Excel through the Register call.
View 9 Replies
View Related
Jan 26, 2007
I cannot figure it out for the life of me. When I type a formula into a cell it will not evaluate, instead it just displays the text of the formula.
When I go to evaluate the cell -- Tools | Formula Auditing | Evaluate Formula
It tells me that "the cell currently being evaluated contains a constant."
What do I need to change so that cells will evalute formulas I put into the?
View 9 Replies
View Related
Jul 3, 2008
Need the syntax for using a checkbox in a col. ?
If checkbox checked >> Syntax ??
If un-checked >. Syntax ??
Does it simply evaluate to val. of cell to either 'Y' or 'N' ?
View 9 Replies
View Related
Oct 8, 2008
I want to do it evaluate each row and if the last value for that row is X, then highlight that cell and the Server name for that row.
I have used conditional formatting but it seems that I cannot specify an option to look at the last cell in a row, evaluate that cell's value and then apply the formatting. I can only have conditional formatting highlight every cell in that row that matches the condition.
I only want the last cell, which represents the most current data, to be highlighted, as well as the category name, if the condition is met.
View 7 Replies
View Related
Oct 29, 2009
I have two sets of information, on one hand I have telephone numbers and in the other set I have prefixes and countries. My goal is to tell to which country each number belongs:
i.e.
Numbers Prefix Country
4476324125 44 UK
3354326544 33 France
9713425432 971 UAE
9143253245 91 India
1343543253 1 USA
4432412412
4924241214
7431242424
So I would need to add a column next to "Numbers" saying to which country each number belongs.
My list has a few thousand numbers and a couple of hundred prefixes.
I tried with some array formula, but cannot make it work.
View 11 Replies
View Related
Nov 17, 2009
Example numbers:
21130 & 21065
I want to check each number if EITHER of the two conditions is true:
1. if the third digit from the right (the hundreth place) is greater than zero;
or
2. if the second digit from the right (the tens place) is >=6.
If either is true I want to add a particular number to the original number.
My example numbers meet questions 1 & 2, respectively.
View 11 Replies
View Related
Jul 2, 2014
I have to run an Evaluate function which is linked to an Array formula, but when I try just to put =ev(), the Array Formula which is located in another cell, does not run properly.
View 3 Replies
View Related
Feb 11, 2010
How can I evaluate just the first part of these stirings so I can just do something like Left("Ca",2)?
View 2 Replies
View Related
Jul 9, 2008
Im looking for a formula that will look at the the products in column A and see if their coresponding value in in Column I is equal to "website"
I would like it to count how many website sales the product has and return the product name in order of number of website sales into the top ten list at the bottom.
I have attached a test file which should clear things up
View 9 Replies
View Related
Mar 11, 2013
I have a problem in getting VLOOKUP to evaluate consistently. It is best understood from the screenshot linked (Office 2010), where cells B3 and B4 are not showing the expected values. I wanted to upload the excel file, but cannot see the option to do it.
The screenshot is at Book2 | Flickr - Photo Sharing!
This is just a small segment of the big excel sheet.
View 6 Replies
View Related
Jan 22, 2009
Ok, this should be an easy one. I have a formula that one of the functions needs to check if certain cells are blank.
For example; I want to check if A2, B2 and C2 are blank.
Currently, the only thing that seems to work is,=IF(OR(ISBLANNK(A2),ISBLANK(B2),ISBLANK(C2)),"PASS","FAIL")
This is just a piece part of the entire formula and I have to evaluate the data based on multiple criteria. The ISBLANK() portion has to be able to evaluate at least 15 cells. Is there a way to evaluate the cells all at once instead of typing out ISBLANK() over and over. I have tried everything I can think of in regards to syntax.
View 9 Replies
View Related
Feb 5, 2009
I cant see the wood for the trees! I have this formulae which works just how I want
ACO2 = Evaluate("= SumProduct((K2:K3=""Closed"") * (EG2:EG3=""06-15 Days""))")
However when I change this to a dynamic range I keep getting a syntax error. Can anyone see where I have gone wrong? I know its probably only a " or an ) out of place but its driving me mad!!!
ACO2 = Evaluate("=SumProduct(((Range("K2:K" & Lrow)=""Closed"") * ((Range("EG2:EG" & Lrow)=""60 Days+""))")
AC02 is an integer, as is Lrow (its a simple loop which works out how many rows there are).
View 3 Replies
View Related