Test If Named Range Exists

Sep 7, 2007

Is there a way to check if a named range exists before I run a piece of code? I created a new file that has need for all the old file's ranges plus a couple more, and I want to use the same macro for both. So on the first file I just want to say, if these other named ranges are there, go ahead and do his other thing.

View 6 Replies


ADVERTISEMENT

Excel 2010 :: VBA To Test If Named Range Exists On Active Sheet?

Aug 14, 2012

How can I test in my VBA wether a named range (with a scope of sheet) exists on the active sheet?

Code:

If "EmployeeEmail" exists on the active sheet Then,

xxxx
Else
yyyy
End If

Using Excel 2010.

View 7 Replies View Related

Test Whether Or Not A Named SeriesCollection Exists?

Apr 20, 2014

How to see if a SeriesCollection that has been named exists so when the corresponding toggle button it clicked it turns on or off the correct corresponding dataseries.

When I create a series I use something like:

[Code] ............

Where the range "tblJim[Quizes]" contains the quiz scores which are the data series pointes and "=Data!$C$6:$C$35" has the respective dates.

When that toggle button is clicked I need to test if the SeriesCollection "Jim" exists so if it does I can delete it and if not, create it.

Also, as much as I hate to multi-subject but usually do anyway, I am wondering if there is good example of doing the same ends by a different strategy - a chart with everyone on it and by applying data filters to the dataset I would turn on and off people's data.

View 2 Replies View Related

Find If Named Range Exists In Sheet Using VBA

Nov 17, 2011

How can i find if a named range exists in a sheet using VBA?

E.g.: I have a named range called test that houses 4 numbers in four cells. Using

Code:
Dim rtest As Range
Set rtest = Worksheets("sheet1").Range("test")
.
.
.
.
rFoundCell = _
Cells.Find(What:=rtest, After:=Range("a1"), LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:= _
xlByRows, SearchDirection:=xlNext, MatchCase:=False)

Won't work. Run - time error 91 occurs.

View 9 Replies View Related

Check If Named Range Exists Before Delete

Nov 29, 2007

I'm trying to check if a named range "ActiveCells" exists before deleting it in VBA but can't seem to get the syntax right, I have tried: If Range("Activecells") Is Nothing Then Resume Next Else: ActiveWorkbook.Names("ActiveCells").Delete

AND

If ActiveWorkbook.Names("Activecells") Is Nothing Then Resume Next Else: ActiveWorkbook.Names("ActiveCells").Delete

Can anyone point me in the right direction? I have tried searching but I can only find threads about checking for named objects or about using the toolbars to add/delete named ranges.

View 2 Replies View Related

Test If List Exists

Nov 16, 2009

is there a way to test if a list exists on a sheet? I'd like to do something like this:

View 2 Replies View Related

Test If Sheet Exists ..

May 14, 2007

After going though the archives, I could not find how to test for an entry that does not have a sheet to be pasted into. I have a series of worksheets with the month-year for tab labels. The format for these tab labels is ("mmm-yy"). My code will place the new entry into the first available row of the sheet with the same month-year as the entry. I can enter any item with any date in any order and as long as there is a sheet with the same month-year, the entry will be placed into the correct sheet. Temporarily, when I need to add a new month, I click on a CommandButton that uses this code (located in a general module) to make the new sheet:

Public Sub AddNextSheet() ...

View 5 Replies View Related

Test Whether Or Not An External File Exists?

Sep 15, 2009

Is there a way to test (from Excel 2002) whether a specified file (not necessarily an Excel file) exists on my computer? I could specify the complete path.

View 4 Replies View Related

Test If Sheet Exists Syntax

Nov 12, 2009

I want to check if a worksheet exist, and if it does I want to skip the part of a macro that creates it, else I want to create it.

Here's what I have so far:

View 2 Replies View Related

Sheet Exists Test Not Working

Feb 16, 2010

Got most of this code from the web and I can't get it to work. The part I added was the array and loop bit. As a test I specifically renamed one of the sheets in the file to be something NOT in the array, but it still goes through like it exists (I.e. shexist=True). What did I miss?

Dim wsname As String, shexist As Boolean
myarray = Array("Statement of Values", "Vehicle", "Driver Info.", "Revenues by Discipline", "Revenues Geographically", "Employee-Payroll Info. CDN & US", "U.S. Payroll", "Employee-Payroll Info. FOREIGN")
For i = 0 To WorksheetFunction.CountA(myarray) - 1
shexist = False
On Error Resume Next
wsname = myarray(i)
shexist = CBool(Len(ActiveWorkbook.Sheets.Item(wsname).Name))
On Error GoTo 0
If shexist = False Then
MsgBox "The worksheet '" & wsname & "' does not exist in this file or has been renamed." & _
vbCr & "Please check the file and try again.", vbExclamation, "Consolidate"
GoTo THEEND
End If
Next i

View 9 Replies View Related

Test/Check If Shape Exists On Worksheet

Aug 31, 2006

I'm creating a macro to select, modify dimensions and place shapes on a excel sheet. (I'm talking about pictures insered and stocked in a specific sheet of my workbook)
When the users insert a new picture he has to set a name for each of them.
A combobox contain the choices, when an item is selected, the macro identify, size and place the corresponding picture.

But I have a bug if a shape doesn't exist when I try to select it :

Sheets("fiche de controle").Select
'select the sheet with the pictures
ActiveSheet.Shapes(Item_old).Select
'select the shapes "Item_Old"
Item_Old is a variable corresponding to the picture name.

If the user made a typo, I have a bug.
Someone knows how to test if the shapes exist to display a meesage if not ?
Or somethig to avoid this kind of bug ?

View 6 Replies View Related

Determining If Cell Is Part Of Named Range And What That Named Range Is?

Aug 16, 2014

Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:

Code] .....

here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.

View 5 Replies View Related

Named Ranges On Multiple Sheets With The Same Named Range & I Cant Figure Out How To Do This

Jun 2, 2006

I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...

View 2 Replies View Related

Making Named Range The Last Active Value Used Within Another Named Range?

Jul 19, 2013

I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.

Picture2.jpg

Using the following code when updating just one criteria with several charts

VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)

If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....

which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.

View 2 Replies View Related

Test Two Cells And Set A Third Cell With Different Values Depending On Test Results

Aug 21, 2013

I am trying to determine Long Term Gain (LTG,) Long Term Loss (LTL,) Short Term Gain (STG,) Short term Loss (STL,) or No Loss nor Gain (NGL)testing two cells (A1 and B1)and setting a third cell (C1) to the text LTG, LTL, STG, STL, or NGL depending on the results of testing cells A1 and B1.

A1 represent a number of years and B1 represent gains or losses (negative)in dolars.

The way I see the logic is as follows:

If cell A1 or cell B1 are either one of them equal to 0, then it is neither a Gain nor a Loss (NGL.)

If cell A1 is greater than or equal to 1, then it is Long Term; else, if A1 is greater than 0 and less than 1, then it is Short Term.

On the other hand, if cell B1 is greater than 0, then it is a Gain; if B1 is less than 0 (a negative number,) then, it is a Loss.

I need to find (if it is posible in Excel) one formula to test the two cells for posible outcomes:

If A1 = 0 then C1 = NGL
If B1 = 0 then C1 = NGL
If A1 >= 1 and B1 > 0 the C1 = LTG.
If A1 >= 1 and B1 < 0 the C1 = LTL.
If A1 < 1 and B1 > 0 then C1 = STG
If A1 < 1 and B1 < 0 then C1 = STL

View 3 Replies View Related

Countif- Use A Named Criteria As Well As A Named Range

Oct 25, 2009

if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,

View 9 Replies View Related

Combine Two Named Ranges Into 3rd Named Range

Mar 14, 2013

Merge two columns into one list in excel

I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).

Here's the formula from the example:

Code:

=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))

I've played around with it, but could not come with any that worked.

View 3 Replies View Related

Test For Optional Range

Aug 25, 2009

I need to test whether an optional Range has been passed to a UDF. IsMissing(RangeName) always returns False regardless of a range being given or not. RangeName exists as an Object that shows a Value of Nothing and Type of Range. I have not found any test that will indicate if the Range was passed in or not.

View 4 Replies View Related

Test If Range Variable Set

Apr 8, 2008

I'm trying to test whether a variable, a range in this case, has already been defined. If not I want to Set it to a specific cell.

I tried:

If rng Is Nothing Then
Set rng = Range("B14")
Else
rng = rng
End If

View 9 Replies View Related

Value Test Of A Range Of Cell And If Statement?

Feb 17, 2012

I am trying to build a macro that test for the value of each cell of a range (in a column), and if found, then the value of the cell of the same row (another column) will be set to 1. If not, then the macro writes a formula to get some data from BBG (this part is ok). this is what I have done so far but I have an error message, telling me "Not Else with out if" .

Code:
Sub Fx()
With Worksheets("DivRelease")
Dim LastLig As Long

[Code].....

View 9 Replies View Related

Test For Existence Of Text In Range

Mar 10, 2009

I d like to test for the existence of text in range D5 to D10000 for example

I may have this 49000897890VGN21SP. VGN21SP is text so I d like to spot it

it may also exist on its own VGN21SP can you suggest me with a macro?

like this one

Sub DeleteNAs()
Dim C As Range
For Each C In ActiveCell.CurrentRegion

If C.Text = "#N/A" Then C.ClearContents

Next C
End Sub

View 9 Replies View Related

Look If Value Exists In Range

Sep 10, 2009

I have a form, when I fill in the order no, I want it to look if the value exists in a range and then notify me with a msgbox. Here is my code - it doesn't work no matter what I insert into the textbox it tells me that it exist.

View 11 Replies View Related

If Range Contains: Range = Fail Then "test Fail", Else "test Pass"

Feb 12, 2009

I have a range of data that contains can contain either a pass or fail. what I require at the bottom of this range is a formula that says 'if any one of the range = fail then "test fail", else "test pass"'

View 2 Replies View Related

Creating Dynamic Range Based On Test?

Feb 14, 2013

I need to do stats for each month within a set of data. Ie take the min for all data in the month of Jan only and repeat for all other months etc. Is there some way I can set up a Min function to only consider the data belonging to jan for example and have it change and only consider Feb, then march.. etc Seems like it would be easy to just do this manually but there is a large timeframe over which data was collected so would take forever.

Have attached sample of data. rainfall.xlsx‎

View 4 Replies View Related

Generate Test Data From Range Of Values Using Vba?

Apr 15, 2014

I want to randomize a range of values stored in sheet 1 and insert them in another cell.

I am having values for sales consisting of product names and its price. there are 10 product names and its corresponding prices and is stored in cells E1:F10. I want to generate test data containing product names and its corresponding price. The generated data needs to be saved in the cells A1:B50

the product names needs to be randomized. This needs to be done in vba. Below is the screenshot of the final result that is needed. As you can see, I have randomized my 10 products and its prices into the test data column. This was done using vlookup formula and I need the same to be done in vba.

View 2 Replies View Related

If Value Exists In A Range Then Move To Next Row

Jun 18, 2014

Basically, if a cell value exists in a list on another worksheet then move to next row. If the cell value does NOT exist then look at columns J, K, L and M and see if a specific value exists in each. If any of these cells contain this criteria then copy the row and add it to the bottom of a growing list on another sheet. Here is what I have so far.

Sub OrdersHeld()

Application.ScreenUpdating = False

Dim x As Double
Dim ws As Worksheet
Dim numberofrows As Double

[Code] ......

View 11 Replies View Related

How To Check If Range Exists

Jan 13, 2009

Hi all, this might sound really easy but I have a Named Range in excel 2003.

Now I'd like to write a VBA code to check if this range exists before carrying on futher computations.

View 4 Replies View Related

How To Confirm Whether Particular Value Exists In Range

Jun 4, 2012

How I can confirm whether a particular value exists in a range. i.e.

ABCD11Yes/No22

Does the Number 4 exist in the range

A1:A8?334455667788

View 3 Replies View Related

If Then Statements: Construct A Logic Test Using The Range Of Cells

Aug 2, 2006

How do you write an If then statement using a range of cells? I want to construct a logic test using the range of cells A7:A19. I want the logic test to see if the any of the values =1. If the test is true then I want it to display the value in B7:19 (which ever cell corrulates to the cell in column A that has the value of 1) and display the number in the B column.

View 6 Replies View Related

Check If Cell Value Exists In A Range

May 14, 2012

If the data entered in Column "I" starting from row4, exists in range "X4:X12" then "Pend for audit" should appear in Column "R" of the corresponding row.

below is the coding Iam using.

Code:

Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim StateName As String
Dim CName As String
Set Cells_Changed = Target(1, 1)

[Code]...

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved