I d like to test for the existence of text in range D5 to D10000 for example
I may have this 49000897890VGN21SP. VGN21SP is text so I d like to spot it
it may also exist on its own VGN21SP can you suggest me with a macro?
like this one
Sub DeleteNAs()
Dim C As Range
For Each C In ActiveCell.CurrentRegion
If C.Text = "#N/A" Then C.ClearContents
Next C
End Sub
i have two column of dates A & B as shown below.Among these two columns i want to check the existence of a date range 21/08/2009 to 25/08/2009.I want to check where-2 this date range is existing in the given column ....
View 9 Replies View RelatedI need to perform a lookup with multiple criteria.
I am attaching a sample file.
Sheet 1 contains 3 columns
A - Report
B - Name
C - Date
Sheet 2 contains 2 columns
A - Name
B - Date (where results are to be placed)
Basically, I would like column B, Sheet 2 to be populated with the Date from Sheet 1, column c if . . . .
2 criteria
1) column A, sheet 2 matches column B, sheet 1 and
2) column A, sheet 1 = ABC
I keep getting a FALSE or #N/A results.
I am trying to determine Long Term Gain (LTG,) Long Term Loss (LTL,) Short Term Gain (STG,) Short term Loss (STL,) or No Loss nor Gain (NGL)testing two cells (A1 and B1)and setting a third cell (C1) to the text LTG, LTL, STG, STL, or NGL depending on the results of testing cells A1 and B1.
A1 represent a number of years and B1 represent gains or losses (negative)in dolars.
The way I see the logic is as follows:
If cell A1 or cell B1 are either one of them equal to 0, then it is neither a Gain nor a Loss (NGL.)
If cell A1 is greater than or equal to 1, then it is Long Term; else, if A1 is greater than 0 and less than 1, then it is Short Term.
On the other hand, if cell B1 is greater than 0, then it is a Gain; if B1 is less than 0 (a negative number,) then, it is a Loss.
I need to find (if it is posible in Excel) one formula to test the two cells for posible outcomes:
If A1 = 0 then C1 = NGL
If B1 = 0 then C1 = NGL
If A1 >= 1 and B1 > 0 the C1 = LTG.
If A1 >= 1 and B1 < 0 the C1 = LTL.
If A1 < 1 and B1 > 0 then C1 = STG
If A1 < 1 and B1 < 0 then C1 = STL
I need to test whether an optional Range has been passed to a UDF. IsMissing(RangeName) always returns False regardless of a range being given or not. RangeName exists as an Object that shows a Value of Nothing and Type of Range. I have not found any test that will indicate if the Range was passed in or not.
View 4 Replies View RelatedI'm trying to test whether a variable, a range in this case, has already been defined. If not I want to Set it to a specific cell.
I tried:
If rng Is Nothing Then
Set rng = Range("B14")
Else
rng = rng
End If
My logical test is =IF("D2"="E2",1,2). When I autofill or copy down, the row numbers do not change to "D3"="E3", etc. How do I delineate text and also have the ability for autofill or copy to change the rows as it goes?
View 2 Replies View RelatedI am trying to build a macro that test for the value of each cell of a range (in a column), and if found, then the value of the cell of the same row (another column) will be set to 1. If not, then the macro writes a formula to get some data from BBG (this part is ok). this is what I have done so far but I have an error message, telling me "Not Else with out if" .
Code:
Sub Fx()
With Worksheets("DivRelease")
Dim LastLig As Long
[Code].....
Is there a way to check if a named range exists before I run a piece of code? I created a new file that has need for all the old file's ranges plus a couple more, and I want to use the same macro for both. So on the first file I just want to say, if these other named ranges are there, go ahead and do his other thing.
View 6 Replies View RelatedI need a function that will use a column of text values and test these values
to see if one or more of the values exist in a single cell. If it does I need
the function to return true or false.
Ie. cell A1 contains the text "Jim Smith" the B column contains the test
names (column of test values ) ie. B1 is "bill" B2 is "fred" B3 is "jim".
Because Jim is in the cell A1 I would need the function in C1 to return the
value "true". If A1 contained the text "bob smith" then function in C1 would
return the value "false".
I have a macro that takes a value of one cell ("Cells(iFoundPass, 5")) and makes another cell (Admin_Level) equal it (the valules can be wither 'Administartor' or 'Standard'). When someone runs a macro it checks to see if "Admin_Level" equals "Administrator". The problem is that when that first macro runs, even if ("Cells(iFoundPass, 5")= "Administartor" and then "Admin_Level" will be made "Administrator" , my IF/THEN statements do not work. I think this is because the value of "Admin_Level"("Administrator" in the example above) is not text. I can't seem to figure out why. I do know, though, if I manually enter in 'Administrator' in the cell name "Admin_Level" then my IF/THEN works.
Sheets("Config").Range("Admin_Level") = Sheets("Config").Cells(iFoundPass, 5)
and then this is the logical check that runs anytime someone wants to run a macro...
If wb.Worksheets("Config").Range("Admin_Level") <> "Administrator" Then
PasswordForm.Show
End If
I have a range of data that contains can contain either a pass or fail. what I require at the bottom of this range is a formula that says 'if any one of the range = fail then "test fail", else "test pass"'
View 2 Replies View RelatedI need to do stats for each month within a set of data. Ie take the min for all data in the month of Jan only and repeat for all other months etc. Is there some way I can set up a Min function to only consider the data belonging to jan for example and have it change and only consider Feb, then march.. etc Seems like it would be easy to just do this manually but there is a large timeframe over which data was collected so would take forever.
Have attached sample of data. rainfall.xlsx
I want to randomize a range of values stored in sheet 1 and insert them in another cell.
I am having values for sales consisting of product names and its price. there are 10 product names and its corresponding prices and is stored in cells E1:F10. I want to generate test data containing product names and its corresponding price. The generated data needs to be saved in the cells A1:B50
the product names needs to be randomized. This needs to be done in vba. Below is the screenshot of the final result that is needed. As you can see, I have randomized my 10 products and its prices into the test data column. This was done using vlookup formula and I need the same to be done in vba.
How do you write an If then statement using a range of cells? I want to construct a logic test using the range of cells A7:A19. I want the logic test to see if the any of the values =1. If the test is true then I want it to display the value in B7:19 (which ever cell corrulates to the cell in column A that has the value of 1) and display the number in the B column.
View 6 Replies View Relatedif there's a way I can verify that a custom add-in is active? My company uses an add-in to allow end users to construct several types of API calls. My program depends on that add-in to be installed. I'd like to try to detect the add-in and halt the program if it's not there.
View 3 Replies View RelatedI have a macro tht deletes sheets from my workbook. How do I check if these sheets exist before deleteing them? Thus so that
Worksheets("MySheetName").Delete
Does not generate an error if "MySheetName" doesnt exist?
i am using VBA to handle a pivottable in excel. i am using pt.PivotFields("Position Status").Orientation = xlHidden to hide a field. but what if this field is not there in the first place? how should i put a "if" clause so that if this field is not there, i can skip this and go to next action?
View 2 Replies View RelatedI have a worksheet with a several pivot tables on it and this number can vary. I want to do, is check if a table with a given name exists, and if it doesn't create it, but if it does, to just .RefreshTable. I tried to use
View 2 Replies View RelatedOn Sheet1, Row 2 I have my columns named January-December, which correspond to the names of the other 12 sheets in my workbook. I want to test and sum the same range of cells in each sheet by simply coping and pasting the formula. I am using INDIRECT and SUMPRODUCT, but is there a better way? It seems to have caused the sheet to run slowly. Perhaps it's just the amount of data. Here is an example of the formulas I am using:
=SUMPRODUCT((INDIRECT("'"&B2&"'!$B$3:$B$200")=$A$2)*(INDIRECT("'"&B2&"'!$C$3:$C$200")="Yes")*(INDIRE CT("'"&B2&"'!$E$3:$E$200")))
This gives me the intended result. B2 in this case is January. C2 is February and so forth.
Using Excel 2013,
It trying to see if the Month() of a date is in a Array / Range
I tried =IF(MONTH(E8)={2,6,9,11},"Yes","No") where E8 = 9/30/12
How can I test in my VBA wether a named range (with a scope of sheet) exists on the active sheet?
Code:
If "EmployeeEmail" exists on the active sheet Then,
xxxx
Else
yyyy
End If
Using Excel 2010.
The workbook will consist of at least two pages:
1. A user input page
2. A records page
On the user input page, there will be two fields to enter information in... one for an exact address (ex: 600 n. nowhere) and one for a casual address (ex: On Nowhere street south of Anywhere Blvd). On the records page, I'm going to keep all the addresses and their corresponding casual addresses so that in the future, I don't have to keep inputting both.
What I'm looking to do is have a formula/function/vba code check the exact address against my records for it already existing -- and if so, pulls the corresponding casual address. For example, if last week I entered 600 n. nowhere and then transferred it into my records and then this week, I again entered 600 n. nowhere, the workbook would find the record and place the casual address for me.
I am trying to check for the existence of a record in an access table and do one of the following:
1. If the record exists, overwrite it in the table.
2. If the record doesn't exist, add it to the table.
I'm having real difficulty with the VBA code to check an Access table for the existence of a specific record, and then overwrite. I can do it with dates, but I'm looking for a unique record ID "300112_1_II" and it's trowing up a "Type mismatch" error.
For testing purposes, I'm using the following parameters:
Field = Field_1
Table = TBL_1
Record ID = Test_Record
Basically, I want to check Field_1 for the existence of Test_Record and then either edit the other fields in the record or add a new record, depending upon what it finds.
I use the code below to check and see if a sheet exists or not when a workbook is opened. If it does not, continue. If it does I need to run a different sub on it.
Twist, I need to check for a hidden sheet. How would I chg the code to do this?
Private Sub Workbook_Open()
'Also need to check the code in the userform. Has On.Time command.
'SplashForm.Show
Sub Sheet_Test_1()
Dim sh As Worksheet
On Error Resume Next
Set sh = ActiveWorkbook.Sheets(" total")
If Err.Number <> 0 Then
MsgBox "The sheet doesn't exist"
Err.Clear
On Error Goto 0
Else
MsgBox "The sheet exist"
End If
End Sub
I try to write the function that gets some "ref" and returns appropriate item.
For example: if I give to function "C3", it returns "AAA"
if I give to function "R18", it returns "BBB" (cause it between R15 to R26)
if I give to function "R9", it returns "BBB" also.
Check the attachment, i could not make out this using vlookup, how to overcome this problem.
test.xlsx
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
I am trying to Lookup a country to see if it is classified as a "Developed Country".
My formula would be in cell AA4. I want to see if the country in cell B4 is on a list of developed country's on another worksheet. IF the country is found on that list cell AA4 displays Developed. If the country is not on the list, cell AA4 displays Emerging.
I have tried an IF statement using the Match function and it does not work.
=IF(MATCH(B4,'Developed Country List'!$A$2:$A$37,0), "Developed", "Emerging")
I am trying to test for the next available row in a sheet using a range as follows:
NextRow = Range(MyRange).End(xlDown).Row + 1
If there are no rows being populated, the formula throws an error and I assign NextRow to 0 indicating no entries present
However, and this is my question, if there is one row populated the value for next row seems to either give 0 or 65637.
After this, the code runs OK.