Is it possible to have a code that says if I have a range of cells....say a1:d1 with d1 having a date in it....have that code say that if that date in d1 is greater than 30 days from today, make that whole range of cells (a1:d1) change color like to red.
View 9 RepliesIs it possible to use different text colours as part of the [Value_If_True] or [Value_If_False] when using an IF formula? For example =IF(AS3<34,"ok","not ok")
In the above formula I would like the “ok” value to be in Blue and the “not ok” value in Red.
I have a spreadsheet that will contain about 5-15 rows with a letter "S" in the column. If this letter S appears in the column, I need its entire row to change font color to RED and then change that row's value in column L to a negative number. is there any easy way to do this?
View 14 Replies View RelatedI have got a userform with lots of controls,
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
I have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.
i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?
How would I compare two text fields (old and new) and change the font in the 3rd column (Difference)?
For example:
Old: I can not figure 3 things out.
New: I can't figure 2 things out.
Difference: can not can't figure 3 2 things out.
I use the code below to automatically set a black dot in cell
A11. I would like to add code which would color that dot
the same color as a manually placed checkmark in column C11 which
is symbol é.
In other words, in addition to the code printed below, I would
like to color the dot the same color as the color of the arrow
symbol é in column C11.
Is that possible? Thanks
=IF(AND(B11="ü",D11="X"),CHAR(108)," ")
I was wondering if there's a way to make the numbers in a column over 50 (as an example) green and numbers less than 50 red. (The numbers in this column are the sums of other cells, but I guess that doesn't really matter.)
This way when there's a lot of things going on you can see what's what without filtering or rearranging.
Is there a way to Print VBA code in color, like how it appears on the screen?
View 1 Replies View RelatedIs there VBA color to change ".Fill.ForeColor.SchemeColor =" into NO FILL? In other words, keeping the existing Foreground color prior to the macro being activated.
I'm in a chart.
I have a code that updates data from one file to another.....esentially, i run this code daily and it updates to a compiled daily log of all of the previous days data.
Currently, i am manually coloring the cells to visually assist in grouping what data has been uploaded for each day.
Sub UpdatePOQntyReducDB()
Dim lookupfilename As String
part of my code looks like this. Instead of it being if c.interior.colorindex i want it to be if top border color = 4.
How do i syntax this?
For Each c In Worksheets("Sheet1").Range("B7:DE7").Cells
If c.Interior.ColorIndex = 4 Then Range("DH7").Value = Range("DH7").Value + c.Value
Also, is there a way to specify Range("DH") and make the row be the current row, not hard coded to 7
I am using the following code to change colors in set of autoshapes (Thanks Colin_L and Norie) and it works fine for the first autoshape but has it has no effect on the subsequent autoshapes. I plan on using the code for about 200 autoshapes, I thought I could just copy the first code and keep adding it on for each autoshape... I am guessing that the code is stopping after the first set and not continuing?
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$C$46" Then
'Change autoshape color to red depending upon cell value, or blank of no value is entered.
With ActiveSheet.Shapes("Rectangle 1").Fill.ForeColor
If Target.Value = "" Then
.SchemeColor = 1
ElseIf Target.Value >= 422 Then
.SchemeColor = 50
ElseIf Target.Value >= 1 Then
.SchemeColor = 10
Else
'it must be less than 1
End If
End With
End If......
I am looking to color code items in a list box called lbActiveItemList, is this possible? If so I would like it to color code based on the value in the 3rd column as follows:
If the value = 'Receive' Color code the item line as Black
If the value = 'Return' Color code the item line as Blue
If the value = 'Relocate' Color code the item line as Green
If the value = 'Lost' or 'Damaged' color code the item line as Red
Is there some code to change the fill color of all the combo boxes I have on a spreadsheet.
View 2 Replies View RelatedVBA code to do the following.
In F147 will go a value
Then if the value of F147 is greater than 20 the color of D144 would turn green.
I am trying to a macro that allows me to change the backgroud color and font color depending of the value of the cell.
For example is cell A1 is having the value between 1 to 3 the background color of the cell will the light turqoise, if the value is between 4 to 20 the cell background color will be green and so on.
I have based on certain posted example and adapt to my code but somehow it is not working.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Select Case Target.Value
Case Is = 1, 2, 3
Target.Interior.ColorIndex = 34
Case Is = 4, 5, 10, 20
Target.Interior.ColorIndex = 43
Case Is = 30, 40, 50
I would like to have a vba code that changes the cell color so that if there is number 1 (just number 1) in some cell the background of the cell changes in to shade of grey and cell that has number 2 changes into darker shade of grey and so on. I have numbers 1-10 in random order in my sheet. I mean there is many cells that has the same number and the sheet is quite large so vba code would be ideal choise to do it quickly.
View 9 Replies View RelatedI am wondering if there is any good way of coloring different sections of the source code in excel to show what different programmers have added?
I am trying to color code mistakes I find when running formulas in a macro. Right now I have it set up to color code mistakes red using the following code after the formula has been inserted in column E.
Range("E2:E75").Select
Selection.FormatConditions.Add Type:=xlCellValue, Operator:=xlEqual, _
Formula1:="=""Check"""
Selection.FormatConditions(1).Interior.ColorIndex = 3
My issue is, some of my checks have more than one variable as a wrong answer. For example, one check may include Check and Bad as possible outcomes of the formula in the cell.
the code required to allow two different variables to cause the cells to change color.
I tried a second set of the code for the same column and changed the formulas word to Bad but it did not highlight the cells that came out with Bad as the outcome of the formula.
I am trying to create a model that has a mixture of conditional formatting and data validation formulas within it, but have run into a problem in one area. Essentially, cell E10 is a Validation which pulls a drop down list of names. One of the options in this list is "Other".
I want to create a VBA code to make sure that cell E12 will get rid of any input, turn grey (color index = 15), and potentially lock (if possible!) if the "Other" is chosen by the user in cell E10. If any other value is chosen for cell E10, Cell E12 needs to remain unlocked and white (color index=2).
I have values that I want to color code in my table. Originally I was tagging them as numbers, but instead I need them as colors.
Function conversion(pVal As Double)
If pVal > 0.05 Then
conversion = "1"
ElseIf pVal > 0.001 Then
conversion = "2"
ElseIf pVal > 0.0001 Then
conversion = "3"
ElseIf pVal > 0.00001 Then
conversion = "4"
End If
End Function
Now I want instead of conversion = "1" etc to be
Function conversion(pVal As Double)
If pVal > 0.05 Then
(make white)
ElseIf pVal > 0.001 Then
(make brighter blue)
ElseIf pVal > 0.0001 Then
(make green)
ElseIf pVal > 0.00001 Then
(make navy blue)
End If
End Function
I want the text and cell the same color (number and cell so the number disappears so that I just have a colored cell but the value is still there if I want to look at it).
I must highlight cells that appear more than once.
What I mean is that if an item in a cell appears more than once I highlight it in blue, if the same happens twice I highlight that cell red etc and so one. does anyone know how to do this in excel.
I am trying to color code the cubes in my chart. I'd like to be able to be able to specify a specific color per cube. What code what I write for the Sheet to do this?
View 5 Replies View RelatedI searched through the files and found a macro that works for me to color code my spreadsheets in Excle. Hwoever. How can I set it to stop when Cloumn G = the word "Created"?
Sub prettyPattern2()
Dim lRow As Range
For Each lRow In Range("A6:K500").Rows
Select Case lRow.Row Mod 2
Case Is = 1: lRow.Interior.ColorIndex = 34
Case Else: lRow.Interior.ColorIndex = 35
End Select
Next lRow
End Sub
Well I am back to the colour coding of protected cells
I am using excell 2003
Many cells in the worksheet are locked
My problem is that when I am debugging I forget to turn sheet protection on
when I am finished And then users can overtype the cell formulae
How can I set excel up so that when the sheet is protected all the Locked cells have a green background , but when the protection on the worksheet is turned off
then the locked cells must be a red
How to "hard code" a cell's fill color? I want to assign a cell's fill color to yellow. While setting the fill color is easily done, my problem is that as soon as I paste data into that cell, it looses its fill color. Is there a way to tell the cell to never change the fill color?
View 1 Replies View RelatedVBA code in worksheet won't revert a changed cells color back to 0(white) after removing the comment.
Observations: code does set the desired cell colors to Yellow after inserting a comment, however removing said comment, and re-activating the worksheet does NOT reset the color after deactivating/re-activating the worksheet.
[Code] ......
I am looking for code that would delete all columns in a worksheet that do not contain a fill color.
View 9 Replies View RelatedI have cells in range L12:BN1000 with formulas that will output a 1 or a 2.
If the output is 1, I would like the cell to color yellow
if the output is 2, I would like the cell to color orange
the reason I dont want to use conditional formatting is because the use needs to be able to copy and insert rows and by doing so the use would need to manually add the new cells into the conditional format range. I would like to come up with a macro that applies this condition to a large range.
also, were do I add this macro? under sheet1? this workbook? or as a module?