The Value In The Field Should Not Disappear After Refreshing A File
Apr 6, 2009
I have got this in a pivot table
Customer Total sales(USD)
30010 500.00
30041 2000.00
In another column I enter a comment for customer 30010(and leave the comment column for customer 30041 blank) as below
Data 1.xls
Customer Total sales(USD) Comment
30010 500.00 Test 1
30041 2000.00
Later on the content of the file changes as below:
Customer Total sales(USD)
30025 1500.00
30010 500.00
30041 2000.00
When the file is refreshed I would like to have comment as per the former file i.e the comment “Test 1” should appear against customer 30010 and similarly for any other customer that I enter the comment.It should be as below:
Customer Total sales(USD) Comment
30025 1500.00
30010 500.00 Test 1
Customer Total sales(USD) Comment
i have a file that needs to have daily postings to it, I would like for it to automatically generate today's date and then if you change figure 1, it carries over to figure 2.
This is a code that i have for having a master workbook, and saving it in different folder so my employee cant access it
Sub NextInvoice() Range("J2").Value = Range("J2").Value + 1 Range("E6:E9,H9,J9,B14:K20,H4,B28:K32,B36:B39,D36:D39,F36:F39,B42:K43,B46:K47,B50:K51,B54:K55,B58:K59,B62:K63,B66:K67,B70:K71,B 74:K75,D78:E78").ClearContents End Sub Sub SaveInvWithNewName() Dim NewFN As Variant 'Copy Invoice to a new workbook
[code].....
I have found a code for mandatory cell, but it creates a second macro and i was not able to link the two.The mandatory field has drop down of employee's and it is located in the cells D78:E78.
But when i click in the cell to edit the formula the {} (at the beginning and end) disapear and the formula no longer works. If i add them back manually the formula still does not work.
How can i edit these formulas without stopping them working.
I have a formula in C5 = IF(C$1=$A$2,($J$3-B$4)/COUNTA(C$1:$J$1),"") the problem is, when I will copy the formula in C5 and paste it to D5, E5, F5, G5, H5, I5 & J5 respectively, the value will disappear. What should be my formula in order not to disappear the value?
ABCDEFGHIJ108-Mar-0915-Mar-0922-Mar-0929-Mar-0905-Apr-0912-Apr-0919-Apr-0926-Apr-0903-May-09208-Mar-0914-Mar-0921-Mar-0928-Mar-0904-Apr-0911-Apr-0918-Apr-0925-Apr-0902-May-0909-May-093Planned Cumulative1204Actual Cumulative15Remaining Qty. per Wk14.88
I have an excel document that looks all nice and pretty except for the little white grids all over it with unused cells. Is there anyway to hide the lines? i dont care that the cells are there just the lines make the form look kinda crappy.
One of my workbooks won't allow me to use the VBE variable types (VBProject, VBComponent, etc.) They aren't on the popup list that appears when I type " as ". If I just type in "VBProject", I get a compile error "User-defined type not defined". I have to define the variable as object, and the macro still works. I do not have this problem in any other workbook.
before i run my macro, i would like a msg box that appears that says "please wait, this may take a while". I've tried using the msgbox function but unless the user presses the "OK" button on it, the macro won't run....
any suggestions on how i can have a userform/msgbox appear while the macro is working in the background (without the user having to press "ok")
I think I asked this in a much more complicated & confusing way before; hoping this makes more sense. I'd like to set something up so that when a name is entered in ColA of sheet1, it disappears from a list of names in ColA of sheet 2.
In recent weeks, when I've been asked to demonstrate excel applications which make use of buttons, I've found that on some machines the buttons will variably display as flat grey rectangles with no label, or boxes with red 'x's, or alternatively not appear at all. There seems to be no pattern since the variations have all happened on single machines, then not at all on similar machines.
So far it has only been company laptops (not my own machine), hooked up to overhead projectors which end up with this problem. I can't think of anything I would have done manually to disable the buttons from appearing.
Is this a known issue, or is this simply down to the user preferences and/or security settings?
In the following extract, I would like to have today's date placed into Col K when an entry is made into Col J.
Entry into Col J is from a validation list of 3 options. What I desire is that when one of these options is selected ("Complete"), then I would like today's date to be written into Col K.
Currently Col K has a validation list which comprises dates from 1st of each month from July to June.
I need a fixed date as text preferably, so was thinking the VBA function "Date" on a Change Workbook Sub.
The information is currently part of a Table in Excel 2007 that has about 500 records.
I have a macro that imports a report. If the Charge Type in column A is BTOREPLX, I need to prefill the field next to it in column B with the text "REPLX", e.g. "REPLXCDROM". I've attached an example of the report.
In building my pivot table my data that I want to show in the column area is showing up as rows stacked on top of each other. In the column section I'm trying to show Total Budgeted Amount next to Total Actual Amount but on the layout it's showing the two stacked on top of each other is there some kind of hidden key that I'm missing?
I have been working with one sheet (call it tab A) that has 40-50 vlookup formulas that reference another sheet (call it prices) within the same workbook. Everything worked fine. I change my prices tab and everything auto changes in tab A.
Now I copied 'tab A' 22 times creating tabs B - W. I need to slightly modify each tab and based on my prices data, print out the appropriate tab.
Problem is now, when I change my pricing tab, tab A - W do not update. F9 does nothing. Rebooted didn't work. If I go into the formula and hit F2 to edit & return it recalculates to the correct data. But I can't get it to auto update.
I have a worksheet on which i use vba Usedrange to determine all the cells that are being used, but it only picks up all the range after the worksheet has been saved. It seems that the "usedrange" property only holds the actual usedrange at the last time the workbook was saved.
Is this correct?
If so, is there another way to "refresh" the usedrange property without saving the workbook.
If not, is there another way I can determine what the usedrange actually is at any point in time?
Why after the first loop (Z=2) all of a sudden column A in WS ATT disappears. Worth adding that column M in WS L is a "dynamic" range (at first it contains 7 cells) in the sense that it shrinks with each loop (M2:M8, second loop: M2:M7 etc.).
I have a worksheet (in a workbook with many worksheets) where some of the cells display the formula I put in after I leave the cell. I've made sure that the cell format is General before I type anything in the cell. I've inserted new rows, above where the problem is and have tried going to another cell in a different part of the work sheet but I have the same problem. I use the same formulas in two other worksheets. The formulas include other worksheets in them. example =IF(PlotMaster!B2="","",PlotMaster!B2). I can't figure out what is going on.
I've created some code so that when users want to update something on and Excel template I'm creating for them that the information they've put in is backed up. They give the backup a name using an inputbox and it loops through previously loaded backups that I've stored in a separate sheet and checks if the backup already exists. If it does a msgbox appears to ask them if they want to replace the existing copy. If they choose not to, it re-opens the inputbox.
The issue I'm having is that the msgbox doesn't close before the input box opens and it looks messy and may be confusing. Is there any way, without creating a useform, that I can force the msgbox to close once the user has made a choice before the inputbox opens?
Here is the code:
Code: 1 BackName = InputBox("Give the backup a name", "Backup Name") If BackName = "" Then GoTo 2
For i = 1 To LR1 If UCase(Sheet18.Cells(i, 1).Value) = UCase(BackName) Then If MsgBox("Backup already exists. Replace?", vbYesNo) = vbYes Then
I created a macro that prints a label from a userform. The macro used to reside on an XP platform and performed without issues. IT decided they wanted to upgrade the machine to a Windows 7 platform. Now when the userform prints a small window pops up that looks like a print preview of the label, however it is transparent and has a window caption of 'Precut Label' as identified in the userform design. I am including a screenshot of the pop-up. The unusual thing about this is the window cannot be closed, moved or selected in any way shape or form. The only way to get it to close is to view the userform object in the vba editor. The line of code that triggers the print sequence as well as cause the pop-up is: frmLabel.PrintForm. This line of code is housed in the sheet1 object.
I have two option buttons. I would like to have a command button disappear if one option is filled and reappear when the other option is filled. What is the best way to do this?
I have a simple formula ='info page'!b2&'info page'!b5 in places that on my sheet adds a company prefix to a item number, prefix in b2 and item in b5, we have a client that we cant use prefixes but now when I leave the field blank its giving a zero and thats not good either. I'm pretty sure an IFERROR or something will work but can get the syntax right.
I have this workbook to keep track of current and new work for the team - each individual inputs information on their own tab.
In turn, the current information is displayed on a summary page so we can all see who's doing what.
I want to protect that summary page and its formulas from accidental amendment.
However, while the summary page (when unprotected) updates as soon as someone enters new information on their own tab, the summary page won't update when I have it protected.
Is there any way of doing this - preferably without VBA as it's a work situation and the employer doesn't like VBA code running?
I've built a spreadsheet with quasi-animation for a physics class on projectile motion. In it there's a animated chart showing velocity change as a function of distance. The chart has on it an ActiveX textbox that refers to a cell that contains a formula showing "V_y = {velocity}". I've tried a number of things to get the display of the textbox to change during the animation. If I break the code at the line that updates the cell referenced by the textbox the display changes. But I can't figure out how to get the display to update while the code is running.
Im using slicers of a pivot table which has been generated from a sheet containing around 50 rows of data - not a lot of information. I deleted the information, then started re added information. I then refreshed the pivot table which worked but the slicer still contains information that I input a week ago. I deleted the slicer an cretaed a new one but again, it still contains data from a week ago even thought the pivot doesn't. How to make the slicer refresh to show contains of the pivot?
If i open the excel all the cells with this similar formula show as 0. If i press Shift+Ctrl+Alt+F9 then they calculate.
I have another SUMPRODUCT formula on another worksheet in the same book that seems to be fine. =SUMPRODUCT(--(Data!$B$7:$B$2000="FG"),--(Data!$E$7:$E$2000=B7),Data!$M$7:$M$2000)
I can only assume that the reason why it's not calculating automatically is to do with the TEXT "mmmm" reference, is that correct?
Is there anyway i can have it autocalculate so that if i send this as a report i don't have to ask the ppl looking at it to please press Shift+Ctrl+Alt+F9 when they open it :P
