Why after the first loop (Z=2) all of a sudden column A in WS ATT disappears. Worth adding that column M in WS L is a "dynamic" range (at first it contains 7 cells) in the sense that it shrinks with each loop (M2:M8, second loop: M2:M7 etc.).
[Code] .....
My excel workbook has 3 sheets, payments, invoice data and invoice. Payments and Invoice Data contain a table that has been exported from access, I have used an advanced filter macro, to filter records based on payment id, the button for this macro is on the "invoice data" sheet, the same button will filter records even on the "payments" sheet. You will notice in the payment sheet, the total payment field is blank, i used cell referencing to equate the cell C21 in the payment sheet to the cell H20 in the invoice sheet, so basically, once the sort button is clicked and advanced filter is done, the total payment will show in cell C21 in the payment sheet. I would like to create a button that runs a macro that will enable me to save the data i have clicked on cell C21 on the table above it, so i could import that table back to access.
View 1 Replies View Relatedwhy the Advanced Filter works in the macro but not in the UDF?
Code:
Public Function strUniqueVal(rng As Range) 'rng variable must include sheet name
Dim c As Range
rng.AdvancedFilter Action:=xlFilterInPlace, Unique:=True
[Code]....
my VBA code to uniquely filter a column of values ( Cells E7:E65536) in Sheet1, and to paste the filtered results into column B (starting at cell B3) in worksheet Sheet4 in the same Excel workbook. Will the code below work?
More importantly, does the AdvancedFilter method allow for the filtered results to be deposited into another worksheet within the same workbook?
Worksheets("Sheet1").Range("E7:E65536").AdvancedFilter _
Action:=xlFilterCopy, _
CopyToRange:=Worksheets("Sheet4").Range("B3"), _
Unique:=True
I have a set of Raw data which I'd like to filter based on Manager. The Manager is not defined in the Raw Data, only the products he's responsible for. One manager can be responsible for multiple products.
I have attached an example which shows what I have right now.
Small clarification:
- RawData contains the daily gathered info
- A list is created based on Product under the Master tab
- A link on the RawData is created to avoid the "You can only copy data to the Active Sheet" error.
- A Macro is created to filter the data, and assigned to the button on the Filter tab
Currently you can select per product and show that data.
The goal is to select a Manager and then show the data he's responsible for (Manager Mike will show all lines containing products "Prod X and Prod Y")
While we're on the filtering, what is needed in the Macro code to only display active fields (ie. not show Unused)?
I am doing a project with these instructions:
The state, capital and population of all states with a population greater than 10 million or less than 1 million. (population)
The state, tree and bird of all states with a bird or tree that starts with Eastern or Western (symbols)
The state, population and area of all states with area between 100,000 and 200,000 (area)
I am having troubles with selecting just the three criteria (state, capital, and population) on my Population worksheet. Attached is my work. The copied filter keeps copying all of the data in the data set, and not those three.
I am looking for a function or a formula that performs the same process in Excel 2010 as:
Data Tab -> Sort & Filter -> Advanced -> *radio button* Copy to another location -> List range: A1:A100 -> Copy to: B:B -> *radio button* Unique Records only.
I run a football sweepstake involving 120 people. Each week everyone picks a premiership team who they think is going to win. If that team loses or draws they are out. This carries on until there is one person left and they win the money. I need to make a table with all the premiership teams and names down the x and y axis. When the team is marked as "lose" everyone who has chosen that team gets deleted.
View 5 Replies View RelatedI have a spreadsheet with multiple columns:
Column B - Host Contact
Column C - Company Name
Column D - Attendees
Column E - Contractor Position
Column B will have anywhere from 1 to 10 names.
Column C will have 1 -2 names.
Column D will have anywhere from 1 to 10 names.
Column E will correlate with column D.
This list will go to multiple people who will want to filter column B for their name. When they filter their name, they should see all values in columns C, D and E.
When I try to filter this spreadsheet by a persons name in Column B, it only shows me the first value in columns C, D and E.
One of the attached pictures shows a mock-up of the unsorted list, the other shows the sorted list.
Sorted Format.PNGUnsorted Format.PNG
I have a worksheet which shows multiple tests and whether they are completed or not[code]Test 1 Person1 Test 2 Person2 Test 3...Person12. I want to search for a specific test, e.g. pH which could be in any of the "Test" columns but only return it if it is not completed. The "Person" columns will be blank if no one completed the test.
I set up the Advanced Filter criteria with all the appropriately labeled columns and for the Person columns, I put ="" but it is returning all rows which have pH in them whether they are completed or not. What should I be putting in the Person columns of the criteria to only return those rows which have the pH test but it is not completed. I attached an example of the criteria range and the filter window to help clarify (the full spreadsheet is huge)
i need to write a formula that spits out the average of a series of numbers when (if):
every time "CAD" appears (column A) it takes the numerical figure of the cell directly to the right of it (column B). the data is arrange vertically, e.g., the range of "CAD"s is all vertical (column A), about 200 entries.
is there a formula/function that takes data from the columns completely adjacent to one another?
I am trying to do is filter out one column of data with another. Basically if a value from column A is in column B... delete it.
Here is code that I am using:
Sub filter_out()
' filter_out Macro
' this will scan one column and remove cells from it that
' are in it that are in another column
Dim INV As Range
Set INV = ActiveSheet.Range("A2")
Dim MW As Range
Set MW = ActiveSheet.Range("B2")
I keep getting object errors and it fails...
How (or if) you can put multiple filters into one column? For example, I have a main cell with sub cells (that need to be filtered), and those sub cells have sub cells (that need to be filtered). All withing a single column. I have an example of what my data looks like in the attached.
View 4 Replies View RelatedI have been trying to transpose a piece of code that was put on this forum back in 2005 into my own Workbook but have been unsuccessful. The original piece of code filtered a column for unique entries and then filtered the main sheet for each unique entry and cut and paste each row that the unique value occurred in and in a new worksheet. A new worksheet would be created for each unique filter.
So what I am trying to do is look up a list of values that i have in a list on the worksheet. Then for each entry in my list, create a new page and cut and pasted the filtered main worksheet into that page.
Finally return to the main worksheet and then remove all filters.
I have attached the original file that was submitted so you can look at how it works and I have posted a sample my worksheet (with some things disabled to reduce file size but hopefully you will get the layout. However I don't currently have that sample on this computer. It is posted on another thread under the title "Selecting rows with specific values in a column".
This may be a basic question but I haven't been able to find the solution:
I'm using Excel 2003. I have a list with repetitive entries in one column and unique entries in the other columns. Example
0001 a
0001 b
0002 c
0002 d
0003 e
0003 f
I need to filter the list so that only unique entries in the first column show up, but I need the rest of the information to carry with it. Example:
0001 a
0002 c
0003 f
I can't use the Avanced Filter > Unique Entries Only function because the information in the adjoining columns is not unique.
I am currently writing a macro that does a variety of things, one of these being that it automatically sums up columns I,J and K. The dilemma I have is that I need to be able to see the sum of the data in a cell at the bottom of the column, after manually filtering it according to what I want to see.
View 4 Replies View RelatedColumn A
Row1 Orange-Apple-Pear
Row2 Orange-Grapes-Melon
Row3 Berry-Apple-Melon
Row4 Banana-Grapes-Melon
Row5 Orange-Grapes-Banana
Given the information above:
I want to find a macro that will auto filter on for example
"Banana" would filter to rows 4,5
"Orange" would filter to rows 1,2,5
"Apple" would filter to rows 1,3
How would I fix my formulas from not working when I filter other columns? It is a simple =A1/A3 cell and this calculation is down the full column. When I filter any column, the calculation does not stay with the assigned cells.
View 2 Replies View RelatedI need to create report (just summing up) based on values in two different columns. I need a VBA to do it as the column values may vary at any time.
I have attached a sample workbook for your kind reference.
From a table like the one here, how can I generate a list (without spaces) of all the names only? Perhaps filtering by "Mr","Miss","Dr" or something? The result I'm after would be a column on a new sheet that ran:
Mr James
Mrs Milly
Dr McAllister
Miss Aujard
Mr Barker
Mrs Stanley
I have a formula
{=IF(OR(D9=M4:S99),"m")}
For instance
This formula works
But when i click in the cell to edit the formula the {} (at the beginning and end) disapear and the formula no longer works.
If i add them back manually the formula still does not work.
How can i edit these formulas without stopping them working.
I have a formula in C5 = IF(C$1=$A$2,($J$3-B$4)/COUNTA(C$1:$J$1),"") the problem is, when I will copy the formula in C5 and paste it to D5, E5, F5, G5, H5, I5 & J5 respectively, the value will disappear. What should be my formula in order not to disappear the value?
ABCDEFGHIJ108-Mar-0915-Mar-0922-Mar-0929-Mar-0905-Apr-0912-Apr-0919-Apr-0926-Apr-0903-May-09208-Mar-0914-Mar-0921-Mar-0928-Mar-0904-Apr-0911-Apr-0918-Apr-0925-Apr-0902-May-0909-May-093Planned Cumulative1204Actual Cumulative15Remaining Qty. per Wk14.88
I have an excel document that looks all nice and pretty except for the little white grids all over it with unused cells. Is there anyway to hide the lines? i dont care that the cells are there just the lines make the form look kinda crappy.
View 4 Replies View RelatedIs it possible in a Label caption to be visibile in a second?
I just want, when the user hit the commandbutton1, a label will be visible in a second and then disappear again after 1 second.
One of my workbooks won't allow me to use the VBE variable types (VBProject, VBComponent, etc.) They aren't on the popup list that appears when I type " as ". If I just type in "VBProject", I get a compile error "User-defined type not defined". I have to define the variable as object, and the macro still works. I do not have this problem in any other workbook.
View 3 Replies View Relatedbefore i run my macro, i would like a msg box that appears that says "please wait, this may take a while". I've tried using the msgbox function but unless the user presses the "OK" button on it, the macro won't run....
any suggestions on how i can have a userform/msgbox appear while the macro is working in the background (without the user having to press "ok")
I think I asked this in a much more complicated & confusing way before; hoping this makes more sense. I'd like to set something up so that when a name is entered in ColA of sheet1, it disappears from a list of names in ColA of sheet 2.
View 9 Replies View RelatedIs there a macro that can make cells with no data in them disappear or not be displayed?
View 9 Replies View RelatedIn recent weeks, when I've been asked to demonstrate excel applications which make use of buttons, I've found that on some machines the buttons will variably display as flat grey rectangles with no label, or boxes with red 'x's, or alternatively not appear at all. There seems to be no pattern since the variations have all happened on single machines, then not at all on similar machines.
So far it has only been company laptops (not my own machine), hooked up to overhead projectors which end up with this problem. I can't think of anything I would have done manually to disable the buttons from appearing.
Is this a known issue, or is this simply down to the user preferences and/or security settings?
I have a worksheet (in a workbook with many worksheets) where some of the cells display the formula I put in after I leave the cell. I've made sure that the cell format is General before I type anything in the cell. I've inserted new rows, above where the problem is and have tried going to another cell in a different part of the work sheet but I have the same problem. I use the same formulas in two other worksheets. The formulas include other worksheets in them. example =IF(PlotMaster!B2="","",PlotMaster!B2). I can't figure out what is going on.
View 1 Replies View Related
