i type into any cell in row 1 i need the time at that moment to be captured and shown in cell "B". When i type into row 2, the time which i entered the data must be captured into row 2 cell "B".
View 5 RepliesI have a column (D) where I put percentages complete of a task. When that reaches 100% I want to put the date in column (C).
I found many samples online but nothing I can modify to do this.. This one is pretty straight forward but I'm not sure how to have it look for the value and not just empty or not. I would be greatful for any help you can offer.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column <> 4 Then Exit Sub
If Target.Row = 1 Then Exit Sub
If IsEmpty(Target(1)) Then Exit Sub
If IsEmpty(Target.Offset(0, -1)) Then
Target.Offset(0, -1) = Date
Target.offset(0, -1).numberformat = "yyyy-mm-dd"
End If
End Sub
I am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
View 5 Replies View RelatedI have cells on my spreadsheet which contain: =now() and they work as they should - displaying the date and time at the moment of entry. Unfortunately the cells update when other info is added at other locations on the sheet - is there a way to ensure they enter the current 'now' only at the point of initial entry - such that the data doesn't then alter?
View 3 Replies View RelatedI am trying to create a time stamp that shows elapsed time. So I enter my start time, and if I enter any text in cell B7, return the elapsed time in A7 based off of start time in A6. I have attached an example workbook.
View 2 Replies View RelatedI want to add hours to a date-time cell to get result in date-time.
Format of cell A1 is d/m/yy h:mm AM/PM
Format of cell A2 is General
Format of cell A3 is d/m/yy h:mm AM/PM
I want to add A2 (number of hours) to A1 to give A3.
The formula I used is A3=A1+Time(A2,0,0)
The formula works perfectly fine when A2 is less than 24, but when A2 is more than 24, the date doesn't get changed.
I am looking for a command that will time stamp a cell with just the time, not the date. I've already looked at =Now(), but that, unfortunately, includes the date as well. I just need the 24hr value.
View 2 Replies View RelatedI have a large number of cells with time stamps: 00:07:45 (hh:mm:ss)
What I would like to do is just show the mm - but NOT format the cell as [mm], just as a general / number '7'.......
I have a userform that completes various functions and updates cells when a single button is clicked. Can I add code to the the end to enable a cell to be updated with the time and date, say cell A1 for example? Also is it possible to have the (Windows) username in another cell (all users will be unique) so it will save Jo Bloggs for example? I know this is possible as a Worksheet function:
View 2 Replies View RelatedI want to time stamp when I make an entry in to a cell. Example when I enter a name in a32 I want l32 to time stamp the time I entered the name.
View 10 Replies View RelatedI need VBA code for a time stamp. I just need code that will allow me to have a time stamp inserted in the current cell.
View 2 Replies View RelatedI've got a simple code that creates a new text file in which progress of the macro is logged. I wanted to add also time stamps at the end of each line, so that the user can see when a given stage of the macro finishes working.
[Code].....
And then, in various portions of the code, after certain jobs are finished, I simply add:
[Code] .....
And it all works fine, only the problem is the time stamp is not updated... So say I run the macro at 10:00 - the time stamp on each line shows (date) 10:00...
I want to put a permanent date & time stamp in cell A1 (date) and cell A2 (Time) when cell A3 is populated by any character which would be an inputters initials.
I'm thinking that it will be an "IF" statement but then I am getting confused about how I make it not update when the spreadsheet is opened at a later date and time.
I am looking to add a function to a current spreadsheet that writes the current date to a cell when another is updated. The sheets function is to have a user record when a particular action has been completed and then remind them after a given amount of time. The user is faced with an option to input a "1" to essentially "start the timer" and then the date that is automatically input by the code will be used to compare with the current date. I have tried the following on the Workbook_SheetChange sub
If ActiveCell.Column = 9 And ActiveCell.Value <> 1 Then
ActiveCell.Offset(-1, 2).Value = Date
End If
But cannot figure out how to eliminate user error. Let me explain. If a user enters a value (will only ever be a 1 to indicate "yes") into column 9 then the date appears in the correct place (two cells to the left) If however a user deletes a value then the date will update one cell too high!? I also thought of using a cell based if statement (if j7 = 1 then today() else "" but this only updates with todays value each time you open where I want the date to stay as the day the cell was updated. The date is going to be used as a way of working out when to change the original value of the cell in column 9 to "".
How would I go about displaying in a cell the time from the last entry to the current but show 0 time if the range is empty?
E5 to R6 currently has space for numbers to be entered.
E3 has the command =NOW()
I would like E7 to show "xxx minutes have passed since last entry" where xxx would show 0 while the range is empty.
I have an array starting at, lets say "C25" -header line Row 24- with data entry and calculations to Colume "AW25".
Each row represents a data record for a project, where different data types are used (Number & Text).
A "termination" row is set as last row.
New records are always enterd in row "25", but any row in the array is allowed to be deleted.
The number of rows can be extended or reduced, when entering/ deleting a new record (not all info are mandatory for calculations) - basic data is followed by lots of calculations for the record.
This leads to the issue that the array is dynamic regards amount of row.
To make it even more "fancy", the array can be sorted using data filter from row "25" to "last row -1".
I need to track when a record (any cell in the row) has been accessed/ modifed/ enterd last. The time stamp may only be altered when the particular record (row) is modified and NOT in case any of the cells is modified (NON-valotile)
I have foreseen to enter that date in Colum "Bxyz" of the array.
For a referrence I still have Colume "A" as "spare".
Depending on time difference I've to mark the "date" cell with conditional formating (this is an easy task I know how to do...).
Does any one has an idea how to implement such routine (sub or Function)..
Remeber, number of rows varies - up to now there are just 310 records, but will be much more in future.
Not to forget ... some of the Colums have data avalidation set...
How can I make a hot key that puts todays date and my name on it so I don't have to type it over and over again?
I have a system of checkboxes and now I need a time stamp when the check box was marked TRUE. They ar linked to cells so the solution can be either linked to a cell or to a checkbox. Obviously I can't use Today or Now functions because they are refreshed. I found many solutions for time stamps when a change is made in a cell, but none of them worked for me. I tried altering them with no succsess. I would be very happy if the solution would apply to the whole column, not one cell and checkbox, because I have A LOT of checkboxes.
The checkboxes are in column B and I want the time( date) stamps in column C.
how to Make a forecast for the demand for the time periods shown....
View 9 Replies View RelatedI have been able to use a time stamp code to put a date and time in a cell... I then worked out how to use this to list dates and times in the same cell (instead of replacing the cells contents)... using this
View 7 Replies View Related device a macro which should be able to provide a time stamp in Column B when the adjecent cell in Column C is updated.
i.e. If C1 is updated, B1 should get the time stamp. *& if the value in C1 is removed, then the time stamp in B1 should also be removed.
In addition to this, I would require the macro to unprotect the sheet before updating the timestamp and protecting it again after the time stamp has been enetered. further moving on to saving the sheet.
I tried to combine few updated macros to complete it bu have been unable to do so.
This time stamp macro is great but I would also like to record the person who said 'Y' in the same cell as the date stamp '12:00p.m. MWatson'. The persons name should come from the Username.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range([P13], Cells(Rows.Count, "p"))) Is Nothing Then 'change your range on this line"
With ActiveSheet
If Target.Value = "Y" Then
Target.Offset(0, 1).Value = Now
[Code] ........
I would like to take this VBA a step further. What I want to achieve is to date & time stamp a worksheet in cell A1 if any other cell within the sheet is altered. Below is the VBA I used today to enter the info if cell A1 is changed. Can anyone please help with my new target.
Just one more question: When a shared file is used is it possible to also enter the username of the person who's made the alteration.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
' Only look at single cell changes
If Target.Count > 1 Then Exit Sub
' Set Target Range
Set rng = Range("A1")
' Only look at that range
If Intersect(Target, rng) Is Nothing Then Exit Sub
' Action if Condition(s) are met
Target.Offset(, 1) = Format(Date, "d mmm yyyy") & " " & Format(Time, "h:mm") & " Hrs"
End Sub
I can't figure out how to get a date/time stamp to show when the spreadsheet was last updated.
View 9 Replies View RelatedI found the code below in a previous tread, it works great, but i need some help altering it. I have it set-up when someone puts their initials in column B the time and date inputs in column S. But it also inputs if I hit delete or clear contents when I need to clear the form. Is there a way to make it input the time and date ONLY when letters are entered in column B?
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 2 Then
Application.EnableEvents = False
Target.Offset(0, 17).Value = Now
Application.EnableEvents = True
End If
End Sub
I have 2 barcode scanners on opposite ends of a conveyor. Barcode data from reader 1 inputs the data in Column A. Reader 2 will be inputting its data into J2. When J2 has data inputed, I would like to match that data to column A. On the row where the match is found, I would like to transfer a "Yes" to column H and a time/ date stamp in column I. Once this has occurred, clear the data from J2. I will have a minimum of 20 seconds between the scans on the second reader.
View 2 Replies View RelatedThe following code was supplied by Bill, but I want to do the same thing in B10:B164, where "x" is entered in B10 and the time stamp is entered in C10 & D10.
I tried copying the same script but had an Compile error message which said Ambiguous name detected: Worksheet_Change. The name of the sheet is Sheet 1 (Main)
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("M10:M164 ")) Is Nothing Then 'change your range on this line"
If Target.Value = "x" Then
Target.Offset(0, 1).Value = Now
Else
Target.Offset(0, 1).Value = ""
End If
End If
End Sub
I have tried several macros and different code to accomplish the following:
1. scan a 3x9 barcode via hand-held scanner to populate a cell in column A, lets say A2.
2. the scanner does this and puts the number, say "330030" there (via the forms function)
3. in column B I would like it to say the date and time of the scan
4. the macros I have used will 'sometimes' populate the date / time but when I reopen the sheet, everything changes to 'NOW'. I would like the data to not change the date.
This is for a simple inventory spreadsheet that I am building to track movement of stock.
The 'gist' of what I need is for events scheduled (top of spreadsheet), no school can be placed into an event within 29 minutes (because one-half hour apart IS ok). The time increments are on the left side of the spreadsheet (rows). I'm trying to "automate" somehow so that if we try to plug a school into an event too soon from their last event, the spreadsheet won't allow it.
View 2 Replies View RelatedI am having a very difficult time making this work, if there is anyone who can assist me, I would greatly appreciate the assistance. You can see below what I am trying to do. The entries between the last cells H,3 & K,3 just contain data that is not affected by the rest of the sheet functions.
Cell one (A,3) has a drop down menu for vehicle status.
(B,3) vehicle number
(C,3) Drop down vehicle type.
(D,3) is for dept.
(E,3) Date/Time stamp auto generated from (A,3) entry. (Vehicle Status)
(F,3) is POC.
(G,3) Phone/email.
(H,3) Date & Time stamp out of shop. (This cell will recieve the date & Time Stamp from entry of work done in (K,3)