How would I go about displaying in a cell the time from the last entry to the current but show 0 time if the range is empty?
E5 to R6 currently has space for numbers to be entered.
E3 has the command =NOW()
I would like E7 to show "xxx minutes have passed since last entry" where xxx would show 0 while the range is empty.
i type into any cell in row 1 i need the time at that moment to be captured and shown in cell "B". When i type into row 2, the time which i entered the data must be captured into row 2 cell "B".
View 5 Replies View RelatedThe 'gist' of what I need is for events scheduled (top of spreadsheet), no school can be placed into an event within 29 minutes (because one-half hour apart IS ok). The time increments are on the left side of the spreadsheet (rows). I'm trying to "automate" somehow so that if we try to plug a school into an event too soon from their last event, the spreadsheet won't allow it.
View 2 Replies View RelatedI am creating a log to keep track of my start and stop times when I work on a project. I have two columns labelled START and END and I can use a macro button to make the current date and time appear in the cell under these headings. What I haven't been able to find is a way of getting the macro to move to a new blank cell ready to accept the next entry. For instance, move one cell to the right or move one cell down and one to the left.
Can anyone tell me how to do this? (recording it just names the cell so it always goes back to that named cell.)
Trying to write an if statement giving a simple value of 1 if a time is outside of weekday hours 8am to 9pm. Cell formatted as (6/3/17 2:15 PM). Function should report "0" value as this is a Tuesday between 8am and 9pm.
A cell formatted as (6/3/14 7:54 AM) should result in "0" value.
I have a bunch of data and I want to be able to count the number of entries that fall within each of the 24 hour increments in a 24 hour clock. (military time)
For 12:00:00 all times would be between and including 12:00:00 and 12:59:59
Column B | Count
------------------
12:00:00 344
13:00:00 44
14:00:00 5
Basically each line signifies a date & time that a deposit was placed and a date & time that a withdrawal was actioned. My goal is to be able to determine what kind of average response time we have between the time a withdrawal was requested and the time a withdrawal was actioned.
View 2 Replies View RelatedMany years ago I created a complicated spreadsheet that calculated employees's leave, sick, vacation etc. The timekeeper would indicate the amount(s) used for a particular day and it would automatically calcuate. The problem with this is that the time keepers do not use .25, .50, or .75 for the fractured time. Instead they used .15, .30 and .45. Previously, I used a convuluted if statement looking to the right of the leave to figure out what and how to calculate it and I'm trying to revamp it to make it more streamlined.
View 14 Replies View Relatedi have a slight problem i have this script which i want to run on all worksheets which are numbered (i.e. 1,2,3,4 etc) and to delete the rows in the F128 range which is under 00:05:00. I just cant figure it out to get it working.
View 2 Replies View RelatedI have a database of over 10,000 entries. I am trying to get the average time for four specific entries (department, test 1, test 2, test 3). I did an averageifs for the tests individually and calculated the average time individually.
The three tests comprise of the department.
Average of test 1 = 40.8
Average of test 2 = 39.9
Average of test 3 = 94.8
Average of dept using the averageifs is 41.3
Average of dept by taking the average of the values above is 58.8
Why is that discrepancy there?
I have an excel spreadsheet that has about 40,000 rows....and about 30 columns across. The two columns I'm writing this about is column "PO#" and column titled "VALUE". The PO# column will have a number such as 4500234567...and the value column will have the cost of the PO#, for example $5,000.
Now within the the spreadsheet the PO# number and value will be listed multiple times....and there are hundreds of PO#'s listed, with its value.
I would like to perform some kind of filter on a seperate worksheet (? or whatever i needed) that would show the PO# number and value once.
I need to generate a report that indicates how long it took a vendor to respond, and indicate if the time was less than 2 hours.
I'm having trouble with a formula that will indicate how long it took for the vendor to respond during business hours (8-5 monday through friday). I can easily calculate the total elapsed time, but I'm at a loss on how to account for the after hours time period.
Would this be better handled with VBA?
I'm trying to find an easy method of recording the available hours of operation for an airfield which can close a couple of times a day due to weather.
The attached sample explains it better.
I have data entry in a spreadsheet which shows minutes, seconds and thousandths of a second - example looks as follows:
12:48:589 or 04:21:998. I would like to be able show the time difference between two data entries, so for example:
09:57:145 and 08:12:055 would give a difference of 1:45:090
12:07:985 and 18:59:788 would give a difference of 6:51:803
To be honest, I even struggled to work out the values on paper. Is this even possible? If so, can you let me know the number format I should be using as well as the formula or even better, post an excel sheet with the example.
I have a column (D) where I put percentages complete of a task. When that reaches 100% I want to put the date in column (C).
I found many samples online but nothing I can modify to do this.. This one is pretty straight forward but I'm not sure how to have it look for the value and not just empty or not. I would be greatful for any help you can offer.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column <> 4 Then Exit Sub
If Target.Row = 1 Then Exit Sub
If IsEmpty(Target(1)) Then Exit Sub
If IsEmpty(Target.Offset(0, -1)) Then
Target.Offset(0, -1) = Date
Target.offset(0, -1).numberformat = "yyyy-mm-dd"
End If
End Sub
I am trying to build a spreadsheet to calculate how many hours have elapsed between to entries; start time (H10) e.g. 9:15 AM and end time (I10) e.g. 12:15 PM. The formula that I am using in the calculation cell field (J10) is (I10-H10+(I10<H10))*24. This formula works great till I wish to include in an IF statement. What I would like is if the total hours calculated with the formula (I10-H10+(I10<H10))*24 is less than 4, return 4 (hours) otherwise the value. As well if there is no start time nor end time entered then return zero.
View 3 Replies View RelatedI have a large data set which contains four coloumns: Supplier, Supplier number, order number, and date/time of delivery. The date/time coloumn is formatted as YYYY-MM-DD HH:MM with a 24h time notation. What i want to do is to find deliveries that occurs within 1 hour and that are from the same supplier. So i basically want to group (?) the data with regards to the suppliers and then, within these subsets, check for date/time entries that occurs within 1 hour from each others by "reading" each date entry and compare it to the following one(s) (and maybe stop comparing when the 1 hour interval is passed)?
Furthermore, even if this one might be very hard, it would be good if i could make sure that the entries that are "tagged" as within a 1 hour interval, wont be used as basis for a new interval or be included in other intervals.
The result i am after would be number of 1 hour intervals for each supplier and the number of entries in each interval.
Below is an example from the date/time coloumn:
12-03-08 15:32
12-03-08 15:33 ... Interval with 2 entries
12-03-12 14:54
12-03-28 11:57
12-04-16 09:10
12-05-07 13:41
12-05-07 13:46 ... Interval with 2 entries
12-05-28 11:55
12-05-28 12:00
12-06-04 12:01 ... Interval with 2 entries
12-06-04 12:09
12-06-11 08:30
12-06-11 08:31
12-06-11 08:59 ... Interval with 3 entries
12-07-02 11:10
I have a UserForm which writes data to rows in a master spreadsheet. I'm attempting to write some vba code for a CommandButton in the master spreadsheet which can identify and delete duplicate entries based on "user ID", "Date", and "Time". I would like the CommandButton to retain the most recent entry from a user and delete all previous entries.
My master sheet is set out as such...
A, B, C, D,
UserID, Date, Time, Response
The users could potentially submit multiple entries on the same day. Ideally I would like to be able to click a CommandButton and delete each user's submission but retain their most recent one (based on "UserID", then "Date", then "Time").
I've searched all day for a solution and I've come close but I can not figure out a code that accounts for my three variables ("UserID", then "Date", then "Time").
=IF(E14<=0,0,IF(N9="yes",MAX(E15*C15,30),30))
I am currently using the above formula and need to make an addition to it.
If D8 is greater than 9000 and less than 9999 then the entry will be 35 rather than 30. Any other entry in D8 would leave it at 30
I have a spreadsheet where an engineer is expected to record sample temperatures of water outlets, along with the time he took the sample. Each outlet has a row on the spreadsheet with a column for the Temperature and column for the time. I would like to automatically input the current time(or time and date) on each line as the temperature is entered.
View 4 Replies View Relatedi have managed to pull together some code that will deny people adding data into cells if they have 5 of the same entry. the entries are entered in a range and are matched against a single cell outside of the range. heres the
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim greycell As Range, i As Long
If Not Intersect(Target, Me.[grey]) Is Nothing Then
Application.EnableEvents = False
For Each greycell In Target
If WorksheetFunction. CountIf(Me.[grey], greycell.Value) > 5 Then
i = greycell.Interior.ColorIndex
greycell.Interior.ColorIndex = 3 'red
greycell.Select
MsgBox "no cell entry past 5", vbCritical, "ERROR"
greycell.ClearContents: greycell.Interior.ColorIndex = i
End If
Next
Application.EnableEvents = True
End If
End Sub
what i need with is adapting this code to match two ranges as i cant use the worksheet_change event twice. i need it to be as if they were seperate events but are merged together. eg:.............
I have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is:
i) check whether they are in an input cell
ii) if so, then prompt the user with the 'Font Color' dialog box
iii) apply the font color selected to the input cell
I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
Colum A
Ticket No.
150258, 150268, 150269
150259
150249, 150266, 150271, 150279
Colum B
No. of Stillages
3
1
4
I have two colums. In A1:A4 are ticket numbers of products made. In B1:B4 are the number of stillages that the tickets relate to. What i am trying to work out, is a formula that will calculate the number of stillages produced based on the fact that each ticket number begins with "150". I have tried using COUNTIF, MATCH and FIND functions, but when i does work, will only return a value of 1.
I have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.
Raw Data: Formatted Data (2 cells):
2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758
2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698
2005/11/03 00:07:13.830
2005/11/03 00:10:14.971
What is the formula on B2 to drag down to count entries of cell 1 which are 10 and 10 result being 2.
View 4 Replies View RelatedI have some numbers I used to enter successively in Cell A5, what I want to get is the total of the entered number.
But I want the result to be entered in the same Entry Cell (A5)
Acually I tried many ways (VBA Codes and Worksheet Functions) to reach my goal but unfortunately I faild, so I hope that I find the answer here.
Money savedMoney Earned NameTotalNametotalNameTotalMarkJanieRobCyndiPamDiana
Here's a tricky one. The chart that shows the four columns are on sheet 1. I need a formula or a VLOOK array that will fill in the 2 columns with the 3 rows shown on the left which will be on a sheet 2. Lets say that all start with A1 in both sheets. The tricky part is, i want sheet 1 to be able to populate onto sheet 2 starting with the Name column first row no matter what name i select on sheet 1. Say that Janie earned money, but Mark didn't. I enter Janies info in Money saved & Money Earned. I get her total, and the end result should be her name showing on sheet 2 in the first row under name and her total showing on the first row in the total column. Also, i would need it to bump one up or dowm to the next adjacent column if i were to go beyond the 3 rows in the 1st set on rows in sheet 2. Say Janie, Rob and Cyndi all had info, but now Mark does, i want to be able to push the others down one and over onto the next set of columns.
I have a lengthy excel spreadsheet in which I catalog all of my Karaoke song collection. I would like to be able to automatically locate (not delete) cells in which there are duplicate song titles. For my purposes just finding these items quickly so I may deal with them in a manner I've already developed is all I want to do. VBA, Macro or whatever would be appreciated. I'm a relative novice with macros and VBA.
For example row 12 may have the song title "Crazy" in column C and later row 1200 may have the same song title. Manually searching the spreadsheet for dupliates is way too time consuming so I think it can be seen why I'm looking to unlock the power of excel to do this for me.
I have a worksheet(A) with rows of data associated to a date that gets a new row of data points once a month. On the second worksheet(B) I have two columns, one (Current Month) to show the data in the newest row (transposed), and one (Previous Month) to show the data in the row above it (from the previous month)(also transposed). Is there any way to get the columns in worksheet B to automatically read the newest row of data from worksheet A into column Current Month and automatically update the column Previous Month with the row above it?
View 7 Replies View RelatedIt lists single clients on single lines, with various column fields that have autofilters (such as where th client came from, when they arrived, who is dealing with them, are they complete and so forth).
The final entry I need to include is a list of th policies (it is a financial business) they need us to consider, split into three columns of life policies, pensions and investments.
My problem is that I am unable to put more than one policy in each of those columns which can then be sorted through the filters.
How am I going to achieve this, yet still keep one client per line?
