When I choose tools -----> options from the menu bar nothing happen I can not changes my options. I am using excel 2000, I must of changes something but I don't not remember what. Can someone help turn back this option
View 9 RepliesI use several different workbooks during the day, and sometimes I would prefer the " move selection after enter direction" option to = "Right" and sometimes "Down". It doesn't seem to be an option that is saved with the workbook.
what could be done to a workbooks code to change this option upon opening the book?
On one of my computers, Excel is freezing up just about any time I select something from the Tools or Format Menus (same goes if I use keyboard shortcuts to call any of those things). I have to kill it with the task manager. It is not a specific workbook, I've tried several, including new blank workbooks.
It's not all menus, as File options seem to work. I also am able to Autosize columns by double clicking, but basically any other formatting things (i.e. CTRL + 1) do not work. I also tried to show the Cell Format dialog via VBA, (note: I am able to get to VBA editor, etc...), and it locked it up then too.
Finally, I tried "Detect & Repair" from the Office disk, but that didn't do anything. Next, if necessary, I'll do a full re-install unless anybody else has heard of this and knows what the problem is.
how can I change via VBA the chart options in tools--> options-->charts
View 4 Replies View RelatedI have a table with rows that keep growing. But I have place formula in the whole of column F, i.e. F2:F66565. When I import information from MS Access into column A to E, the formula in F does not work, until I copy from F2 to the end manually. I have tried using Tools, Options, Calculation, Automatic. That doesn't work, I have also tried F9, that doesn't work and I have also tried checking Precision as Displayed under the calculation tax in Tools-Options, that doesn't work either.
View 3 Replies View RelatedI'm "missing something" here. I used the EOMONTH function in a recently developed workbook. In order to activate that function, I had to go to the Tools menu, select the Add Ins option and add the Analysis Toolpak to my Excel configuration ... no problem, worked like a charm. Then I sent the workbook to another user. Of course, the EOMONTH function came up with errors when she opened it. I talked her through the Tools/AddIns/Analysis Tookpak configuration change ... but could not get the EOMONTH formula to work.
View 5 Replies View RelatedJust discovered the drawing tools on my quick access tool bar are disabled. All were enabled and working fine just yesterday. I'm running 07 on xp. I've shut down and rebooted, no change. Need to know how this could have happened but mostly, how to enable.
I placed an add-in (.xla file) with a " function" and a "sub" into C:Microsoft Office XPOffice10Library. When I go to Tools-->Add-Ins the Add-In doesn't show up. When I browse the file it says it already exists and still doesn't show up. The strange thing is that the "function" does work, but the sub (which is a sub worksheet_change) doesn't run. I also tried doing the steps as they are laid out in http://www.ozgrid.com/VBA/excel-add-in-create.htm and ended up with the same problem. The function works when I open up a brand new Excel application and use Book1, so I know the function isn't embedded in the sheet.
View 4 Replies View RelatedI have installed Excel 2007 but cannot find the tools menu [or tab]? I see tabs like 'Home', 'Insert', 'Formulas', 'Data', etc. but no tools?
View 2 Replies View RelatedWhy when I open some files that have macros and I enable macros on initial opening and then go to tools-macro-macros it's not showing anything there, but when I press Alt F11 then I can see macros?
Is there any way to change this that I can see all macros from tools-macro-macros?
I've created and excel spreadsheet that has code like this in a Module named Print w/ in the workbook:
Sub Print_wsPrint()
Sheets("Print").PrintOut
End Sub
I have saved it as an MS Office Excel add-in.
I added the add-in to my excel environment via Tools, Add ins...and let it copy it to my C:Documents and SettingsjohnApplication DataMicrosoftAddIns directory.
But yet when I create a menu button and assign the Print_wsPrint to a custom menu, it complains and says "The macro Model.xls!Print_wsPrint cannot be found," where Model.xls is the workbook I am in. It's in my add-in, not in the current wb.
VBA code to extract excel report from tools e.g. SAP or other tools.
View 3 Replies View RelatedIs there code available that will hide the Tools Menu within excel?
View 5 Replies View RelatedI want to hide and unhide tool / macros menu so that users don't run the macros in the workbooks.
I am setting up VBA code to create different excel workbooks. One of the differences is in the VBA Tools References that must be enabled to make the whole thing function.
How do I write VBA code to turn on and off specific tool references ie. if i had a reference called OrbitCOM Library how can I turn it on and off using VBA code.
I have a spreadsheet with check boxes and a combo box that are set to display in print preview as well as print. I have set up a Print Preview button on this spreadsheet, as well. When you click the Print Preview button and then click close on the preview window and return to the spreadsheet, the control toolbox tools appear out of place and are greatly magnified. Scrolling the screen down and then back makes them appear correctly once again.
I have seen this on this spreadsheet on three different computers. Does anyone have a clue what is going on?
Note, clicking the print preview button on the standard toolbar does not provide the same artifact. It works correctly.
Or for the cheap fix, what is the VB script to move the cursor to a different cell and then return back?
I can't find anywhere where there may be some VB code to allow text within a cell in Excel to be circled. I don't want drawing objects, because many times I need to modify 30-40 sheets at one time and Excel doesn't allow you to alter drawing objects when you have multiple sheets selected. Therefore, I just want to be able to apply a circle around some text in a cell the same way you would underline it, for example. I figured my only hope is VBScript?
View 9 Replies View Relatedi am preparing my self to enter the microsoft Excel 2003 Exam.....
one of the mentioned points in the preparation list is: (Perform data analysis using automated tools) how to use the automated tools? and if possiable to get a file that i can apply these tools on it
how to change the name of a Command Button that I have called "Command Button" on the Tools menu.
Also if I have this button created in my Personal workbook and I send the file to another user what should I do? Will that user be able to see this button ok?
I have the following data retrieved via import data tools ...
View 9 Replies View RelatedI have a workbook with 8 sheets. I have hidden two of the sheets and want to lock the rest from people editing, and stop them from unhiding the hidden sheets
I go to tools>protection > protect workbook
After typing in the password this doesnt protect the workbook as i am still able to edit the cells.
how to lock the all sheets and stop them from being edited?
I have a workbook in excel 2003 which I had been running the following macros (listed below). We recently upgraded to Excel 07, and neither are working. When I try to run them, the "debug" option highlights the following line in the sort macro "Range("A2:z" & lastcell).Sort key1:=.Columns(1)". This is driving me crazy, as the macros worked perfectly under the older version of Microsoft. Is there an issue with crossfunctionality between '03 and '07'.
Private Sub Worksheet_change(ByVal target As Excel.Range)
If target.Column = 1 Then
ThisRow = target.Row
startRow = 1
i = 1
Set ws = ActiveSheet
maxRow = Cells.SpecialCells(xlLastCell).Row
maxCol = Cells.SpecialCells(xlLastCell).Column
ActiveSheet.UsedRange.Interior.ColorIndex = xlNone
Do While i
I am trying to write a formula with the following:
-if I9=0, then write 0
-if I9=501, then write 1
-if I9=502, then write 2
What would be the best way to write this formula? I am sure this should be pretty basic, but everything I try comes up with an error.
i am currently designing a userform which has a drop-down box for user to choose from the options given. However, i would like to have in the box fields such as "--Subjects", "English", "Maths", "Science". In this way, the user will be shown a list of options of the different subjects for them to choose from as well as to clearly identify to them that these are the subjects available therefore the heading "--Subjects". I would also have to make sure that the user can only select "English", "Maths", "Science" and NOT "--Subjects".
View 11 Replies View RelatedWe have developed an Excel workbook with hundreds of lines of VBA code written for a specific application, and we would like to protect it.
Could someone give me an idea of what security options we have over and above the below (if any)?
We have protected all sheets and the workbook itself with passwords. The VBA itself is protected with a passoword.
My understanding is that VBA can be hacked into quite easily.....is there any way of adding another layer of security/protection without having to move to another platform altogether?
numbers in one column need to be rounded to the nearest half decimal, with next conditions(ill took number 704,00 for example):
- if last two decimals are < 0,25 then my number has to be 704.00
- if last two decimals are >0,25<0,75 then my number has to be 704.50
- and finally if last two decimals are >0,75 then my number has to be 705.00
I tried with IF, CEILING, INT and ROUND functions but i didn't made it work with three options, that i need. I only made it work if i use only two options.
I would like to know how do I go about adding the following:
This is a test it counts out of 1250 points
But there are 3 fields which can be omitted from the grand total of 1250
Some students might not have all three fields. The fields totals are 30, 90 and 130. The students might have one or two of them in either order. Now what I would like to do is have 3 different fields where I can mark with a Y=Yes and N=No in a block. then it would change the Grand Total score accordingly.
How do I filter the options in column A to bring up results in Column B. I want to do a one-many filter where if the user selects an option in column A then the results/values in column B should be based upon the the user selection.
View 9 Replies View RelatedI recently added a macro in excel that stopped users from cutting and pasting and dragging etc. I got the macro from the web. I have delete the macro, but for some reason I cannot get it back to normal. If I right click on a cell the cut, copy, insert, delete, format cell menu is grayed out. The undo button also does not work? I have searched for the macro and deleted it but it seems to have changed something else. I have even tried to disable macros, but all menu items are still gone?
View 9 Replies View RelatedI have a userform that prints out pages using a autofilter, the code in the userform prints out 13 different criterias from the autofilter. But the problem is i have no control over what criteria i can print out. Theres the
ActiveSheet. Unprotect ("seasons")
Sheets("Day Handover").Select
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
Sheets("Activities Pick Sheet").Select
Selection.AutoFilter Field:=1, Criteria1:="1"
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
Selection.AutoFilter Field:=1, Criteria1:="2"
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
Selection.AutoFilter Field:=1, Criteria1:="3"
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
Selection.AutoFilter Field:=1, Criteria1:="4"......................
So i have design another userform that will able me to control what criteria can print out using checkboxes. But i don't know how to code the new userform so when i select a checkbox it removes that criteria from the code in the first userform called 'frmPrintOptions' and when deselect the checkbox it puts the criteria back in the code. Also the Second userform called 'frmAutoPrint' must remember what checkboxes have been selected and deselected.