VBA Code For Extract Report From Tools?

May 1, 2014

VBA code to extract excel report from tools e.g. SAP or other tools.

View 3 Replies


ADVERTISEMENT

Vba Code To Remove The Tools Menu

Sep 2, 2009

Is there code available that will hide the Tools Menu within excel?

View 5 Replies View Related

VBA Code To Change Tools-references

Feb 25, 2008

I am setting up VBA code to create different excel workbooks. One of the differences is in the VBA Tools References that must be enabled to make the whole thing function.

How do I write VBA code to turn on and off specific tool references ie. if i had a reference called OrbitCOM Library how can I turn it on and off using VBA code.

View 9 Replies View Related

Excel 2010 :: VBA Code To Extract HTML Source Code Not Working On Google Sites

Dec 6, 2012

I have previously used the following code to successfully pull out IE webpage source code for string manipulation.

Its a crude example to demonstrate the principle:

Public Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Public IE As Object
Sub Sample()
Set IE = CreateObject("InternetExplorer.Application")
IE.Visible = True

[Code] ......

However when I substitute in a Google websites address into the IE.Navigate command, the code runs to the "Source_Code = IE.document ...." line then flags up a Microsoft Visual Basic error. "Run-time error '438': Object doesn't support this property or method"

The webpage that I am trying to access is a confidential company site, so you won't be able to access it yourself, but starts with [URL] ......

The one thing that I have noticed about this website is the Privacy Report icon in the lower right status window (Picture of an eye with a restricted symbol in front). I don't know whether this is the cause of my problem, or purely an incidental observation.

Is there something peculiar with Google sites that means that the source code cannot be extracted in general, or is this an issue specific to my site ? Does the Privacy Report icon have any relevance, and if so how do I switch that off ?

Using :
MS Excel 2010
IE Explorer 8.0

View 1 Replies View Related

Summary Report Using VB Code

Dec 1, 2006

I have a report that I need to summarize, here is some sample data.

Dealer CodeParticipantModules
F23CH ROB MASSON10
F23CH ROB MASSON7W
F23CH ROB MASSON8
F23CH ROB MASSON9
F32C5 JOHN COUTTS16
F32C5 JOHN COUTTS17
F32C5 JOHN COUTTS21
F32C8 SCOTT PLAKHOLM7
F32C8 SCOTT PLAKHOLM7S
F32C8 SCOTT PLAKHOLM7W
F32C8 SCOTT PLAKHOLM8

Desired results would be column A Dealer Code, Column B Particpant, Column C a summary of Modules taken, Column D a count of Modules

Ex:
F23CH Rob Masson 10,7W,8,9 4
F32c5 John Coutts 16,17,21 3
F32C8 Scott Plakholm 7,7s,7w,8 4

Is there a easy fix using VB code? The report is usually between 1500 lines and 2000.

View 11 Replies View Related

Use VBA Code To Run A Report In Access And Then Save It As PDF?

Jan 13, 2012

Is it possible to use vba code to run a report in Access and then save it as a PDF?

I have a subroutine (well, a combination of subroutines) that copies some data from a spreadsheet into Access.

I then want to be able to run a report based on that data, save it as a PDF and email it out: all automatically.

I don't want the user to have to actually open Access and run the reports, because it's much slower! For some reason Excel can open access, write to tables and close it within a matter of seconds: opening the program manually, editing the table and closing it can take minutes.

View 9 Replies View Related

VBA Code To Connect To BMC Remedy And Fetch Report?

May 9, 2013

I have a requirement to pull report from BMC remedy using VBA. I am sure that many people would have achieved this. .

View 1 Replies View Related

VBA Code To Change Pivot Table (Report Filter) From Userform Textbox / Combobox

Aug 16, 2013

I've prepared an excel file with a pivot table. Now I would like to change the Pivot "Report filter" by using Textbox on Userform. I've attached an excel file as an example.

View 2 Replies View Related

Creating Individual Report Cards (worksheets) Based On Template For Report Card

Aug 30, 2013

I have two worksheets in my report cards:

1) Data - the students are listed in Column A, math scores in Column B, reading scores in Column C and science scores in Column D. The grades of 300 students are entered in this sheet.

Student
Math
Reading
Science

Jimmy
75
84
100

[code].....

2) Report Card template - This is the report card that needs to be generated for each student. It's pulling the student name and grades from the Data worksheet.

Student Name
=Data!$A2

Math
=Data!$B2

Reading
=Data!$C2

Science
=Data!$D2

How do I create worksheets (report cards) for additional students? I have 300 students in the school. I need the next worksheet to reference Data!$A3. I know how to cut and paste the report card template and then edit =Data!A2 to be =Data!A3 to create a report card for Sally. How do I create the 300 report cards I need?

I've been teaching for 13 years. I can create a report card for each student in my class and edit each worksheet individually for each student. Now I've been asked to do this for the whole school and I don't know how to create the other 299 sheets I need.

View 1 Replies View Related

Copy Data From Weekly Report To Monthly Report

Jul 2, 2008

How do you create a macro to copy the information from my weekly reports to a monthly report and be able to update automatically. If you had 4 worksheets (for each week of the month) and 1 mastersheet for the whole month in a workbook. All titles are the same and If you needed to copy all the data that is in the columns, say, A through I, starting with row 4 to however many rows are in a given week. The reports can be made up of numicerial values, text and dates. Let me know if more information is needed or an example worksheet.

View 4 Replies View Related

EOMONTH - Tools / Add Ins

Oct 10, 2008

I'm "missing something" here. I used the EOMONTH function in a recently developed workbook. In order to activate that function, I had to go to the Tools menu, select the Add Ins option and add the Analysis Toolpak to my Excel configuration ... no problem, worked like a charm. Then I sent the workbook to another user. Of course, the EOMONTH function came up with errors when she opened it. I talked her through the Tools/AddIns/Analysis Tookpak configuration change ... but could not get the EOMONTH formula to work.

View 5 Replies View Related

Disabled Tools

Jan 21, 2010

Just discovered the drawing tools on my quick access tool bar are disabled. All were enabled and working fine just yesterday. I'm running 07 on xp. I've shut down and rebooted, no change. Need to know how this could have happened but mostly, how to enable.

View 9 Replies View Related

Set Tools/Options From VBA

Jun 27, 2006

I use several different workbooks during the day, and sometimes I would prefer the " move selection after enter direction" option to = "Right" and sometimes "Down". It doesn't seem to be an option that is saved with the workbook.
what could be done to a workbooks code to change this option upon opening the book?

View 2 Replies View Related

Add-in Not Showing Under Tools | Add-ins

Oct 31, 2006

I placed an add-in (.xla file) with a " function" and a "sub" into C:Microsoft Office XPOffice10Library. When I go to Tools-->Add-Ins the Add-In doesn't show up. When I browse the file it says it already exists and still doesn't show up. The strange thing is that the "function" does work, but the sub (which is a sub worksheet_change) doesn't run. I also tried doing the steps as they are laid out in http://www.ozgrid.com/VBA/excel-add-in-create.htm and ended up with the same problem. The function works when I open up a brand new Excel application and use Book1, so I know the function isn't embedded in the sheet.

View 4 Replies View Related

VB Code To Extract Row Content

Nov 23, 2011

I have a workbook with 2x Worksheets "Data" and "Check"

On the worksheet Data I have a series of Values

Column A = Names
Column B = Cost
Column C = Dpt

I want to create a piece of VB code to extract from the list on the "Data" worksheet, only those lines where, there are 3x occurrences for a Name where Cost = zero

Eg

Data Worksheet Values

A1=JohnS
A2=SimonX
A3=JohnS
A4= JoeF
A5=JoeF
A6=JohnS

[Code]....

Result of ******* macro button with needed code would clear existing values in "Check" worksheet and show

A1=JohnS
B1=0
C1=A1
A2=SamK
B2=0
C2=X7

View 1 Replies View Related

Extract Source Code From .exe

Dec 14, 2006

Is it possible to decode an executable that was written in VBA? Not VBA for excel but just VBA.

View 6 Replies View Related

Cannot Find Tools Menu

Feb 13, 2009

I have installed Excel 2007 but cannot find the tools menu [or tab]? I see tabs like 'Home', 'Insert', 'Formulas', 'Data', etc. but no tools?

View 2 Replies View Related

Macro Not Showing In Tools

Feb 5, 2010

Why when I open some files that have macros and I enable macros on initial opening and then go to tools-macro-macros it's not showing anything there, but when I press Alt F11 then I can see macros?

Is there any way to change this that I can see all macros from tools-macro-macros?

View 9 Replies View Related

Add-in Created; And Added Via Tools, Add-in

Jan 25, 2008

I've created and excel spreadsheet that has code like this in a Module named Print w/ in the workbook:
Sub Print_wsPrint()
Sheets("Print").PrintOut
End Sub

I have saved it as an MS Office Excel add-in.

I added the add-in to my excel environment via Tools, Add ins...and let it copy it to my C:Documents and SettingsjohnApplication DataMicrosoftAddIns directory.

But yet when I create a menu button and assign the Print_wsPrint to a custom menu, it complains and says "The macro Model.xls!Print_wsPrint cannot be found," where Model.xls is the workbook I am in. It's in my add-in, not in the current wb.

View 9 Replies View Related

Tools . Options Not Working

May 2, 2006

When I choose tools -----> options from the menu bar nothing happen I can not changes my options. I am using excel 2000, I must of changes something but I don't not remember what. Can someone help turn back this option

View 9 Replies View Related

Macro Code To Extract From Web Pages

Jun 13, 2008

Can anybody post me some links to automating data extraction from Websites using VBA and IE. Not something I have ever bothered with before. Basically interested in using the controls and pulling tables.

View 4 Replies View Related

Hiding & Unhiding Tools / Macros

Jan 26, 2007

I want to hide and unhide tool / macros menu so that users don't run the macros in the workbooks.

View 9 Replies View Related

Tools & Format Options Cause Freeze

Nov 21, 2006

On one of my computers, Excel is freezing up just about any time I select something from the Tools or Format Menus (same goes if I use keyboard shortcuts to call any of those things). I have to kill it with the task manager. It is not a specific workbook, I've tried several, including new blank workbooks.

It's not all menus, as File options seem to work. I also am able to Autosize columns by double clicking, but basically any other formatting things (i.e. CTRL + 1) do not work. I also tried to show the Cell Format dialog via VBA, (note: I am able to get to VBA editor, etc...), and it locked it up then too.

Finally, I tried "Detect & Repair" from the Office disk, but that didn't do anything. Next, if necessary, I'll do a full re-install unless anybody else has heard of this and knows what the problem is.

View 2 Replies View Related

Code To Extract 4 Right Chars And Paste In Another Column

Oct 27, 2009

I am having problems with a macro I am writing and I need some guidance on where I am going wrong (I am still a noob at VBA).

I have pasted the code below (not the most efficient use of code I know).

I have a list of departments and codes from the Intranet at Work. Now this contains a Department Code, Department Description and within the Description is a number in brackets showing how high up the organisation hierarchy they are....

View 9 Replies View Related

Extract Words From Within Text Of HTML Code?

Nov 5, 2012

Many lines on my sheet have the following text in col B.

****** http-equiv="Content-Type" content="text/html; charset=UTF-8"> ****** name="generator" content="http://www.movabletype.org/"> Church Marketing Sucks: Evangelism & Outreach Archives

Is there a way to extract all the text or words between the and tags and put the extracted text into col D?

View 1 Replies View Related

VBA Print Preview And Control Toolbox Tools

Dec 9, 2008

I have a spreadsheet with check boxes and a combo box that are set to display in print preview as well as print. I have set up a Print Preview button on this spreadsheet, as well. When you click the Print Preview button and then click close on the preview window and return to the spreadsheet, the control toolbox tools appear out of place and are greatly magnified. Scrolling the screen down and then back makes them appear correctly once again.

I have seen this on this spreadsheet on three different computers. Does anyone have a clue what is going on?

Note, clicking the print preview button on the standard toolbar does not provide the same artifact. It works correctly.

Or for the cheap fix, what is the VB script to move the cursor to a different cell and then return back?

View 9 Replies View Related

Circling Text Within A Cell Without Drawing Tools

Mar 10, 2009

I can't find anywhere where there may be some VB code to allow text within a cell in Excel to be circled. I don't want drawing objects, because many times I need to modify 30-40 sheets at one time and Excel doesn't allow you to alter drawing objects when you have multiple sheets selected. Therefore, I just want to be able to apply a circle around some text in a cell the same way you would underline it, for example. I figured my only hope is VBScript?

View 9 Replies View Related

Changing Application Tools Options Chart

May 17, 2006

how can I change via VBA the chart options in tools--> options-->charts

View 4 Replies View Related

Perform Data Analysis Using Automated Tools

Oct 4, 2006

i am preparing my self to enter the microsoft Excel 2003 Exam.....

one of the mentioned points in the preparation list is: (Perform data analysis using automated tools) how to use the automated tools? and if possiable to get a file that i can apply these tools on it

View 2 Replies View Related

Assigning A Name To A Custom Button On The Tools Menu

Apr 3, 2007

how to change the name of a Command Button that I have called "Command Button" on the Tools menu.

Also if I have this button created in my Personal workbook and I send the file to another user what should I do? Will that user be able to see this button ok?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved