I have a worksheet where I would like to transpose the 3 columns into 1 row.
I would to change
ID
NUMBER
DATE
[Code]....
into
950 9.8 01/01/1992 950 6.34 01/01/2002 950 5.43 01/06/2002 950 6.76 01/09/2002 950 7.44 01/01/2003 etc...
This worksheet has 5413 rows with different ID's and it is attached : Columns to row.xlsx
This is a snippit of my table1000 employees)
Benefit Emp1#Emp2#Emp3# ... ...
Earnings Pay34885.3541553.5825012.36
Health Insurance4317.0304317.03
[Code].....
A code to transpose from rows to columns.
But why doesn't it transpose like the sheet 'How it should be' but all in one row?
HTML Code:
Sub MG10Jun34()
Dim Rng As Range
Dim Dn As Range
Dim c As Long
Application.ScreenUpdating = False
[Code] .......
I'm working on this project that I inherited from another colleague and am at a sticking point. The workbook is used to determine which employees are working on which projects what pct of the time. The workbook was set up using a start and end date (columns e and f) for the projects instead of a column with the month and the correct percentage. I've set up monthly columns, which are now in columns K through AF. I believe that I need to transpose those columns into a row so that I can set up a pivot table.
View 5 Replies View RelatedUsing the formula =E+1 will produce a sequential list when copied down. Changing to E+2 produces a list that increases by 2 in each row.
I am looking for a formula that will give me a list of column references that increase by 2 . If the first row is row "F" the next row will be "H" then "J" and so on.
Something like =E+(columnF+2).
I have 19 rows of data spanning 184 columns, and I'm attempting to transpose them to be 19 columns and 184 rows, which would normally be easy. The problem is I need to be able to transpose the numbers while still keeping the formulas on a separate worksheet linking/connecting to the correct cells. I almost need to be able to cut/special paste - transpose, but that's not possible... I don't think.
View 3 Replies View RelatedI have some sales history data for products which I need in one row. Each product has 4 rows x 12 columns (months) of data under each other. I need the 48 months of data in one row per product. A sample of the type of data I have is below (product A) along with the expected result. In the real data there would be many products not just one as per my example.
Sheet1 *ABCDEFGHIJKLMNOPQRSTUVWXYZAAABACADAEAFAGAHAIAJAKALAMANAOAPAQARASATAUAVAW1
Sample Data
[Code] .......
how transpose my 4 Colunas to 1 Row
Before:
Data1
Data2
Data3
Data4
[Code]...
how do i transpose from rows to columns
i have 545 names with addresses
Sheet1 GH221name23 adress line124 adress line225 phone26 fax272name28 adress line129 adress line230 phone31 fax323name33 adress line134 adress line235 phone36 fax37 city384name39 fax40 city Excel tables to the web >> Excel Jeanie HTML 4
selecting each block of name+address is tedious --how can i do it in one go
also the number of rows varies in each block -- at places there are 4 rows at other places 3 rows and so on
How do I transpose as shown below?
I have to columns of data, Site number and Disc number. I have sorted by unique site number but I don't know how to transpose the data.
******** ******************** ************************************************************************>Microsoft Excel - testing.xls___Running: xl2000 : OS = Windows Windows 2000 (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=
ABCDEF1SiteDisc****210123****310124****4101222****5103111****6109125****7109126****8109129****9109189****10109222****11******12******13SiteDisc1Disc2Disc3Disc4Disc5141012324222**15103111****16109125126129189222Sheet1*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have some summary results stated in row format by GL at the row header. I would like the GL to be the column header and the unit to be the row header. I tried using the index function but keep receiving #VALUE! error. Sample attached.
View 3 Replies View Relatedrefer to the attached file. I have series of continuous data which is numbered from 1 to 100. They are arranged in vertical order. Due to some application, i need to convert them into another sheet so that they can be viewed horizontally. I used HLOOKUP to obtain the data from sheet 1. Now i have only 17 groups of data and i still have 83 more data to be input in the future. Is there any VBA code that can help me "extend" the equation in sheet2 so that whenever i key in the data in sheet1, the corresponding data will be generated automatically in sheet2?
View 3 Replies View Relatedfollowing is code for search in the sheet and give result in other sheet
Private Sub Searchbton_Click() 'Serach button click
'for search
Dim a(), r As Range, res, i As Long, ff As String, rng As Range
Dim title
title = Array("Sr.No", "File#", "Client File#", "Client", "State", "Borrower's Name", " Date Received", "Date & Time File Started", "Title Ordered on", "Type of Search Ordered", "Title Follow up Date", "Title Received on", "File Completed on", "Date & Time E-Mail Sent to Client", "Status", "File Canceled Date", "Remarks", "Done by")
res = Application.WorksheetFunction.Substitute(Me.TextBox1, "-", "")
If Len(res) = 0 Then..........
Problem is when we search for any data and if the recorded data exceeds 307 or more rows, the result will not show the data beyond 307 & more. it take to the Error : Run-time error '13' :Type mismatch error and cursor goto:
.Offset(1).Resize(UBound(a, 2), UBound(a, 1)).Value = Application.Transpose(a)"
transposing columns and rows in an Excel worksheet. This data is a table of part numbers requested vs. received over several different days. Currently, the data is sorted by date across the columns, and each date is split into two columns for requested and received. The rows are labeled with the individual part numbers.
I would like to format the data so that the part numbers appear as the column label, and each part number label is split into two columns for requested and received. Also, the date would then signify the date of each value in the table. I have attempted to use the transpose command, but this only gets me half-way there - still struggling with the splitting of the columns. I can drag a simple "= CELL" command, but the existing data is too cumbersome to build this. I thought a macro might be more efficient.
The file attached is a snap-shot of the data, but will display the formatting challenge I have. The worksheet "Given Format" is the current, while the "Desired Format" is the desired.
I want to transpose the phone number and website over where the name is? I know I can do a copy and paste special and transpose but then I have do it individuallly and I have over thousands rows.I have attached an example.
View 3 Replies View RelatedThis is a snippit of my table1000 employees) ...
View 4 Replies View RelatedI have following information. I need to transpose the columns into rows
C
10001
V
1000
V
1001
V
1002
C
10002
V
1001
V
1003
C
10003
V
1001
V
1003
V
1004
The expected result should be like
10001 1000 1001 1002
10002 1001 1003
10003 1001 1003 1004
I have an problem transposing multiple columns into a table. Source data is organized in 3 columns - ID, Visit#, Date. What I need is a seet in which I'd have in Column A - and ID, in Row 1 a Visit type and Visit date would be populated in the table. See attached file. Since I'm handling about 50k datapoints a simple "paste special--->transpose" is a nightmare.
View 5 Replies View RelatedI am trying to clean up some data, which is organized horizantally AND in rows, as per the attached screenshot.
The fact that there is data horizontally across seven week days and in rows for the weeks of the year makes it impossible for me to use the simple TRANSPOSE feature, of which I am aware...
I have quite a couple of worksheets I need to apply this operation on, so manual work is the worst solution...
I have an excel spreadsheet which contains data for customers and the last date they were seen at an appointment (along with various other bits of info).
The way the data is exported from my database package means that each customer has one row per appointment, i.e. row 1 contains john smith, 01/01/2009, row 2 contains john smith, 03/03/2009, row 3 contains john smith 01/04/2009, row 4 contains joe bloggs 12/02/2009, row 5 contains joe bloggs 27/03/2009. Some customers may have 4 or 5 appointments listed whereas another customer may only have one. I need to get the appointments all onto one row per customer so that I can calculate the number of days between appointments. I have tried to use transpose, but with 8000 rows it takes forever.
I am having months JAN TO DEC In sheet 1 in columns A1,B1,C1, and so on
I want to transpose them to Rows in sheet 2 , how do i this using transpose function in vba code.
Before
XYZ1
XYZ2
XYZ3
XYZ4
XYZ5
XYZ6
XYZ7
After
XXXXXXXYYYYYYYZZZZZZZ1234567
[Code] .....
I have Excel 2007 and a two column lexicon in the following format:
word1 ; word_a
word1 ; word_b
word2 ; word_c
word2 ; word_d
word2 ; word_e
word3 ; word_f
would it somehow be possible to transpose it to:
word1 ; word_a ; word_b
word2 ; word_c ; word_d ; word_e
word3 ; word_f
We have to copy from lot of Java webpages
1. Data of single column 3 rows of data to First blank cell in 'C' column (say C6)
2. Then Transpose it across to the same row into 3 columns (from same C6 to d6 & e6)
Here I tried some VBA but needs how to put it across....
I am trying to transpose 1 column into 3 columns:
Example:
1
2
3
4
5
6
7
8
9
ect...
into
123
456
789
ect...
Here is the code I have:...................
I need to move data stored in column A to columns B and C, then skip 3 blank lines and perform the operation again. The attachment shows a before and after example. I'm very much a novice.
View 3 Replies View RelatedI need to combine data in 5 columns into 1 column as below. The columns to be merged are always identical in length up 20 000 lines.(Full example attached)
Raw data in columns A,B,C,D,E as below
A1 B1 C1 D1 E1
A2 B2 C2 D2 E2
Converted should be
A1
B1
C1
D1
E1
A2
B2
C2
D2
E2
This is a sample of the attached workbook.
Project
Task
Current Phase
Start Date
Planned Finish
Status
[Code]...
What I am trying to do is break up the "Phase" column into several columns, where each phase would have its own column. Something like this:
Phases
->
->
->
->
->
Project
Task
01.
02.
[Code]...
It is very important that the output of the data goes on a new sheet, and that the records maintain integrity.
I am working on a =transpose function. Pretty simple right? Well now I am trying to have it SKIP/SELECT certain columns.
I have =transpose("date!B1:T1"), but now I want to "Select A,B,D,E,F"
=TRANSPOSE(INDIRECT("date!B1:T1"),"select A,B,D,E,F,G,H,P,Q,R,S,T")
I am struggling with an Excel Database, to make it "cleaner". Here is my problem. My database looks something like that:
Column A Column B Column C ... Column H
ID Age Date of Birth ... Language
00001 14 01/01/2000 ... English
00001 14 01/01/2000 ... French
00002 14 01/01/2000 ... English
00003 14 01/01/2000 ... French
00003 14 01/01/2000 ... German
00001 14 01/01/2000 ... Spanish
Basically, Columns B & C will never change for the same ID, but columns G, H and others contain data that is different from one row to the other. What i wwould like to do is having unique values in Rows, with Languages displayed in Columns. The database would look like this:
Column A Column B Column C ... Column H Column I Column J
ID Age Date of Birth ... Language 1 Language 2 Language 3
00001 14 01/01/2000 ... English French Spanish
00002 14 01/01/2000 ... English
00003 14 01/01/2000 ... French German
The challenge is that I would need this to be done with formulas only, not using any kind of code. Deleting duplicates manually after "cleaning" the database should'nt be a problem. I tried a formula found on this forum, but i couldn't manage to make it work. The formula looked like this:
{=IFERROR(INDEX($C$4:$C$8;SMALL(IF(FREQUENCY(MATCH($C$4:$C$8;$C$4:$C$8;0);MATCH($C$4:$C$8;$C$4:$C$8;0));ROW($C$4:$C$8)-ROW($C$4)+1);ROWS(C$16:C17)));"")}