Macro: Transpose 1 Column Into 3 Columns

Aug 24, 2006

I am trying to transpose 1 column into 3 columns:

Example:
1
2
3
4
5
6
7
8
9
ect...

into

123
456
789
ect...

Here is the code I have:...................

View 4 Replies


ADVERTISEMENT

Macro To Transpose Data From One Column To Several Columns In Steps?

Jan 25, 2013

I am looking for a macro that works like the ASAP Utility (Transpose data from one column to several columns in steps). To elaborate the work done by the macro it should transpose the values in a column to the number of steps that is user defined (Using InputBox) that is if there are 103 values in the column and the user enters the number of steps as 24 then the macro should transpose the data up to 24 columns and the rest in the next row up to 24 columns and so on unless the complete data is transposed.

For more clarity refer the attached excel sheet or the "Transpose data from one column to several columns in steps" utility of ASAP Utility.

View 3 Replies View Related

Transpose Each Row Of X Columns Into Single Column

Apr 27, 2008

I need to combine data in 5 columns into 1 column as below. The columns to be merged are always identical in length up 20 000 lines.(Full example attached)
Raw data in columns A,B,C,D,E as below

A1 B1 C1 D1 E1
A2 B2 C2 D2 E2
Converted should be
A1
B1
C1
D1
E1
A2
B2
C2
D2
E2

View 7 Replies View Related

How To Transpose A (table) Column Into Multiple Columns

Jul 10, 2012

This is a sample of the attached workbook.

Project
Task
Current Phase
Start Date
Planned Finish
Status

[Code]...

What I am trying to do is break up the "Phase" column into several columns, where each phase would have its own column. Something like this:

Phases
->
->
->
->
->
Project
Task
01.
02.

[Code]...

It is very important that the output of the data goes on a new sheet, and that the records maintain integrity.

View 3 Replies View Related

Transpose Column To Rows - Referencing Columns By Number

Jun 19, 2012

I'm trying to create a macro that transposes data from columns to rows.

My source data is laid out so Column A and B contain item identifiers, and then the header for Column C to Column S contain dates (March, April, May, etc) and the row data below contains quantities for each month. This is on Sheet1.

I need my end data (on Sheet2) to have the item detail in Column A and B, the quantity in Column C and the Date in Column D. If there is a date that has no quantity then it should be skipped.

Sample Source Data (Pipes added for clarity, they aren't in the actual data)

Part |Description |June 4 |June 11 |June 18
A | PartA | 5 | | 12
(Please note June 11 has no quantity)

Sample Destination Data:

A | Part A | 5 | June 4
A | Part A | 12| June 18

Below is the start of the code, obviously I have a ways to go before it's fully functional but hopefully you get the idea how I'm trying to attempt this. Where I'm having issues right now is referencing columns by number. Is there a way to do this so I can do Column = Column + 1 to advance columns to the right? Or any better way to address this all together?

HTML Code:
Sub ConvertToRows()
Dim ReviewRow, ReviewRowEnd, PasteRow, ColumnNumber As Integer
ReviewRow = 2

[Code]....

View 1 Replies View Related

Excel 2007 :: Macro To Transpose Two Columns

May 30, 2012

I have a file with 2 columns (A=headers, B=values x 38K rows) and need to transpose them to rows.

I found code to transpose a specified number of rows in a column (i.e. every 5th row in the column)...

BUT my columns have variable numbers of data points, because in the exported file any head with a null value was excluded.

So I need to start new rows with a specific text value of "Username" occurs in column A.

View 2 Replies View Related

Macro To Copy / Transpose And Paste Columns To Rows

May 1, 2013

I'm trying to get a macro together that will take a set of workbooks that I've merged (using Ron de Bruin's RDBMerge add-in) and transpose all columns from B to HB into rows. Now, I know that each spreadsheet is 210 columns and 244 rows large and they are concatenated on one another. Attached is a brief example of what I am trying to go from and what I am trying to get to.

View 1 Replies View Related

Changing Existing Macro To Transpose Rows To Columns

Feb 22, 2008

I have the following macro which I use to transpose a number of columns in one sheet to rows in another sheet.

PHP
Subtask1()DimiAsInteger,nAsLongFori=5ToColumns.CountStep2n=n+1WithSheets("Working_Checklist_1").Cells(10,i).Resize(16)Sheets("Summary_Intermediate").Cells(n+2,"c").Resize(.Columns.Count,.Rows.Count)_.FormulaArray="=if(transpose(Working_Checklist_1!"&.Address&")=0,"""",transpose(Working_Checklist_1!"&.Address&"))"EndWithNextEndSub

I'd like to change this macro so to transpose from rows to columns. I've tried a couple of things, but can't quite get it to work.

I'd like to transpose every second cell starting from E7 to IV7 in Working_Checklist into column BU in Summary_Intermediate, starting from BU3.

View 9 Replies View Related

Macro To Recognize Content Between Two Fixed Values And Transpose To Columns?

Oct 26, 2012

I have a long (190,000) list of customer data, all in Column A (unfortunately with blank rows among it, but working now to fix that).

Down the column, individual customers are bookended by a "adf" and a "/adf". (these have open and close brackets like HTML code, but I cannot reproduce them in this forum).

For each customer, I need to find the rows that begin with (brackets spelled out since I do not know how to show them):

1. [open bracket] vehicle status

2. name part=3D"first"[close bracket]

3. [open bracket]name part=3D"last"[close bracket]

4. [open bracket]email[close bracket]

5.[open bracket]phone time=3D

6.[open bracket] name part=3D

And transpose only those rows it into columns.There is a dynamic number of rows for each customer, so there's no way to simply count and transpose, as the columns would all be mis-entered.Somehow it needs to recognize those 6 row items, and transpose those values only, with the and the only telltale of a start and finish of a specific customer.

EDIT: How about a macro to delete all rows except those that contain those partial values above?

View 3 Replies View Related

Vb Code Macro Needed To Transpose Data From Columns To Rows

Oct 14, 2008

i have the following spreadsheet with dummy data however, there is a before and after scenario i have posted is this possible with a macro ...

View 9 Replies View Related

Transpose Multiple Columns To Rows Based On Match Via Macro Or Formula

Jul 10, 2008

I have two columns of data as follows:


10:57:42 273
10:57:42 263
10:57:42 253
10:57:42 241
10:57:37 273
10:57:37 243
10:57:37 249
10:57:37 261
10:57:37 253
11:04:47 241
11:04:47 253
11:04:47 263
10:54:31 254
10:54:31 240
10:54:31 265.......

View 9 Replies View Related

Transpose Data With Macro And Add One Column

Feb 18, 2014

I got to transpose the data from sheet "Data" into new sheet "Actual". Now One row has been added on the top (R1) to categorize the whole data in terms of Major and minor.

modify the macro which add one column (K) with header as "Error type" in sheet "Actual" and then display the above two parameters.

I want exact type of data in sheet "Actual" from raw data sheet "Data"

View 3 Replies View Related

MACRO To Copy And Transpose Data In A Column

Oct 5, 2011

Im trying to create a Macro which can do the following: Go to the selected cell when Macro is run, keep going down cell by cell until it finds a blank cell, select the values, copy them and paste them by transposing into the cell next to where it started from in a row, carry on doing this procedure and pasting the transposed values next to the first non blank value until it gets to the end of this column.

View 4 Replies View Related

Transpose Macro Varying Rows From 1 Column

Aug 22, 2009

I've trawled a few forums for a while now trying to find a macro that matches my specifications, or one I can adapt but so far have been unsuccessful, so here goes:

I have one column of data (col. A) of customer names and addresses each with an empty row in between them. The lines of data relating to each customer vary from 6 rows to 14 rows, then an empty row, then the next customer and so on - for several thousand rows.

I am wanting to create a macro that will transpose each customer to either their own row in sheet2, or to column B and then delete column A at the end.

All I can find is macros for a specific number of rows rather than varying. One way would be to have a code that 'pads' out those customers with fewer than 14 lines by inserting rows to make them 14, and then a code to transpose 15 rows at a time.

View 9 Replies View Related

Creating Macro To Transpose Column Data To Rows

May 22, 2012

How to create a macro to transpose rainfall data (in a column) into rows.

I have over 7200 years of data so using paste special will be very slow.

I have attached a sample of the spreadsheet below.

YearMonthRainfallYEARJANFEBMARAPRMAYJUNJULAUGSEPOCTNOVDEC
11105.5841126.1212131.72131412.0541514.15451646.6716179.75571824.4838193.
25291105.931011131.1781111231.943122161.0321322109.9142324.751152416.501162512.
164172613.222182787.3719285.5202931.944212104.019222111.1642321221.049243117.

[Code] ..........

View 6 Replies View Related

Macro To Transpose Multiple Data In Cell Separated By Commas To Each Data In Column

Jul 15, 2014

I have a table in the format below with about 3500 rows

Column A
Column B

0001
All vehicles, Retirements

0002
All vehicles, Retirements, Addition

0003
All vehicles, Retirements, Addition, Deletion from Y

I would like to change it to the following format:

Column A
Column B

0001
All vehicles

0001
Retirements

0002
All vehicles

0002
Retirements

0002
Addition

0003
All vehicles

0003
Retirements

0003
Addition

0003
Deletion from Y

View 3 Replies View Related

Transpose 3 Columns To 1 Row?

Nov 21, 2012

I have a worksheet where I would like to transpose the 3 columns into 1 row.

I would to change
ID
NUMBER
DATE

[Code]....

into

950 9.8 01/01/1992 950 6.34 01/01/2002 950 5.43 01/06/2002 950 6.76 01/09/2002 950 7.44 01/01/2003 etc...

This worksheet has 5413 rows with different ID's and it is attached : Columns to row.xlsx

View 2 Replies View Related

Transpose Multiple Columns To One?

Feb 22, 2008

This is a snippit of my table1000 employees)

Benefit Emp1#Emp2#Emp3# ... ...
Earnings Pay34885.3541553.5825012.36
Health Insurance4317.0304317.03

[Code].....

View 6 Replies View Related

Transpose From Rows To Columns

Jun 10, 2014

A code to transpose from rows to columns.

But why doesn't it transpose like the sheet 'How it should be' but all in one row?

HTML Code: 

Sub MG10Jun34()
Dim Rng As Range
Dim Dn As Range
Dim c As Long
Application.ScreenUpdating = False

[Code] .......

View 2 Replies View Related

Transpose Several Columns Of Data

Aug 26, 2009

I'm working on this project that I inherited from another colleague and am at a sticking point. The workbook is used to determine which employees are working on which projects what pct of the time. The workbook was set up using a start and end date (columns e and f) for the projects instead of a column with the month and the correct percentage. I've set up monthly columns, which are now in columns K through AF. I believe that I need to transpose those columns into a row so that I can set up a pivot table.

View 5 Replies View Related

Transpose Row Formula To Columns

Nov 29, 2009

Using the formula =E+1 will produce a sequential list when copied down. Changing to E+2 produces a list that increases by 2 in each row.

I am looking for a formula that will give me a list of column references that increase by 2 . If the first row is row "F" the next row will be "H" then "J" and so on.

Something like =E+(columnF+2).

View 10 Replies View Related

Transpose Rows To Columns?

Sep 26, 2013

I have 19 rows of data spanning 184 columns, and I'm attempting to transpose them to be 19 columns and 184 rows, which would normally be easy. The problem is I need to be able to transpose the numbers while still keeping the formulas on a separate worksheet linking/connecting to the correct cells. I almost need to be able to cut/special paste - transpose, but that's not possible... I don't think.

View 3 Replies View Related

Transpose Columns To Rows

Nov 5, 2011

I have some sales history data for products which I need in one row. Each product has 4 rows x 12 columns (months) of data under each other. I need the 48 months of data in one row per product. A sample of the type of data I have is below (product A) along with the expected result. In the real data there would be many products not just one as per my example.

Sheet1 *ABCDEFGHIJKLMNOPQRSTUVWXYZAAABACADAEAFAGAHAIAJAKALAMANAOAPAQARASATAUAVAW1
Sample Data

[Code] .......

View 6 Replies View Related

Transpose Columns Into Rows

May 17, 2013

how transpose my 4 Colunas to 1 Row

Before:

Data1
Data2
Data3
Data4

[Code]...

View 7 Replies View Related

Transpose From Rows To Columns

Dec 18, 2007

how do i transpose from rows to columns
i have 545 names with addresses
Sheet1 GH221name23 adress line124 adress line225 phone26 fax272name28 adress line129 adress line230 phone31 fax323name33 adress line134 adress line235 phone36 fax37 city384name39 fax40 city Excel tables to the web >> Excel Jeanie HTML 4

selecting each block of name+address is tedious --how can i do it in one go
also the number of rows varies in each block -- at places there are 4 rows at other places 3 rows and so on

View 9 Replies View Related

Group And Transpose Columns

Apr 6, 2004

How do I transpose as shown below?
I have to columns of data, Site number and Disc number. I have sorted by unique site number but I don't know how to transpose the data.

******** ******************** ************************************************************************>Microsoft Excel - testing.xls___Running: xl2000 : OS = Windows Windows 2000 (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=
ABCDEF1SiteDisc****210123****310124****4101222****5103111****6109125****7109126****8109129****9109189****10109222****11******12******13SiteDisc1Disc2Disc3Disc4Disc5141012324222**15103111****16109125126129189222Sheet1*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

View 9 Replies View Related

Transpose Rows To Columns

Oct 3, 2006

I have some summary results stated in row format by GL at the row header. I would like the GL to be the column header and the unit to be the row header. I tried using the index function but keep receiving #VALUE! error. Sample attached.

View 3 Replies View Related

Transpose Columns To Rows

Nov 17, 2006

refer to the attached file. I have series of continuous data which is numbered from 1 to 100. They are arranged in vertical order. Due to some application, i need to convert them into another sheet so that they can be viewed horizontally. I used HLOOKUP to obtain the data from sheet 1. Now i have only 17 groups of data and i still have 83 more data to be input in the future. Is there any VBA code that can help me "extend" the equation in sheet2 so that whenever i key in the data in sheet1, the corresponding data will be generated automatically in sheet2?

View 3 Replies View Related

Transpose Array Across Columns

Jan 9, 2007

following is code for search in the sheet and give result in other sheet

Private Sub Searchbton_Click() 'Serach button click
'for search
Dim a(), r As Range, res, i As Long, ff As String, rng As Range
Dim title
title = Array("Sr.No", "File#", "Client File#", "Client", "State", "Borrower's Name", " Date Received", "Date & Time File Started", "Title Ordered on", "Type of Search Ordered", "Title Follow up Date", "Title Received on", "File Completed on", "Date & Time E-Mail Sent to Client", "Status", "File Canceled Date", "Remarks", "Done by")
res = Application.WorksheetFunction.Substitute(Me.TextBox1, "-", "")
If Len(res) = 0 Then..........

Problem is when we search for any data and if the recorded data exceeds 307 or more rows, the result will not show the data beyond 307 & more. it take to the Error : Run-time error '13' :Type mismatch error and cursor goto:

.Offset(1).Resize(UBound(a, 2), UBound(a, 1)).Value = Application.Transpose(a)"

View 6 Replies View Related

Transpose Columns And Rows

Jun 25, 2007

transposing columns and rows in an Excel worksheet. This data is a table of part numbers requested vs. received over several different days. Currently, the data is sorted by date across the columns, and each date is split into two columns for requested and received. The rows are labeled with the individual part numbers.

I would like to format the data so that the part numbers appear as the column label, and each part number label is split into two columns for requested and received. Also, the date would then signify the date of each value in the table. I have attempted to use the transpose command, but this only gets me half-way there - still struggling with the splitting of the columns. I can drag a simple "= CELL" command, but the existing data is too cumbersome to build this. I thought a macro might be more efficient.

The file attached is a snap-shot of the data, but will display the formatting challenge I have. The worksheet "Given Format" is the current, while the "Desired Format" is the desired.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved