I have 3 variables right now...
Dim celadr As Range
Dim cLetter As String
Dim avgRow As Integer
and one line of code reads:
celadr = Range(ColumnLetter(LastScoreColumn) & avgRow)
When I mouseover columnletter it shows "H" and when i mouseover avgRow it shows "2"... this info is right but I think the problem may be trying to combine a string and an integer value as a range. How can I do this so that celadr is the range H2?
I want to define the range from a given cell and all data below within the same column strDataStart is the named cell in the worksheet that want to start from. Below is what I tried and failed.
Function rngDataCol(strDataStart As String) As Range
Dim rngDataEnd As Range
rngDataEnd = Range("strDataStart").End(xlDown)
rngDataCol = Range(Range("strDataStart").Address, rngDataEnd.Address)
End Function
I am trying to define my variables with a for loop and if I run the code to the line after the first variable is defined, it shows that the variable is equal to the appropriate value, but after the for loop is done all of the variables are empty.
[Code] ......
i,d like to define variables,
a=2,7
i<j<k,m<n
5*a+10=i+j+k+m+n
i,j,k is defined in the process (i,j,k are three elements of a,a+1,a+2,a+3,a+4)
how do i define m,n.(two elements of a,a+1,a+2,a+3,a+4)
I am trying to create a correlation matrix that uses the =ADDRESS function to define the various columns of data which I want to correlate against each other (I require this flexibility because the number of columns and rows of data to be correlated will change). The basic formula I am using is something like the following: =CORREL((ADDRESS(Sheet1!$C$2+3,L2+2,,,"Sheet1")),(ADDRESS(Sheet1!$B$2,L2+2,,,"Sheet1")))
However, while the individual ADDRESS fomulas deliver the correct start and end cell references required, it seems that CORREL function won't accept the cell addresses that result from using the =ADDRESS function.
Code to loop through worksheets 1 to 3 only and perform a certain task, and how to define the variables i.e. worksheets 1 to 3 when I am not using actual sheet numbers, but tab names. (worksheet 1 to 3 is just the positionof each tab).
What i need the code to do is perform a task on the first sheet, loop to the next sheet, perform the same task, until it has done the 3rd sheet.
I can't quite get this formula to give me the correct value.
imgur: the simple image sharer
I tried defining as a Range and I can't get it to work right either way. When I hover over my r1 and r2 values the range is correct but it does have "$A$227:$A$447" quotes around the range so I think that is messing me up.
I need it to cycle through whole numbers for three variables whose range I can define. I need this macro to test the result of all possible combinations of A, B and C, as is shown in the attached file. The initial range boundaries for each variable are as follows:
VariableABC
Minimum1408
Maximum510012
So the macro should start with the following combination (1,40,8) then (2,40,8) then (3,40,8) etc until it reaches (5,100,12). I need the results for each combination to be posted at a separate sheet next to the corresponding combination.
I'm trying to Hyperlink my documents to a folder and file name specified by different cells in my workbook
Or essentially, I'm trying to go from this...
I've been trying to use combo boxes to open, then copy and paste information from specific worksheets the user requests. So far, my approach has been unsuccessful --and the suggestion to simply use the GetOpenFiles procedure was helpful but failed to address more than the "open files" part of my application. Can variables be part of an excel file address as I've tried to use them in the "strFile =" statement immediately below?
Public strFile As String
Public strSheet As String
Public strSheetName As String
strFile = "D:Documents and SettingsmccaralDesktopMP2 MONTHLY FINANCIALS_
15_FINANCIALS" _ & strSubtask + "-" + strSubelement + "2007" + strMonth + ".xls"
strSheet = "Task Order" & strSubtask & "-" & strSubelement
strSheetName = strSubtask & "-" & strSubelement
Workbooks.Open Filename:=strFile
Sheets(strSheet).Select Range("A1:P15").Select
Selection.Copy...................................
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
i need to define a cell as text. How can this be done? The reason for this is because if I type 001 in a cell it will automatically turn that into 1. Also this formatting would need to be copyable. So if I copy and paste that cell template and put in say 002 it would still read 002
View 8 Replies View RelatedI record this for retrieving some data from the web for a particular page
With ActiveSheet.QueryTables.Add(Connection:= _
"URL;http://www.emiratesauction.ae/en/cars/OnlineAuction.aspx", Destination:= _
Range("$A$1"))
how I can make the URL be something in a particular cell on Sheet2 - cell B1?
is there a simple way to do a vlookup (or any other more appropriate formula) using the value of another cell to define the named range relevant to that lookup.
eg I will have two different ranges for fitness performance levels, each of these will be named "Male" and "Female".
I would like to do a lookup based on a formula as follows: Try this formula. Column letter & Row number are for example only. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas Z100 =vlookup(D4,NAMED RANGE,2,false)
the Named range would be a value in the same row ie B4 - being Male or Female
so I am hoping for something like Try this formula. Column letter & Row number are for example only. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas Z100 =vlookup(D4,B4.Value,2,false)
otherwise I could just use an If and do something like: Try this formula. Column letter & Row number are for example only. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas).
Many more Excel Formulas Z100 =if(B4="Male",vlookup(D4,Male,2,false),vlookup(D4,Female,2,false) )
I'm trying to create a drop down list that will define the name of the cell so I can reference it in formulas or codings to change the format of various cells defined by a specific name.
I'm not even sure if I can have multiple cells defined as the same name
I'll be inputting data into cells, and I want the color of the cell to change depending if the data is one of these criteria: 'In Service', 'In Transit', or 'Must Purchase'. I can't just make separate criteria columns to list all the data, because the data is already placed in a specific order. So I want whoever is viewing this to know which entry fits which criteria from the color of the cell.
The only thing I could think of is inputting the cell data value, and a drop down menu to define the cell name. I'll input a conditional formatting function to format based on the defined name criteria.
How can I define a range, only for the active cell?
View 6 Replies View RelatedI have the following function and cannot get the "cut/paste" section to work (After sOp = "Look at timestamp and determine which entry is newer".
Code:
Sub DeleteDuplicate(WSName As String)
On Error GoTo ErrorHandler
Dim sOp As String
[Code]....
The way I have try to define lastcell is wrong. But I don't know how to do it.
Code:
Sub createUniqueRecordID_2()
'
' fill using CTRL + ENTER
'
Dim lastcell
Sheets("projects list").Select
[a1].Select
[Code]...
I'm having trouble assigning a range of a single cell using vba. I'm doing this to create charts. Here's the sub containing the problem
Private Sub AddNewSeries(Target As CTarget)
Dim i As Integer
Dim Match As Boolean
Dim rValid, rInvalid As Range
i = 2
Match = False
Do While Match = False
If Sheets("Graph Data").Cells(1, i) = ReportTargetBox.value Then
Match = True
MsgBox ("report name match")
Exit Do
Else: i = i + 1
End If
Loop.....................
This msg box :MsgBox ("Cell Value = " & Sheets("Graph Data").Cells(2, i).value) is working and returning the correct value.
I have a range staring with cell "A5" and going to Column "K8+" that I need to copy. My issue is that the number of rows to copy will change. I have the number stored a variable "a" in my coding. how do I code this to work?
View 5 Replies View RelatedI am trying to find a way to display text that is the product of a concatenate function in a defined cell, but not to have the function itself in that cell. Basically, I want to have the below function in cell A1. I want to add a command to it to take the result and display it in cell A2.
=CONCATENATE(C5,"_",'Attachment 3-A'!C9:E9,"_",IF(C5="","",IF(C6="MPL",IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Lease","Lease_Contributable",
IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Pre-Lease","Managed_Pre-Lease",
IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Non-Contributable","Managed_Non-Contributable","Error"))),
IF(VLOOKUP(C5,Sale!B:F,5,FALSE)="Assignable","Lease_Assignable","Managed_Non-Assignable"))))
The reason for this is that I need the cell to be selectable (it is generating a file name that needs to be selected and copied), but I don't want the code behind it to be seen. I can't find a way to make the cell selectable AND hide the formula from being seen when the cell is selected. This is because our people keep copying the formula rather than the resulting text.
I was hoping for something like a DISPLAYIN(target) function, but it doesn't seem to exist.
I would Like to define each row in a spreadsheet to the value of the first cell in each row and I have no idea how to go about this.
Code Customer
_0888 Williams
_0435 Smith
So basiclally I would like to name the first row "_0888" being 2:2. But without doing each row manually via Insert --> Names --> Define..
= IF(AND(MATCH($B8, [AXS.xls]Sheet1!$E$1:$E$400,0) - 2 = $C8,
INDEX([AXS.xls]Sheet1!$B$1:$B$400, MATCH(CX$2, INDEX([AXS.xls]Sheet1!$B:$B, $C8 + 16):INDEX([AXS.xls]Sheet1!$B:$B, $C9), 0) ) ),
INDEX([AXS.xls]Sheet1!$A$1:$E$400, MATCH(CX$2, INDEX([AXS.xls]Sheet1!$B:$B, $C8 + 16):INDEX([AXS.xls]Sheet1!$B:$B, $C9), 0), 3), " ")
i have this formula, and i think it will work if i find a way to correct the blue areas. they are trying to define the match array. i tried using the address and cell functions with no luck. i just want the array to return something like B2:B15 (from the AXS sheet) so the match function works. in the current sheet, C8 and C9 have values that refer to rows in the AXS sheet
I am trying to populate a cell based on which number meets the criteria I define. This is based on sales revenue, so if the revenue is less than $6.5M, I want to use a certain value. If the value is equal to $6.5M but less than $8M I want to use another value and finally if the revenue is greater than $8M i want to use another value. Here's my formula, but it returns $0.
=IF(B2<6500000,Bonuses!J45)*OR((B2>6500000)*AND(B2<8000000),Bonuses!F45)*OR(B2>=8000000,Bonuses!B45)
I want to define a cell range using a fixed column letter and then row numbers that are held as values in the spreadsheet somewhere. So for example I want to enter a formula = SUM(A4:A35). The problem is that the ranges I want to define are irregular and the row numbers I need have been calculated elsewhere in the spreadsheet. Say the number 4 is contained in cell B35 and the number 35 is contained in cell C35. So I want to say something like =SUM(A"plus number taken from cell B35":A"plus number taken from cell C35")
View 5 Replies View RelatedI have a built a catalogue of records for various of my companies assets. Each asset has its own sheet in a work book and I have used a vb macro to include an automatic Index sheet at the front of the book. This takes the names of the various tabs, in the order I have them in the workbook and creates a simple listing in column A as an Index List
What I want to do is to build a summary table to the right of the Index List, pulling in a few of the key data points about the assets into a single table.
To do that I need to be able to extract the text string from the Index List and use it to form part of a cell reference pointing to a specific cell in the relevant individual Asset sheets.
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
I have a list for addresses in excel in single column as shown below - aanandhi narayanan 3430 chemin de riviere sanjose,CA95148
DOMINIC ABANO 3838 GLENGROVE WAY SAN JOSE, CA 95121
abdi abdi 5390 monterey rd #6 sanjose,CA95111
Sheribel Abinsay 3212 Gateland CT San Jose, Ca 95148
I need the result to be in a way like -
3430 Chemin de riviere
San Jose
CA
95148
3838 Glengrove way
San Jose
CA
95121
5390 monterey rd#6
San Jose
CA
95111
3212 Gateland CT
San Jose
CA
95148
I have around 12000 records with the same format.
On a worksheet called "Contact Info" column A starting in row 2 I have a list of names (variable length). In Columns B2-D I need the email address, work phone number, and cell phone number.
View 5 Replies View RelatedUnzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...
I have the