I'm writing a function which includes the need to merge 2 ranges into 1 new Range object. The problem is that adding a breakpoint just after this occurs, and viewing the immediates, the new range only actually contains the first input range
For testing, and displaying here I've placed the 2 sub-Ranges into temp objects
[Code]....
The breakpoint is on the next line (not shown), so I can view all the Locals
tempyR1 and tempyR2 both are Range objects containing the correct Range data as expected from the code
However, objExcelRange only contains exactly the same as tempyR2
I'm using the Locals to check as this new combined Range will undergo further processing before being placed onto a sheet, and the combined Range will actually be generated dynamically depending on what options the user picks from a second sheet within the WorkBook - which could in fact be created from between 2 and 5 sub-Ranges
'How do I use a FOR NEXT loop on a union to just list all cell values in Col A?
'Just need a little help getting a handle on ranges and the union of ranges. ' This is my first time posting a question so any patience is appreciated.
Dim r1 As Range Dim r2 As Range Dim myMultipleRange As Range Dim xCell As Range
Set r1 = Sheets("Sheet1").Range("A1", Range("A65536").End(xlUp)) Set r2 = Sheets("Sheet1").Range("B1", Range("B65536").End(xlUp)) Set myMultipleRange = Union(r1, r2)
r1.Select
For Each xCell In r1 'Ive been using this type of code to access anything I need from a sheet. Debug.Print r1(xCell.Row, 1), r1(xCell.Row, 2), r1(xCell.Row, 3) Next xCell...............
I am trying to create a union range that is comprised of two cells that are no where near each other on a worksheet. I keep getting the object required error. Everything else works perfectly.
Dim myRng As Range Set myRng = Application.Union((Range("IndData1")), (Range("IndData2"))).Activate Do Until ActiveCell = "" Selection.Copy
I need the values that are copied from the template to copy over in text form from the "Data" Tab. Secondly, the master sheet has multiple lines for each vendor. For the area highlighted in red I'd like for it to copy all cells in column C for the vendor and search the vendor by name. Then, move to the next sheet.
A range of cells is populated by numbers and formatted as such, some of those cells contain zeros. How do you calculate a range of cells without the zeros in the range? The zeros skew the results.
I'm looking for: a cell (in column C) that sums Column C from C6 to the row above said cell. (A Total) So if new rows were added, these values would be included in the sum.
What I'm currently working with is a simple Sum formula, but this sum does not include rows added after the predefined sum range.
In my sheet I have a range on the go called 'cells_replen', I then need to search through the sheet and if a cell matching a given criteria is found I want to add it to the named range. The idea is that when I've done all the adding I can just select the range and then go back through the cells later on without searching for them all over again. The first code that declares the first cell I need in the range is:
Have been trying to set a chart here to autoupdate which normally is fine to do. In this case however there are other columns in the data table that run down to Dec 2014. Even if i define my needed range, the graph will show the full timeframe (with lots of unneccessary space).
I've attached an example. Rate % is the column that will be updated monthly and I would like the graph to only increment along when a new figue is entered here. I've defined this range as 'Rate' within the sheet.
I have a list of names I used in data validation (dropdown list)....I need to add more names to the list....What is the best way to change the range to include new listings? Is the offset function suitable for data validation? How do you use the Offset function in data validation?
Having a hard time putting this one together..Trying to do: Create a formula that counts how many cells in Column L, that fall within a date range and also have a specific category of "text" (Column E). What I've tried:=COUNTIF($L$4:$L$166,"
I'm trying to make a code so that when optionbutton1 is checked, it allows you to right click to select a cell, then right click on a different cell and select that cell as well as the previous cell, etc. Here's What I have so far.
Quick question: When using "With" is it possible to specify 2 ranges, or will I need to do 2 different with blocks? The reason I say not using Union is because I need my ranges seperate. I run 1 set of commands on Range 1, and 1 set of commands on both Range 1 and 2.
(Using Office 2003 on XP Pro) I have two named ranges that I want to union into one big named range so that I can use the big named range in a validation table. Unfortunately the big range does not appear on the list of named range so I switched to VBA to try and lick this but really I was hoping a non-VBA solution exists. Exploring possible VBA solutions, here is what I have so far:
I'm trying to union two different ranges that exist on two different sheets and then copy the unique values into a third range with just the unique values. I was going to then use the unique range as my rowsource in a listbox. This is the code I was working with so far but i'm getting a compile error (method range of object failure).
Private Sub UserForm_Initialize() Dim range4 As Range Dim range3 As Range Dim range2 As Range Dim range1 As Range Set range1 = Worksheets(1).Range("MyRange") Set range2 = Worksheets(2).Range("MyRange2") Application.Union(Range("range1"), Range("range2")).Select Selection = range3 range3.AdvancedFilter Action:=xlFilterCopy, CopyToRange:=range4, Unique:=True Me.lstone.RowSource = range4 End Sub
I am writing a UDF to find the average of two ranges, which start at the StartDate and then go back a certain number of days, that are on another sheet. When I use Union to try and unite my two ranges the resulting range just equals the first range.
VB: Public Function ModifiedAverage(StartDate As Variant, SheetTenor As String, History As Double) Dim DateRow, NbCols As Double DateRow = Application.WorksheetFunction.Match(StartDate, Sheets(SheetTenor).Range("A:A"), 0) NbCols = Application.WorksheetFunction.CountA(Sheets(SheetTenor).Range("6:6"))
I'm trying to select the same cell and a blank cell multiple with a UNION(). Is this possible?
Here's a summary of my code:
Code: Dim c Dim Rng As Range Dim blankC As Range
Set blankC = Range("XFD1048576")
Code] ......
Ultimately, I'm trying to copy various cells and reorganize them including blank cells to conveniently use UNION for a quick copy and paste as opposed to explicitly defining where to paste everything.
I would like to check if selected cells is a union of several ranges or one solid range. I am sure there is a way, but did not manage to find it. How to do it?
how one can union a selection without looping through the cells? I need to write a noncontinuous range into an array, and it can't be sorted as I'm using specialcells(xlCellTypeVisible).
columnA contains account numbers sorted in ascending order i need to use the union method to select all rows where the account number changes so that later i can insert rows between different account numbers in one action. i tried to use the following code but an error occurs stating 424 object required ....
I have two worksheets sheet1 & sheet2 in Workbook3 both get data from two different workbook1 & workbook2 using Microsoft Queries. Column Headers are same but contentes and no. of rows are different in these sheets. I would like to combine data from these sheets into sheet3 of Workbook3 so that i can create pivot table on that. I tried using Union Method, But it gave me "Run time error '1004'. Method 'Union' of object '_Application' failed in the following line
Set myMultipleRange = Application.Union(r1, r2)
Union method works fine when combining ranges from the same worksheet.
Multiple consolidation in Pivot table is not desirable to me as i have to group data using two columns and i could not get what i wanted using two page fields.
I have created named ranges for each sheet data. Is there an alternative to Union method for combining these named ranges from two worksheets into third sheet through VB code?
I have the following two ranges in the same spreadsheet: A1:A1000 and B1:B1000. Both contain data that I would like to manipulate. Let's assume I would like to add "1" to every cell in the two ranges. This is what I have so far:
Sub Test2() Dim wb As Workbook Dim ws1, ws2 As Worksheet Dim rng1a, rng1b, rng_union As Range Set wb = ThisWorkbook Set ws1 = wb.Worksheets("testsheet") Set ws2 = wb.Worksheets("result") ws1.Select Set rng1 = Range(Cells(1, 1), Cells(1000, 1)) Set rng2 = Range(Cells(1, 2), Cells(1000, 2))
Set rng_union = Union(rng1, rng2)...................
Function ADDONE(rng) n = rng.Cells.Count ReDim rng_add(1 To n) For i = 1 To n If rng(i) = "" Then GoTo NextIndex rng_add(i) = rng(i) + 1............. End Function I have to somehow combine the two ranges because the data needs to be manipulated simultaneously. Instead of having the range of results returned to me (see worksheetfunction.transpose), I could have calculated the variance, average etc... of the results, too. I'm using the transpose function to show that the operations in function ADDONE are only conducted for the first range of cells (rng1) that I have joined with the union method. I presume that Union might not be the correct method but I don't know ehich other method to use.
I have 4 sheets. In each sheet, I have a column of data for every hour of every day of one year.
In the 1st worksheet, I want to make a chart using :
- for Y values : the average of the data for each day - for X values: the day
In the 3 other worksheets, - for Y values : the data for each hour - for X values: the hour
To make it more simple, I will first build in the "D" column the data of the average data for each day (so, every 24 columns)
Here is my
Dim lNbSheet As Long ' sheet number Dim rSheetData As Range ' what will be my Y values Dim rSheetTime As Range ' what will be my X values Dim sSheetName As String ' current sheet
For lNbSheet = 1 To 4
'selection of the Y values Sheets(lNbSheet).Select sSheetName = ActiveSheet.Name
I get the error "methode SeriesCollectiosn of Object _chart failed;
Also, if you have an idea that could make me avoid writing all the new average-for-the-day data in column D (using it directly),
I have a code in software that exports results to excel. But it stores the numbers associated with indices as text. I need to change all of them to numbers. So I have written the following code, that search through the folder, converts text to numbers and colses the file.
Sub ConvertText2NumberFiles() Dim v As Variant Dim rng1 As Range, bk As Workbook Dim i As Long ChDrive "C" ChDir "C: ...analysis"
[Code]....
The problem is it takes time becuase it is going through A LOT OF cells. I only need at most the first 4 columns and the first 2 rows. So I wanted to use the union. I wrote the following:
Set IndexColumns = bk.ActiveSheet.Range(Columns("A") & ":" & Columns("A").SpecialCells(xlLastCell)) Set IndexRows = bk.ActiveSheet.Range(Rows("1") & ":" & Rows("1").SpecialCells(xlLastCell)) Application.Union(Range("IndexColumns"), Range("IndexRows")).Select
Which doesn't work! Morover it is only for one column and one row.
NOTE1 : Like any matrix, the intersection of index columns and index rows is blank! NOTE2 : The lenght of indices is different from one file to another
I created a union query in Access to join two tables (Projections and Actual Sales). The query produces the results I want. I need to create a pivot table in Excel using the union query as the source. When I pull up the data import function in Excel, the union query does not appear. Do I need to do something else? I have tried to create a select query where I select all from the union query and I can find that fine.
When I use this query to create the pivot table the results end up all zeros when I try to sum the values. It creates some crazy results when I show it as count of also.
I can provide the data in either the Access database or Excel spreadsheet.
I have to find the union of 2 columns in excel and club those 2 columns into a single column with values in the increasing order.eg: column 1- 0 2 4.. , column 2- 1,3,5.. final result in column 3 should be 0 1 2 3 4 5...plz let me know the code for this that i can run in VB editor(- excel 2007)
i've been using an IF function in order to display a certain value when one or more criteria are met in one cell in one specific worksheet. here's how it looks like:
with different values and names.. but it's just to give you the idea of what kind of function it is. this one works perfectly, but i also needed another one in which the logical test range is no longer only one cell, but more, thus a selection. i wrote the same formula, but instead of the "A1" i wrote for example "A1:A20" which i thought it would work.. but it doesn't. even more surprising, when i open the insert function (the helping wizard that pops up when i click the "fx" button on the left of the function string) and i put in the logical test, at the bottom of the window it says the correct result (ie: yes). but on the actual worksheet, the cell displays the wrong result (no). i know there are no errors in the formula, so i really don't know how to solve the problem.
