Auto Updating Graphs To Not Include Full Range?
Mar 13, 2014
Have been trying to set a chart here to autoupdate which normally is fine to do. In this case however there are other columns in the data table that run down to Dec 2014. Even if i define my needed range, the graph will show the full timeframe (with lots of unneccessary space).
I've attached an example. Rate % is the column that will be updated monthly and I would like the graph to only increment along when a new figue is entered here. I've defined this range as 'Rate' within the sheet.
View 3 Replies
ADVERTISEMENT
Dec 7, 2009
I have created a series of numbers using a column 'n' and 3 cells for Start value, End value and increment, this is thwe formula: .....
View 9 Replies
View Related
Feb 20, 2008
I have the following macro which runs vlookups between two sheets in excel. Whenever i add columns to the range the vlookup column reference is not the correct cell. Is their any way I can adjust the macro so that the column number adjusts in the formula when a new column is added??
Sub template()
Range("C7").Select
ActiveCell.Formula = "=if(VLOOKUP(C6,'Project master'!B7:BG150,3, FALSE)="""", """",VLOOKUP(C6,'Project master'!B7:BG150,3, FALSE))"
'category
Range("c9").Select
ActiveCell.Formula = "=if(VLOOKUP(C6,'Project master'!B7:BG150,4, FALSE)= """", """",VLOOKUP(C6,'Project master'!B7:BG150,4, FALSE))"
'sub-category
Range("c10").Select...................
View 3 Replies
View Related
Jun 9, 2014
I have a number of tables which I update on a weekly basis and I've created a number of graphs based on these values, but I only want the graphs to show the previous full months complete data rather than the most recent update. Also, I'd like the graphs to automatically update from the table at the start of each month for the preceding months complete data without me having to re-select the data range each month.
View 1 Replies
View Related
Feb 16, 2009
I've got 100's of different graphs the problem is i'm currently manually updating them all, a simple example of the data is: ....
View 9 Replies
View Related
May 16, 2007
How I can force the application to auto full screen and hide all toolbar?
View 5 Replies
View Related
Nov 19, 2012
I have a userform [AddEditMove] with a bunch of textboxes (something like 30) that create entries in a spreadsheet ["Move Records"] along one row. In addition to creating those basic entries, the textboxes also fill in other spreadsheets after manipulating the entered data in various ways.
Therefore, if an entry needs to be changed, it needs to be changed from the userform rather than just on the main sheet, or those other actions won't be taken. At least, that's how I see it now. I'm interested in knowing how other people have handled similar set ups.
Right now, what I think I'd like is for the user to be able to double click any entry on the main sheet and have that action call up the userform and autofill the data from the sheet so the user can change what they need to change and then update it. It would also require a tweak in the userform code -- "if called from cell click, then fill info in selected row, rather than next empty line" -- if that's possible.
View 1 Replies
View Related
Dec 18, 2012
I have 2 drop down menus based on car make and model.
The first contains Make and the second contains the models of that make using the indirect function (All through data validation (this may be my problem))
Now what I'm wanting is that when the Make changes, the Model will automatically changes to either the top (or any really) model from the list for that make or to change to blank. So can this be done without VBA?
View 4 Replies
View Related
Jan 5, 2009
It's some code I found and altered that automatically updates the cell to the right of a column that has drop down box data validation, creating a list of the selected values seperated by commas. The thing is, I only want it to do this in columns 8 and 10 but data validation drop-down boxes have been used in several other columns. I've tried various methods of limiting the scope, the latest being the line: If Target.Column = 8 Or 10 Then. But the auto update is still being applied to all drop down boxes in the sheet. So, how can I make sure the auto update only happens when the drop down boxes in columns 8 and 10, updating into columns 9 and 11.
View 4 Replies
View Related
Sep 20, 2006
Everytime that I insert a row into a worksheet which a number of formulae refer to, those formulae get updated automatically in such a way that it is not in my favour.
The formulae refer to rows 2:2000 on a number of different columns. Adding a new row shifts the references to 3:2001. I presume that I can stop this from happening
Example:
= SUMPRODUCT(('List of DD Donors'!E2:E2000)*('List of DD Donors'!F2:F2000='DD Tally'!E6)*IF(DATEDIF(('List of DD Donors'!G2:G2000)-1,DATE(2006,3,31),"m")>12,12,DATEDIF(('List of DD Donors'!G2:G2000)-1,DATE(2006,3,31),"m")))
changes to...
=SUMPRODUCT(('List of DD Donors'!E3:E2001)*('List of DD Donors'!F3:F2001='DD Tally'!E6)*IF(DATEDIF(('List of DD Donors'!G3:G2001)-1,DATE(2006,3,31),"m")>12,12,DATEDIF(('List of DD Donors'!G3:G2001)-1,DATE(2006,3,31),"m")))
View 4 Replies
View Related
Feb 12, 2014
i have attached a sheet where I have 4 graphs on one sheet. I prefer this to an overlay. I would like to add a 5th graph but it would make all the the graphs too small. Is there a way to make the graph background longer. For instance, extend the length of this so that I can put multiple graphs on it and then just scroll from top to bottom to review them? Also, how do I copy and paste these individual graphs into a newly created graph. copy/paste doesn't work on these?
Boiler.xls
View 1 Replies
View Related
Feb 11, 2006
What I am wanting to do is have excel insert a static date automatically. I know ctrl + : inserts date and ctrl shft + ; inserts time. I want excel to do this automatically. The now() and today() functions auto update the date. I dont want the date auto updated when the file is reopened after it is saved. The file is a template so I guess what I am really wanting is a automatic date/time stamp when the user saves the file so when it is emailed and reopened the date does not auto update.
View 6 Replies
View Related
Jul 3, 2014
So, I work in a large indoor grow facility, and as such, we need to keep an active, updated calendar of all activities that will need to happen in the grow. If something happens to a set of plants, we need to change to date of transplant into the next pot size and every transplant after that, as well as moves into the flowering room from the vegetative room.
I have tried to manually make a calendar (I'm not worried about auto-generating a calendar or auto-filling dates, only things that happen on those days.) and tie in this information, but I'm having issues automatically searching a column and finding the date, and then pulling more information from that row automatically. (i.e. If anything in Column E has the date 7/3/14, then fill the data from Column C and Column B on the same row.)
I'm attaching a copy of the spreadsheet that I am trying to pull the Data from, and a copy of the Calendar I mocked up.
FYI, the spreadsheet I am pulling from Automatically fills once you put in the Clone Date, and then if you add in an adjusted date, it will adjust all later dates from that same section.
I tried to find something other than Excel as well to do this for me, but AFAIK nothing exists to make the calendar update Live, only to reproduce a new calendar with the current spreadsheet. This is not an option, I need it to stay up to date.
View 7 Replies
View Related
Oct 29, 2008
I have fought with this for 2 days and I am trying to have a worksheet cell update the date and time if the cell it is referencing (B3 see below)
Here is the formula I am using however it updates every time a new row is added to the worksheet. So the Date/Time stamp on each row is always updated to NOW() everytime.
=IF(ISNA(B3),"0/0/00 00:00",NOW())
I would like to have a Date/Time stamp stay as is once that row has been added. Is there anyway to stop the field from updating once the date and time have been set?
View 9 Replies
View Related
Aug 5, 2013
It seemed to be working OK for the first hour I had my sheet open. I then noticed that a variation of the following Sub would not update unless I clicked somewhere else in the sheet or edited another non-included cell. It's like something is holding up Excel from running this function and updating the cells if b2 is greater than a3 then a3 will not update to = b2 immediately.
Private Sub Worksheet_Change(ByVal Target As Range)
If [b2] > [a3] Then [a3] = [b2]
End Sub
My data in column B is formula derived and that formula contains data that is live updated data brought in from DDE link.
My question is, should I setup this formula as part of a macro, instead of workbook code and attach an Application.Ontime function to ensure reliable execution? Could too many IF statements cause delays (about 100 of them currently in the code Private Sub Worksheet_Change(ByVal Target As Range))?
View 1 Replies
View Related
Aug 13, 2009
if it is possible te refer to a cell in another worksheet.
I have 10 worksheets in sheet one I put in cel A4 a digit en sheet 2 I put the formula that refers to sheet 1 cel A4.
Now I want a formula that refers to sheet -1 so in sheet 3 the formula automatically refers to sheet 2 cel A4 and in sheet 4 the formula automatically refers to sheet 3 cel A4 without corrections to the formula.
View 9 Replies
View Related
May 21, 2009
Running XL07. Need to have one workbook pull data from several dozen others.
Have columns to the right that refer to the query table.
As I add in queries to other workbooks, the time to update each individual query goes up a lot; it feels as if the update time is increasing geometrically. I'm giving up after 2 hours, for query updates that used to take
View 9 Replies
View Related
Feb 21, 2014
I need it to be like:
=B10 2014
(So the first part changes depending on what B10 is but the 2014 always stays)?
View 9 Replies
View Related
Jun 4, 2007
I understand that you can do dynamic named ranges for graphs, using one named range for each series and another for the categories. However, the graph I'm working on will have a lot of series'. Is there a way to do this cleverly? I'm trying to avoid making a named range for each one.
View 2 Replies
View Related
Apr 2, 2014
I need the values that are copied from the template to copy over in text form from the "Data" Tab. Secondly, the master sheet has multiple lines for each vendor. For the area highlighted in red I'd like for it to copy all cells in column C for the vendor and search the vendor by name. Then, move to the next sheet.
View 10 Replies
View Related
Jan 3, 2014
I'm trying to create an autoupdating price list using a part number and a website. I've tried Excel's data import wizard.
Website: WebFLIS - Public Search
Sample data Category
Chaplain Kits
Item
Chaplain's Kit, Consumable
NIIN
9925-01-326-2855
Price
$276.94
Description
Also called the ReSuppply Kit
VBA Code that allows me to automatically open the page.
Dim IE As Object
Sub submitFeedback3()
Application.ScreenUpdating = False
Set IE = CreateObject("InternetExplorer.Application")
[Code] ......
Ideally, I'd like to click a button that says "Update Prices" and it will search WebFlis for the NIIN listed and update the price. I have 717 items on my list so updating would be by click only (I think I can write that portion).
If that is not an option, I'd like to be able to click on each item row (think hyperlink) and be able to see the results for that individual item.
View 9 Replies
View Related
Aug 28, 2006
I have a spreadsheet which uses dynamic ranges to produce graphs for individuals which are selected using a scroll box. I can't figure out how to print multiple graphs at a time without selecting each individuals name and then printing the page which is time consuming, also it would be great if I could somehow get the individuals name highlighted in the list so whenthe page is printed you can see who's data it is.
View 4 Replies
View Related
Jan 19, 2010
how to make the full range variable...
View 9 Replies
View Related
Aug 15, 2014
I'm writing a function which includes the need to merge 2 ranges into 1 new Range object. The problem is that adding a breakpoint just after this occurs, and viewing the immediates, the new range only actually contains the first input range
For testing, and displaying here I've placed the 2 sub-Ranges into temp objects
[Code]....
The breakpoint is on the next line (not shown), so I can view all the Locals
tempyR1 and tempyR2 both are Range objects containing the correct Range data as expected from the code
However, objExcelRange only contains exactly the same as tempyR2
I'm using the Locals to check as this new combined Range will undergo further processing before being placed onto a sheet, and the combined Range will actually be generated dynamically depending on what options the user picks from a second sheet within the WorkBook - which could in fact be created from between 2 and 5 sub-Ranges
View 7 Replies
View Related
Jun 20, 2013
A range of cells is populated by numbers and formatted as such, some of those cells contain zeros. How do you calculate a range of cells without the zeros in the range? The zeros skew the results.
View 5 Replies
View Related
Apr 1, 2014
How to make the below selected range, which represents column Q, also include column A?
Range(ActiveCell, ActiveCell.End(xlDown)).Select
View 4 Replies
View Related
Apr 16, 2008
I'm looking for: a cell (in column C) that sums Column C from C6 to the row above said cell. (A Total) So if new rows were added, these values would be included in the sum.
What I'm currently working with is a simple Sum formula, but this sum does not include rows added after the predefined sum range.
View 9 Replies
View Related
Mar 8, 2009
In my sheet I have a range on the go called 'cells_replen', I then need to search through the sheet and if a cell matching a given criteria is found I want to add it to the named range. The idea is that when I've done all the adding I can just select the range and then go back through the cells later on without searching for them all over again. The first code that declares the first cell I need in the range is:
ActiveWorkbook.Names.Add Name:="cells_replen", RefersTo:=Range("A3")
That works fine, I can also manually add cells into the range as below:
ActiveWorkbook.Names.Add Name:="cells_replen", RefersTo:=Range("cells_replen, A9")
No problem if I want to just add 'A9' but because I'm searching through the sheet, I need some way to just add 'ActiveCell' or similar.
View 4 Replies
View Related
Apr 30, 2013
I have a list of names I used in data validation (dropdown list)....I need to add more names to the list....What is the best way to change the range to include new listings? Is the offset function suitable for data validation? How do you use the Offset function in data validation?
View 2 Replies
View Related
Feb 13, 2014
I need an autofilter which filters rows based on a list of values (+50).
The problem is that I am looking for rows INCLUDING values from the list, not for exact match.
I am not able to make excel filter values including the values from the list... I am able just to filter values matching exactly values from the list.
[Code] .....
View 2 Replies
View Related
