Use Variable For Web Query URL

Dec 18, 2006

I have a worksheet that uses a web query to return data, and display it in a worksheet. This works fine. I now want to use VBA to call a URL, but not display the information returned in a worksheet. Rather, I want to store that information in a variable, and then use it in my VBA sub.

View 4 Replies


ADVERTISEMENT

(Save As) Variable File Format Routine Query

May 31, 2012

The following code stops at the red line with "Method 'SaveAs' of object '_Workbook' failed.

FF="xlCSV". It works fine if I replace
Code:
FileFormat:=FF
with
Code:
FileFormat:=xlCSV

Code:

Sub SaveIt(FileNm, FF)
Dim FSO As Object, a
Set FSO = CreateObject("Scripting.FileSystemObject")
If FSO.FileExists(FileNm) Then FSO.DeleteFile FileNm
If FSO.FileExists(FileNm) Then

[code]....

View 2 Replies View Related

Setting Values In A Variable Range Occurence Query

Jul 18, 2006

I am trying to count the occurences of combinations within a range defined by contiguous cell values in one column. My problem lies with setting the value of variables that are queried within the defined range. My macro should;

1)Set ComboValue1 & ComboValue2 values to A1 & B1 cells values respectively
2)define range to be searched by how many contiguous values there are in column D
3)search column E for 2 figure combination (defined by A1 & B1). If present increment counter by 1 and add to column C (to be visible in worksheet). If no match carry on
4)define new range by next set of contiguous values in column C
5) step 3
6)when all possible contiguous ranges defined and searched from column c, perform again on next combination down columns A & B with refreshed occurence counter
7)finish when all combinations are searched for

Sub CountComboOccurence()
Dim ListCounter As String
Dim ProgCounter As String
Dim Counter As Integer
Dim ComboValue1 As String
Dim ComboValue2 As String
Dim Rng As Range
Application. ScreenUpdating = False
ListCounter = 0
ProgCounter = 0
Counter = 0
ComboValue1 = 0.......................

View 2 Replies View Related

Pass Parameter From Excel Through MS Query To MS Access Query

Nov 26, 2012

I have an MS Access query that contains a parameter. The parameter is a date field, and I have configured that in the Access query. If I run the query within the MS Access user interface, it prompts me for the paramater value as expected, and runs just fine. However, I want to connect to this query from within Excel as a data source.

I have created a connection to the Access file using ODBC from within Excel. In the MS Query window, I am merely selecting all of the fields resident in the MS Access query, and returning all values. In other words, there is no selection criteria in the MS Query. I have done this many times with Access queries that DO NOT contain a parameter, and everything works fine. However, in this instance, I need to pass a parameter through to MS Access in order for the query to run. At the moment, I get the "Too Few Paramaters...1 expected" error message. This makes sense, because I haven't figured out how to pass the paramater to MS Access.

Is there a way to structure this that does not involve VB code? If so, I'd love to know how. I have tried creating parameters in MS-Query with the same name, but although I get the prompt it doesn't connect with the Access query as the source for the parameter value.

If the solution requires using code, I'm good with VB Code in Excel...is there VB for Excel code that could make this happen?

Failing that, I guess there must be (I've seen a few in my search thus far) Access VB Code that can make this work. I'm very rusty using VB with Access, so this is my least favored solution. However, if this is the only option, keep in mind that I need to pass the paramater ultimately from a user who will initiate the process using Excel.

View 3 Replies View Related

Query Parameters Which Takes The Date From The Cell Into The Query

Mar 29, 2007

Need the query parameters which takes the date from the cell into the query. How should I modify my query if it needs to take the date from a cell?? The bold one date should be picked from one of the cell in sheet 2.

My query is this
WEB
1
http://fc-web-phl1-101.phl1:8090/gp/...runReport.y=12

Selection=15
Formatting=None
PreFormattedTextToColumns=True
ConsecutiveDelimitersAsOne=True
SingleBlockTextImport=False
DisableDateRecognition=False
DisableRedirections=False

View 2 Replies View Related

Create An Conection With MS QUERY To A Csv And Query Data

Sep 6, 2008

I have a csv file on another drive on the network that i need to query. I believe that ms query would be the best way. I know that a DSN needs to be setup but this macro will be used by various users who wont know how to do that. thus I would like to create one via VBA every time the task needs to be run.
I haven't a clue how to do this and i need it to be explained to me in general terms with words of one syllable!

View 9 Replies View Related

Query An Access Query With VBA Function

Jul 8, 2008

I'm trying to query a query in Access 2003, from Excel 2003.

The query in Access looks like:
AccessQuery: [SELECT VBAFunction(field1) FROM Table]

The query in Excel looks like:
ExcelQuery: [SELECT * FROM AccessQuery]

I use the following VBA code in Excel to excecute the query:

With ThisWorkbook.Worksheets(cDataSheetName).QueryTables.Add(Connection:=strConnection, _
Destination:=ThisWorkbook.Worksheets(cDataSheetName).Range("A1"), Sql:=strQuery)
.RowNumbers = True
.Refresh BackgroundQuery:=False
iResultRowCount = .ResultRange.Rows.Count
End With
When I execute this code I get the error message 'SQL Syntax Error' (Error 1004). When I remove the VBA function from the query in Access, it all works fine.

View 9 Replies View Related

Edit Query Using Query Wizard

Apr 25, 2006

I created an Ms Excel Database Query to bring in data from MS Access. (versions 2002 of MS Excel and Ms Access). The query works fine initially. I can right click, choose Edit Query and change my criteria. Results are returned almost instantly.

My problem is that, once I save the workbook, or autosave happens, I get an error when I right-click to Edit Query: This query cannot be edited by the Query Wizard..

View 2 Replies View Related

MS Query - Parameters (parameters On A Query But Use A Wildcard To Return All Instances)

Nov 17, 2009

Is it possible to set parameters on a query but use a wildcard to return all instances? I have a query that I want to be able to set multiple parameters on but give the user the ability to select as many or as few parameters as they want to see. 2 of the parameters are number fields and 2 are text fields with no spaces.

View 4 Replies View Related

Set Variable: Object Variable Or With Block Variable Not Set

Jun 4, 2007

I have the following code (just pasting the relevant section) which crashes when it reaches the highlighted line of code. and a dialog box pops up with the text: "Object variable or With block variable not set"

Sub test()
Dim StartRng As Range
Dim Buffer As Range

Set StartRng = WorkSheets("Sheet1"),Cells(1,1)

StartRng.Activate
ActiveCell. CurrentRegion.Select

Buffer = rngStart.CurrentRegion.Copy

' I also tried the following line of code but that didn't work either
'Set Buffer = rngStart.CurrentRegion.Copy
..
...
End Sub

View 9 Replies View Related

Insert A Variable Number Of Rows And Copy And Paste From And To Variable Positions

Aug 8, 2009

On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.

View 4 Replies View Related

2007 Macro: Run-time Error 91:Object Variable Or With Block Variable Not Set

Feb 20, 2009

I'm fairly new to macro's and VBA, by searching on the internet i've copied and pasted some code together into a macro.
But it ends in a Run-time error 91...

The macro opens a target .xls file in a selected folder, performs copy - paste actions from masterfile to targetfile.
Than it filters data in the targetfile sheet1 and copy's the results to the various other sheets; saves and closes the targetfile.
The next target file in the folder is opened and the actions are repeated in this second target file.
For the first target file this works smoothly; but for the second one (of a total of around 100) it does not copy the filter results to the other sheets in this workbook.
The error message i get is: "Run-time error 91:Object variable or with block variable not set."
When i hit debug it highlights the line "ActiveSheet.Next.Select" which, at least in the first file, seems ok.

View 9 Replies View Related

Summing Variable Values Across Variable Sheets In Multiple Columns

Jun 27, 2014

I need a macro that will create a sheet at the end of the workbook.

Sum data from a variable amount of sheets and display that data on the created sheet.

Here is a step by step:

Starting on sheet 5.

Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.

Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.

(Note: The data would also need started on row 4. Everything above row 4 is headers)

Here is a small example:

D E T U V
13019090W Part A1
68705500 Part B1
64202900 Part C-11
59634600 Part D1
26005300W Part E1

I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).

After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.

So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).

View 2 Replies View Related

Inputbox Value Can Be Compared To A String Variable Or A Numeric Variable At The Same Time

Dec 7, 2008

I am trying to develope a "goto" page macro where the page value maybe 1,34,7A, 256C etc. I am not clear on how an inputbox value can be compared to a string variable or a numeric variable at the same time. This is what I have done, but when the texboxvalue is "7A" it doesn't work.

View 3 Replies View Related

Excel 2007 :: Object Variable Or With Block Variable Not Set Error

Feb 28, 2013

I Wrote a code which as intended to open each excel file in a folder and copy the data containing in it into a new sheet.

But While running the code the first excel file gets open, and an error message "Run Time Error 91-Object Variable Or With block Variable not set Error"

How to set the file which got opened from the folder to wbk variable.

Code:
Sub dataintoonesheet()

Dim i As Integer
Dim jk As Integer
Dim j As Integer

Dim rowstart As Integer
rowstart = 3

[Code] .......

View 9 Replies View Related

Macro Error Message (object Variable Or With Block Variable Not Set)

Jul 7, 2009

When i try to run the code below i get the error message - object variable or with block variable not set-

Sub REFRESHXX()

'LIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1, Criteria1:="1"
'SET RANGE
Dim sFormula1 As String
Dim sFormula2 As String
Dim sCell1 As String
Dim sCell2 As String
Dim sSheet1 As String
Dim sSheet2 As String
Dim r As Range
Dim MyRange As Range 'for testing

With Sheets("Points")
sFormula1 = .Range("CY1").Formula
sFormula2 = .Range("CY2").Formula
End With

'FORMULA IN R1C1 STYLE
strFormula = "=IF(ISNA(VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE)),0,VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE))"
'ENTER FORMULA IN ALL CELL RANGES
r.FormulaR1C1 = strFormula
'REDUCE TO VALUES
Dim ar As Range 'an area is a range
For Each ar In r.Areas 'areas are discrete, contiguous ranges of cells
ar.Value = ar.Value
Next ar

'UNLIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1

End Sub

View 9 Replies View Related

Find Method Code: Object Variable Or With Block Variable Not Set

Sep 8, 2006

I need my program to:
- find the cell containing the string "Datum/Tid"
- record the column and the row of the found cell in two variables lCol and lRow

Here is my

Sub test()

Dim rFoundCell As Range
Dim lRow As Long
Dim lCol As Long

'Find method of VBA
Set rFoundCell = Range("A1")
Set rFoundCell = Worksheets("Sheet1").Range("A1:Z50").Find(What:="Datum/Tid", After:=rFoundCell, _
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)

'for anyof the two lines down I get the message "object variable OR block variable not set"

lRow = rFoundCell.Row
lCol = rFoundCell.Column

End Sub

View 5 Replies View Related

Find Dates Macro: Object Variable With Block Variable Not Set

Nov 21, 2006

I found this nice little bit of code for a date range search in column A but it will not work. Apparently i have not set a variable or something.


Private Sub Worksheet_SelectionChange(ByVal Target As Range)

Dim startDate As String
Dim stopDate As String
Dim startRow As Integer
Dim stopRow As Integer
startDate = InputBox("Enter the Start Date: (dd/mm/yyyy)")
If startDate = "" Then End
stopDate = InputBox("Enter the Stop Date: (dd/mm/yyyy)")
If stopDate = "" Then End
startDate = Format(startDate, "dd/mm/yyyy")
stopDate = Format(stopDate, "dd/mm/yyyy")
startRow = Worksheets("sheet1").Columns("A").Find(startDate, _
LookIn:=xlValues, lookat:=xlWhole).Row
stopRow = Worksheets("sheet1").Columns("A").Find(stopDate, _
LookIn:=xlValues, lookat:=xlWhole).Row
Worksheets("Sheet1").Range("A" & startRow & ":A" & stopRow).Select

End Sub

View 9 Replies View Related

Runtime Error 91 Object Variable Or With Block Variable Not Set

Mar 24, 2014

I am getting error in Set MyRange

[Code] .....

View 3 Replies View Related

Assigning A Variable And Pasting Variable To Last Unused Column

Nov 19, 2008

to assign a variable to equal a Constant variable, then I need to find the last unused row on the worksheet, then paste that variable down the column (1-12200 or so rows). I also need to assign Strings for the first two Rows in the target column.

View 14 Replies View Related

Object Variable Or With Block Variable Not Set Error With Macro

Mar 12, 2009

I attempted to modify "macro_1a1ay" to look into the "comments" sheet (column a) for a specific text string. If that text string is found, I have it delete the entire row, then re-sort the page and return to the calling page. It works well as long as it finds something. When it does not find the string (i.e. like now when the page is blank) it gives me the run-time error mentioned above.

View 7 Replies View Related

Run Time Error 91 Object Variable Or With Block Variable Not Set

Oct 7, 2009

I am having a lot of trouble finding out why I am getting error. I believe the error is because it can't find the number. In cells C115:C314 i have the numbers 1 to 200 in order. when someone types in 1 to 9 in the text box it works, but on 10 and over i get the error ???? here is the code I have

shCalculator.Range("C115:C314").Select
Selection.Find(what:=CInt(txtPackageID), After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Select
x = ActiveCell.Row
shCalculator.Range("ProposedMeter").Value = Cells(x, 7).Value
shCalculator.Range("Package").Value = Cells(x, 12).Value
shCalculator.Range("ProposedMeterAmount").Value = Cells(x, 30).Value
shCalculator.Range("Term").Value = Cells(x, 62).Value
shCalculator.Range("Discount").Value = Cells(x, 67).Value
shCalculator.Range("Equipment").Value = Cells(x, 72).Value

View 3 Replies View Related

Append Variable In Variable Select Case Method

Feb 16, 2012

I want the select case list of a ComboBox to be treated as a variable in order to shorten the code size. To clarify the problem, i post the code with what i want to do, but don't know how to do it that way.

Code:

Select Case ComboBox1.ListIndex
Case 0: y = "AT"
For j = 0 To 26
Case "j": y = sheets("name").Range("A(j)") 'Range A(j) is a string, so y as well, as seen in Case 0.
Next j
End Select

Is something like this possible?

View 3 Replies View Related

Two Macros - Object Variable Or With Block Variable Not Set Error

Jul 11, 2014

I have two macros that run fine separately. I want to join them, but when I do I get an Object variable or With block variable not set error.

Here's the code

Code:

Sub border_highlight_insert()
' Change heavy border to new column, change tint - keyed to year A6
With ActiveSheet
Dim i As Integer

[Code]....

View 2 Replies View Related

Runtime Error 91, Object Variable Or With Block Variable Not Set

Feb 6, 2009

This works fine in Excel 07 but when ran in 03 it doesn't work and I get that error message.

Sub mcrRefresh2()
Sheets("WeeklyData").Range("A1").ListObject.QueryTable.Refresh BackgroundQuery:=False
Sheets("WeeklyData").Range("aa1").ListObject.QueryTable.Refresh BackgroundQuery:=False
Worksheets("WeeklyPivot").PivotTables("PivotTable1").PivotCache.Refresh

End Sub

View 9 Replies View Related

Debugging Error: Object Variable Blocked Variable Not Set

Nov 9, 2009

I am getting an error at this line:

Set rng5 = Range(.Cells(celle2.Row, celle4.Column), .Cells(celle2.Row, celle4.Column))

Sub UpdateNumbers()
Dim rng1 As Range
Dim rng2 As Range
Dim rng3 As Range
Dim rng4 As Range
Dim celle1 As Range
Dim celle2 As Range
Dim celle3 As Range
Dim celle4 As Range
Dim celle5 As Range
Dim flag1 As Long
Dim flag2 As Long................

View 9 Replies View Related

Find Method: Object Variable Or With Block Variable Not Set

Aug 28, 2006

I have a spreadsheet form with all kind of values and what I want to do is to find a data in a worksheet named "Config" based on the spreadsheet activecell value. With the find row adress I return data of another column but same row (in the worksheet) in two diferent label captions. If the spreadsheet activecell value it was found in the worksheet everything is ok but if the value is not found I'm getting the message "Object variable or with block variable not set"....

View 7 Replies View Related

String Variable To Call Defined Range Variable

Nov 10, 2006

Say you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?

I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.

View 5 Replies View Related

Run Time Error 91, Object Variable Or With Block Variable Not Set

Jan 14, 2007

Function Find_Range(Find_Item As Variant, _
Search_Range As Range, _
Optional LookIn As Variant, _
Optional LookAt As Variant, _
Optional MatchCase As Boolean) As Range
Dim c As Range
If IsMissing(LookIn) Then LookIn = xlValues 'xlFormulas
If IsMissing(LookAt) Then LookAt = xlPart 'xlWhole
If IsMissing(MatchCase) Then MatchCase = False
With Search_Range
Set c = .Find( _
What:=Find_Item, _
LookIn:=LookIn, _
LookAt:=LookAt, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=MatchCase, _ ........................

Using the message box I see that sheet 1 opens but then I receive an error message Run Time Error 91, Object Variable or With Block Variable not set. I tried declaring and using set on "project" but got nowhere. I also need to have a message indicating project not found. Once this part is solved I will loop all of my other workbooks

View 5 Replies View Related

Error - Object Variable Or With Block Variable Not Set

Jun 20, 2007

I've got a simple Macro which manipulates data in various worksheets. Problem is that I get the error: "object variable or with block variable not set" in the area of the code that I have put in bold below:

All I'm trying to do in this part is find the first occurrence of the #n/a value ....

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved