I'm trying to query a query in Access 2003, from Excel 2003.
The query in Access looks like:
AccessQuery: [SELECT VBAFunction(field1) FROM Table]
The query in Excel looks like:
ExcelQuery: [SELECT * FROM AccessQuery]
I use the following VBA code in Excel to excecute the query:
With ThisWorkbook.Worksheets(cDataSheetName).QueryTables.Add(Connection:=strConnection, _
.RowNumbers = True
iResultRowCount = .ResultRange.Rows.Count
When I execute this code I get the error message 'SQL Syntax Error' (Error 1004). When I remove the VBA function from the query in Access, it all works fine.
I have an MS Access query that contains a parameter. The parameter is a date field, and I have configured that in the Access query. If I run the query within the MS Access user interface, it prompts me for the paramater value as expected, and runs just fine. However, I want to connect to this query from within Excel as a data source.
I have created a connection to the Access file using ODBC from within Excel. In the MS Query window, I am merely selecting all of the fields resident in the MS Access query, and returning all values. In other words, there is no selection criteria in the MS Query. I have done this many times with Access queries that DO NOT contain a parameter, and everything works fine. However, in this instance, I need to pass a parameter through to MS Access in order for the query to run. At the moment, I get the "Too Few Paramaters...1 expected" error message. This makes sense, because I haven't figured out how to pass the paramater to MS Access.
Is there a way to structure this that does not involve VB code? If so, I'd love to know how. I have tried creating parameters in MS-Query with the same name, but although I get the prompt it doesn't connect with the Access query as the source for the parameter value.
If the solution requires using code, I'm good with VB Code in Excel...is there VB for Excel code that could make this happen?
Failing that, I guess there must be (I've seen a few in my search thus far) Access VB Code that can make this work. I'm very rusty using VB with Access, so this is my least favored solution. However, if this is the only option, keep in mind that I need to pass the paramater ultimately from a user who will initiate the process using Excel.
I'm trying to query Access for some data. One of the fields I need to grab is called MOD, which also happens to be a VBA function. How do I get Excel to recognize MOD as a field name instead of a VBA function? (Renaming it is not an option)
Code: stSQL1 = "SELECT MOD FROM CST_ClaimbyLop WHERE CoCName='" & myCST & "'"
I'm trying to build a query which matches two tables which say has a number like A#### , I want the query to give me the A number's which do not belong in the second table but which do in the first table. i believe i need an SQL query to do this?
i am trying to use VBA to query a access database that i have i want to be able to pull the information that matchs either textbox4 or 5 i am using the code below but i am getting global errors.
Private Sub CommandButton1_Click() Dim custname As Variant Dim Custnum As Variant Dim cnn As New ADODB.Connection Dim rst As New ADODB.Recordset custname = Range("TextBox5").Text Custnum = Range("TextBox4").Text With ActiveSheet.QueryTables.Add(Connection:=Array( _ "ODBC;DSN=Insolvency;Description=Insolvency;APP=Microsoft Office XP;DATABASE=Insolvency;Trusted_Connection=YES"), Destination:=Range("Listbox1")) .CommandText = Array("SELECT * FROM POST WHERE Customer_Account_Name=" & custname & " AND Customer_Account_Number = '" & Custnum & "' ORDER BY Customer_Account_Number") .Name = "Insolvency Post Query"..........................
I'm at a stand-still again, as my current task calls for a way to communicate between Access and Excel. I know where the data I want in my Excel workbook is, and there's a query in place to pull it into a table. What I'm trying to do is write a macro that will open that particular table in Access, run the query, select the table, open a particular worksheet in my workbook, and then paste the data in.
This isn't hard to do by hand, besides finding the right database among a mess of others. But I want someone who isn't me to be able to get ahold of the same data by running the macro. It'll make less work for me in the long run.
I have the below code that will do a data dump of an access table into excel based on an SQL query, is there a way to do a select statement that can match against the data in column C on the spreadsheet.
"Select * From Bsmart where Serial_Number = ##[EXCEL COLUMN C1:Lastrow]##
Code: Dim bkNew As Workbook Dim cnt As ADODB.Connection Dim rst As ADODB.Recordset Dim stCon As String Dim SQl1, SQL2, SQL3, SQL4, SQL5, varSQl As String
I have an access database that has many queries and in order to speed it up I have a Macro in access that runs it in no time, but I need to be able to run the query in access via a trigger in Excel and have come up with the below, but it's not working.
i have code accessing an access database running a "query" which has been defined in the database itself. i asm using ADO - no issues with this. works very well. my problem arises when i change the query to take a parameter. this works ok when i execute in access but not with the code i am using for VBA / ADO. i have tried several techniques but none seem to work.
Dim rsReport As New ADODB.Recordset Dim cnReport As New ADODB.Connection Dim cmdReport As New ADODB.Command Dim prmReport As New ADODB.Parameter cmdReport.CommandType = adCmdStoredProc cmdReport.CommandText = "testQuery-withParam" With prmReport . Name = "FullName" .Value = "joe bloggs" .Type = adChar .Size = 8 .Direction = adParamOutput End With................................
I have to import data into Excel from Access (yes, I have to import it to Excel and cannot use Access exclusively). When I import; however, the formatting does not come over correctly, most especially losing the formatting of numbers. I need one of two solutions:
1.) How to get the formatting to move over correctly?
2.) Or how I can save the formatting of a table, then be able to apply it as a "saved" format? The biggest thing is that the numbers will changed the number of decimal places and/or change from general numbers when I want to see them as currency.
The top table shows how i want this formatted, the bottom shows how it is importing.
Using Excel VBA, I created a query (strQryName) in Access. With below code in Excel, I am trying to copy the data from this query to Excel spreadsheet. However, I am getting nothing but field names. The code returns empty rst. When I check the query in Access, there is definitely data in it.
Dim rst As ADODB.Recordset Dim conn As ADODB.Connection Dim fName, queArchive, queWhere, Query1, strQryName As String Dim e, f As Integer
I looking for a solution to change a Access Query Criteria using a VB code in Excel, without opening the Access DB and changing the criteria manualy?
My normal Job is it: 1) I Work all the time in Excel 2) At the end of the work in Excel, I need to open Access 3) Open a query (Called "MyQuery") 4) Change one parameter the Date: Between 01/10/2008 and 30/10/2008 (This for each month) 5) Run the query
I looking to get rid of points 2) to 5) by replacing with a Command button on an Excel sheet
Dim mydbase As Object Set mydbase = CreateObject("Access.Application") mydbase.OpenCurrentDatabase ("C:My doucmentsDB1.mdb")
mybase."MyQuery"."Date Criteria" = Between (Worksheet("Sheet1").Range("A1").value) and (Worksheet("Sheet1").Range("A2").value)
>>>>>The above line of code I have problems to get right!
I am not sure how to setup the initial connection to the datbase from excel and was wondering what would be the best way to go about things. Is it possible to run the query stored in the database and pass it a value or would I be better off just coding it into a sqlstring within the macro.
Here is the query that is in the database...when run it asks for the "Status?" variable.
SELECT ordernumber, mobilenumber FROM bookings WHERE status = [status?];
So yes, really simple query but yeah just want to know how to pass it that variable from excel or can I just set it up in the actual macro to maybe read the status from a cell?
I need to create a new query that pulls data from a 2007 Access database into Excel 2007. When I invoke the 'From Microsoft Query' option after 'Data/From Other Sources', and then select 'MS Access Database*', the only file type presented is '*.mdb' . However, I need to pull from an '*.accdb' file type. I have both Office 2003 and Office 2007 installed.
I have an excel file that imports data from an access database. Now the user wants the database password protected I edited my code to include the line "user ID=admin;password=risk;" but I'm getting an error message stating: "Cannot start your application. The workgroup information file is missing or opened exclusively by another user."
I'm bothered because I did not create a workgroup information file. I just want a password on the database I did not create users and groups.
Note this code works fine without the password protection and the added line.
Dim rsData As ADODB.Recordset Dim szConnect As String Dim szSQL As String
I have a database that has outgrown excel (over 77,000 rows now) so i now have it in Access. I want to replicate the following situation I used to have using lookups in excel with a query to the Access database: Paste a list of identifiers into an excel sheet. Values corresponding to the list are returned from the database in adjoining columns. The list can be from 10 to 300 cells long an returns data in 14 columns. I have had a go with the Import external data wizard which generates a query but have not been able to work out how to base the query on a list of cells in excel and have the query return values for each of the identifiers in the list.
Need the query parameters which takes the date from the cell into the query. How should I modify my query if it needs to take the date from a cell?? The bold one date should be picked from one of the cell in sheet 2.
My query is this WEB 1 http://fc-web-phl1-101.phl1:8090/gp/...runReport.y=12
I have an Access table which has following fields:
ScanDate Number DataType Type Number Type1 Number Type2 Number BatchNo Number Cases Number Pages Number
Now I have a useform in Excel so that when the user selects the Date from the combobox then it should check for total batch numbers (Count(BatchNo)), total cases (Sum(Cases)),Total Pages(Sum(Pages)) where ScanDate= Date from the combobox group by Queue Number. The Queue Number consist of Type+Type1+Type2.
See attached the Excelsheet where the data should be populated to. WBCount.xls
I've about 10 pivot tables in Excel that are populated via an External Query link to Access. In each case I have pre-written views with all the columns I need so that the query can just pick them up. Nine of the ten queries work perfectly, but one doesn't - reporting "Too Few Parameters - Expected 1" when I try and click on the "Return Data to Excel" in the import wizard.
I can see the column headers in Excel to select; so I'm assuming that it can parse the SQL but no results are being returned. Just to confirm though - results are returned (>8000 of them) in Access.
SQL code below:
Code: SELECT z.pathdurationhours AS PathHours, Count(z.pathdurationhours) AS Paths, Count(z.pathdurationhours)/(select count(*) from (select [activity date], [conversion ID], count(*) from tbl_dfa_p2cdata group by [activity date], [conversion ID]) ) AS PCT FROM (SELECT a.[activity date], a.[conversion ID], val( max(a.[interaction time])-min(a.[interaction time]) ) *24 AS PathDurationHours FROM tbl_dfa_P2CData AS a WHERE a.[interaction time] "" GROUP BY a.[activity date], a.[conversion ID]) AS z GROUP BY z.pathdurationhours;
I use Office 2010. I have an Access database that goes out and runs various queries from our systems of record. It then takes the data and dumps it into an Excel file. I have taken the info and created a file the grabs the raw data, converts it into Pivots and then Charts. All info is automatically updated however the size will change depending on what department is quering the data. It is really all done with a click of a button. I have tried to merely uncheck the "(blank)" but it comes back everytime the report is ran.
I have a csv file on another drive on the network that i need to query. I believe that ms query would be the best way. I know that a DSN needs to be setup but this macro will be used by various users who wont know how to do that. thus I would like to create one via VBA every time the task needs to be run. I haven't a clue how to do this and i need it to be explained to me in general terms with words of one syllable!
I have an Excel spreadsheet with a query to an Access table. The query pulls data from 2 columns in a table and pastes it to the spreadsheet. I am trying to update the VBA a little on one sheet and now I get the attached error whenever the code tries to run in Excel. Here is the code with the offending portion separated at the top.
I created an Ms Excel Database Query to bring in data from MS Access. (versions 2002 of MS Excel and Ms Access). The query works fine initially. I can right click, choose Edit Query and change my criteria. Results are returned almost instantly.
My problem is that, once I save the workbook, or autosave happens, I get an error when I right-click to Edit Query: This query cannot be edited by the Query Wizard..
I created a slick little excel sheet with the data coming in automatically via Access query. It has been working fine for months. Now all of the sudden there are a bunch of cells with missing data. The weird part is it's not as if whole columns are missing data, more like 90% missing. When I go to Access and run the query all cells are populated as the should be. There have been no changes to the query at all during this time.