My macro asks for a user input in DD-MM-YY format (which is the same format of all cells in the Excel worksheet).
I then instruct the macro to paste the string into cell A1 in 'TEST' sheet.
However when it pastes in the format is MM-DD-YY with the user input DD being the worksheet MM etc.
For example 06-04-14 becomes 04-06-14.
My code is below:
[Code] ......
Attached File : TEST.xlsm‎
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date
Dim projEndDate As Date
Dim DateStart As Date[code]....
I'm using nested SUBSTITUTE formula to make some changes to the some of the data. I'm also using IFERROR to return the input if it does not find the criteria I have specified. I have lot of variations in my input data.
The formula works fine for all except for date format input.
Sample:
N90232Y09--->SUBSTITUTE(A1,"N","")-->90232Y09
12335--->12335
12/3/1923---->58936 (I want the date to be retained)
why the date format is changed even if don't specify any changes for it. I expect my IFERROR to just retain the input as it is.
I am trying to check a user input to see if the user has entered the date correctly. I am using the code below but it keeps giving me a "Type Mismatch" error.
View 2 Replies View RelatedI need to compare the date from the user input and the date listed on excel. How can I compare it? Is it correct? lngCmp = Val( Cells(I, 31))
Dim lngBegin As Long, lngEnd As Long, lngCmp As Date, lngResults As Long
lngBegin = 9 'beggining of data
lngEnd = 232 'end of data
lngCmp = InputBox("Please enter the date", "Begining of the week")
Lngcmp1 = DateAdd("d", 1, lngCmp)
lngCmp2 = DateAdd("d", 2, lngCmp)
lngCmp3 = DateAdd("d", 3, lngCmp)
lngCmp4 = DateAdd("d", 4, lngCmp)
lngCmp5 = DateAdd("d", 5, lngCmp)
'lngCmp1 = lngCmp + 1
'lngCmp2 = lngCmp + 2
'lngCmp3 = lngCmp + 3
'lngCmp4 = lngCmp + 4
'lngCmp5 = lngCmp + 5
lngResults = 0
lngResults1 = 0
lngResults2 = 0..................................
I have a cell (C16) that has a date format (such as 08/28/2014). I want the value of this cell to be "N/A" when cell C7 is "No". When C7 is "Yes", I want Excel to prompt the user to enter a date for C16 when they click on C16. The formula for cell C7 is =IF(C3="No","No","Yes"). That's where the value of C7="No" comes from. If I didn't need a date for the value of C16, the formula would be something like =IF(C7="No","N/A","______"). I have just recently started trying Excel macros due to a tool
View 9 Replies View RelatedI have a work book.
In column C27 and down, the user can input a date.
In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
Formulas are below.
Code:
=COUNTIFS('Aff MFR'!C27:C1663,">="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"
I have an input box that requires the user to enter a date or accept today's date, which is the default, and when they click ok it is entered in cell "Data!D25". I want the format to be "yyyy-mm-dd". I have set the cell "Data!D25" to automatically use this format if I type the date directly into the cell by typing "yyyymmdd" without the dashes but when they type in the input box without the dashes, the result in the "Data!D25" cell is "############".
How can I correct this?
Code:
Sub PrintForms()
' Dim StartRow As Integer
' Dim EndRow As Integer
' Dim Msg As String
' Dim I As Integer
[Code]...
I have designed a spreadsheet to calculate time and speed averages of a ships voyage. When using a date and time value entered into a input box the value in the cell is reversed form the U.K date format to the U.S date format. this has been causing great amount of fustration to me. the cell has the correct date format i want and the excel system is configured to the U.K format. my program to allow you to look at it my knowlege is not very good of VBA. When entering the date in the FAOP from the drop down menu as dd/mm/yy hh:mm in is reversed.
View 2 Replies View RelatedI have the following code to ensure user inputs date in correct format, but on test it doesn't capture if they enter 11.12.08 (Which we have had people do before), if that is entered the textbox returns 30/12/99, is there a way I can prevent this?
Private Sub txtStartDate_Exit(ByVal Cancel As MSForms.ReturnBoolean) 'Checks Start Date is in correct date format
If IsDate(txtStartDate.Value) Then
txtStartDate.Value = Format(DateValue(txtStartDate.Value), "dd/mm/yy")
Else
MsgBox "Please enter a valid date format."
Cancel = True
End If
End Sub
I've been struggling with this for a while now and can't believe how hard it is!. I've searched on this site and on others to get some clarification but to no avail.
It's pretty simple really. I have a user form which contains a tex box for a user to input the date I want the format to be dd/mm/yyyy but can't find out how to set the format of the text box to this.
I have cobbled together (borrowing from examples I have found online because I don't know VBA) a form which inserts a date into a spreadsheet.
The trouble I have is that this date field is in USA date format and I need UK.
If I enter 03/01/2009 into the form, it appears in the spreadsheet as 01/03/2009. I have formatted these cells to display the month only and because of the way it was entered, the next column displays MAR instead of JAN.
Can I validate the input value in a form?
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I have a input box that prompts a user to enter a date of a new month - it has to be the 1st of a new month. I have validation that it is a date that has been entered but then i want to validate the date entered is a month ahead of a date in a cell range on a sheet.
It is a monthly reset so it has to roll on from the previous month.
Here is what i have currently but it isn't working.
Code:
' Get user to input the first day of the new month to populate all dates with
dNewMonth = InputBox(Prompt:="Enter first Day of the new Month. Must be the 1st of the Month e.g. 01/10/2012", _
Title:="Enter Date")
' Validates the entered date is a valid date
If (IsDate(dNewMonth) = False) Then
[Code]...
I have a workbook that I'm using to tracking staffing patterns within a mental health agency. When the workbook opens the user is asked to pick a date range and an office location. I've placed code into the userform that pre-fills the "start date" with today's date and the "end date" 7 days from today's date. I would like the user to be able to enter a unique date range should they wish but I have yet to figure out the coding to accomplish my goal.
[Code] .....
Attached File : Staffing Report 1.90.xlsm‎
I am looking for VBAS code to validate a date when a user enters a date. The date format must be in format dd/mm/yyyy for eg 16/05/2014 , 13/06/2014 etc
If date not in this format msgbox to advise user date format invalid
I have a userfrom with a text box which is used to receive a telephone number from the user. The 'Event' code that checks the formatting of the telephone number is "tbCustTel_Exit". If my user enters a format other than what is acceptable for a tel number, they get an error message telling them to re-enter.
My problem is they still end up EXITING that text box they made a mistake in? How can I override them exiting the text box if they make a mistake - and keep them in the text box so they can try and re-enter the tel number again?
I have a spread sheet with a date colume that reads: 2012-06-27-19 I need to have this read like 06/27/2012 but nothing I do is working I have tried to go to the formatting process and backing the hr:mm out and that doesn't work. I really don't want to go line by line to manually correct this issue.. HENCE ... over 2000 lines
Second question: If I have a column that reads 02/15/2012 and another column that reads 3/27/2012 how to a format a 3rd column to make it read total number of days between 1st date and 2nd date?
I have two questions regarding date format and hope you can provide input.
1) say 01/01/2010 displays as Jan-10 and i need a new column to state it as JAN. What function should i use to achieve it?
2) i need to state the difference between first day and last day of the month. What function should i use to achieve it?
I have been struggling with my Excel 07 Date format. Nearly every time I perform a calculation, enter in a value etc in a spreadsheet my answer is returned as a date. So for example if I enter in a cell: = 5 - 4. I get the answer "1-Jan-1900" instead of 1. I have to manually set the formats to general or number if I want the correct format. The setting seems to be the default one and occurs for all workbooks I open. What can I do to change this.
View 5 Replies View RelatedI have a list of dates stored via the following :
20100101 how can I convert this to date/time format to show 01/01/2010?
I have a program that exports the date as 20120621 (4 digit year, 2 digit month, 2 digit day). I have tried =datevalue(cell) but it returns #value!. I have tried =today()-(cell) and it also returns #value!. Is there a formula or something I can do to covert this field to a date?
View 3 Replies View RelatedI have a couple of columns, once edited need to update a table in SQL. This is my code
[Code] .....
However it is not taking UK date formats, it is assuming it is an american format, I get conversion of varchar data type to datetime results in an out-of-range value. What should I add to change the format? The format is in UK on the spreadsheet seemingly....
I'm in the military and for maintenance we use the Julian date the format goes as follows "09357" that is simplified as 09 = the year and 357= the three hundred and fifty seventh day of the year. so 09357= 12,23,2009..
so on to my question:
how can i make excel auto convert the julian date to the regular date and vice versa?
I have these as input entered as text:
January 01, 2011 January 01, 2011 February 28, 2010 May 12, 2011 June 02, 2010 February 28, 2010 May 12, 2011 June 02, 2010 February 28, 2010
but I need it in this DATE format:
MM/DD/YYYY
I need it as a formula to be entered into a cell in excel (not VBA)
Date:31-Oct-06 (the date is in cell A3)
Formula: "as at"& " "&A3
Result: as at 39021
I need the results to be "as at 31-Oct-06". Is there a formula for this??
I have two cells. Cell A1 contains ‘The date is ’ cell B1 is formatted in the date format, 2007-01-24. I need to concatenate these two cells so that on cell C1 I have ‘The date is 2007-01-24’ but whatever I try excel keeps on changing the date to a text value and hence I am left with: ‘The date is ‘This is the date'39141 or this is the date 39141. how to get to the result that I am after?
View 5 Replies View RelatedI've created a group of user forms used for recording jobs and displaying details of jobs and have come up against a problem I think you may be able to help me with.
When the user creates a new record, I've written some code to stamp txtdate text box with the current system date and this information is then copied onto a sheet called Data into a specific column.
This part works fine and as the column is formatted to handle dates it displays fine.
However, when I pull the data back in, it displays the date as the serial number date, not formatted as dd/mm/yy. I've tried every fix I can find to sort this but none of them seem to work.
The code I use to pull the data in is as follows:
ComboBox1.BoundColumn = 11
txtdate.Value = ComboBox1.Value
The idea is that the user selects a job number from combobox1 and then the appropriate column is pulled into each txt box on the form.
At the same time, I'm trying to do the same for the system time as well. Unsurprisingly I have a very similar problem here and use the same code as above. I've tried formatting both date and time txt boxes in the userform, the data transfer code etc etc with no success.
Is there a way to make a cell display today's date as YYYYMMDD?
Assuming data!a2= 7989, I need the following formula to display as shown below
="txt"&data!a2&"txt"&today
displayed as
txt7989txt20080507
I have a dataset where the dates are in the following format:
19970803 = 3rd August 1997 (YYYYMMDD)
My aim is to sort the data into months and into 'turn of the month' periods.
-Is there a way to isolate rows using a search term like "****08**" for all the august entries?
-Likewise if i want data between 27th-3rd for every month is there a way to sort for entries between "******27 - *******03".