I am trying to check a user input to see if the user has entered the date correctly. I am using the code below but it keeps giving me a "Type Mismatch" error.
View 2 Replies
i am writing a program that asks the user for an input and sets it equal to a variable.
i want to look thru a column for this variable, if it is not in it, then paste it at the end of the column. if it is in already, throw up a dialog box saying its already used and exit the sub.
i dont know how to set up this kind of thing up???
vlookup in combination with an if statement?
This is what i want to do: SEE ATTACHEMENT
•Write codes to pop up an InputBox to ask the user for a customer name.
•The program uses the user’s input to check whether the name is on the list. If it is, display an msgbox saying that the customer name is on the list, and the corresponding cell will be indicated in boldface and in blue. Otherwise, an msgbox will be displayed saying that the customer name is not on the list.
Dim the customer list as an array (string var. type) and Dim Found as Boolean. You will need the If-Then construction and For-Next or Do-While/Until loop too). Create a button to run and another to restore the formatting to its original style.
This is what i did so far and still having problems with it:
Option Explicit
Sub customers()
Dim Arr()
Dim R As Integer
Dim C As Integer
Dim ReturnColumn As Boolean
what I want. It relies on an input box asking the user to enter a part code, which when found creates a duplicate copy. However, if the user enters a part that doesn't exist I get a run-time error. Can anybody point me in the right direction so when a user enters an incorrect part they get a message telling them it doesn't exist.
Private Sub SortTest_Click()
Dim s As String
Dim r As Excel. Range
Range("A2").Activate
s = InputBox("Enter the number you wish to find")
If StrPtr(s) = 0 Then
MsgBox "You must enter an existing part number!"
Else
Set r = Cells.Find(What:=s, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)
Range(Cells(r.Row, "A"), Cells(r.Row, "AH")).Copy
Sheets("APL").Cells(r.Row, "A").Insert Shift:=xlDown
Application.CutCopyMode = False
Application.Goto Sheets("APL").Cells(r.Row, "H")
Selection.Offset(-1, -5).ClearContents
Selection.Offset(-1, 0).Select
End If
End Sub
I have a user form that has a combo box "City" two text boxes one called "Flight" and the other "Date". What I'm trying to do is to prevent the user from saving the data input from the user form if any of those three fields is left blank. The code that I have so far checks all of the required fields, if any are left blank a message notifys which field(s) is left blank and return the focus back to that field. But the rest of code also fires.
What I really need is either to stop the code if any fields are blank and return the focus back to the blank field, the user completes the field(s) and clicks the save again, or better yet, pause the code until all the required fields are completed and then complete the save. (There is actually another 200+ lines of code in this sub, but I deleted it to keep the post a little shorter.)
I would like to setup a macro that brings up a dialog box asking for a date in a specific column. Once that date is entered in the dialog box, the macro would then find all rows before that date (in that specfic column) and delete them.
View 9 Replies View RelatedWhat i want to do is copy all records from whatever date i enter, onto sheet test. The full excel file has over 80 worksheets for each individual rep, the example i attached has 8 sheets..
View 9 Replies View Relatedbased on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date
Dim projEndDate As Date
Dim DateStart As Date[code]....
want to do something simple, and it just wont paste. not sure why. anyone care to look it over and tell me what i'm doing wrong here?
'Insert Date Information
Dim vDate As Date
Range("D2").Select
ActiveCell.FormulaR1C1 = Date
vDate = Date
'Get date from user
Dim dDate As Date
vDate2 = Application.InputBox(Prompt:="Type in the due date for the location." _
& Chr(13) & Chr(13) & "*If you want the date to default to " & Date + 5 & " then leave the field blank.", _
Title:="Due Date", Type:=1 + 2).............
I have a cell (C16) that has a date format (such as 08/28/2014). I want the value of this cell to be "N/A" when cell C7 is "No". When C7 is "Yes", I want Excel to prompt the user to enter a date for C16 when they click on C16. The formula for cell C7 is =IF(C3="No","No","Yes"). That's where the value of C7="No" comes from. If I didn't need a date for the value of C16, the formula would be something like =IF(C7="No","N/A","______"). I have just recently started trying Excel macros due to a tool
View 9 Replies View RelatedI have a work book.
In column C27 and down, the user can input a date.
In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
Formulas are below.
Code:
=COUNTIFS('Aff MFR'!C27:C1663,">="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"
My macro asks for a user input in DD-MM-YY format (which is the same format of all cells in the Excel worksheet).
I then instruct the macro to paste the string into cell A1 in 'TEST' sheet.
However when it pastes in the format is MM-DD-YY with the user input DD being the worksheet MM etc.
For example 06-04-14 becomes 04-06-14.
My code is below:
[Code] ......
Attached File : TEST.xlsm‎
I am new to excel. I want to use Marquee in excel which takes user inputs from a message box and display those values in the web browser (found some old topics about web browser) untill we click the amend or new button.
View 6 Replies View RelatedI need to compare the date from the user input and the date listed on excel. How can I compare it? Is it correct? lngCmp = Val( Cells(I, 31))
Dim lngBegin As Long, lngEnd As Long, lngCmp As Date, lngResults As Long
lngBegin = 9 'beggining of data
lngEnd = 232 'end of data
lngCmp = InputBox("Please enter the date", "Begining of the week")
Lngcmp1 = DateAdd("d", 1, lngCmp)
lngCmp2 = DateAdd("d", 2, lngCmp)
lngCmp3 = DateAdd("d", 3, lngCmp)
lngCmp4 = DateAdd("d", 4, lngCmp)
lngCmp5 = DateAdd("d", 5, lngCmp)
'lngCmp1 = lngCmp + 1
'lngCmp2 = lngCmp + 2
'lngCmp3 = lngCmp + 3
'lngCmp4 = lngCmp + 4
'lngCmp5 = lngCmp + 5
lngResults = 0
lngResults1 = 0
lngResults2 = 0..................................
What I am looking to do is search using a user input and select all the rows that contain the entered search text.
I have 4 sheet workbook, columns are the same across them all, and what i require is to be able to take a text input from a user, maybe what column to search, and in what sheet. Then search the relevant sheet for matches. Once found the record that contains the match is to be copied to another sheet where filters can e applied. There will be multiple records selected for each search.
Is there a way to save items into memory to be recalled in userforms.
Let's assume that I have a userform called UserForm1 and three textboxes named TextBox1, TextBox2 and TextBox3.
I'm having a problem creating a Reset All command button that will remove user entered unlocked cell values from an entire workbook save for one specific worksheet. So for example, I have five tabs labeled as "DTF", "Week 1", "Week 2", "Week 3" and "Week 4". I want one single command button (placed in the "DTF" worksheet) to remove all of the unlocked cell values from "Week 1" to "Week 4".
View 9 Replies View RelatedI am using the following code which works fine:
'Checks user name before opening
UN = Environ("USERNAME")
If UN = "lemons" Then
Sheets("Title").Select
Range("a1").Select
Else
ActiveWorkbook.Close
End If
But when I change the code to check for more than on user as shown, I am getting a complile error.
'Checks user name before opening
UN = Environ("USERNAME")
If UN = "lemons" Then
Sheets("Title").Select
Range("a1").Select
If UN = "LEMONS" Then
Sheets("Title").Select
Range("a1").Select
Else
ActiveWorkbook.Close
End If
I need to add or a better way to check the user name
How do I pause my macro until the user selects a chart in the worksheet? Or Keep prompting a message to the user till he selects the chart and when a chart is selected run the macro.
Step 1: Check if a chart is Selected
Step 2: If yes, run the macro
Step 3: If no, prompt the user with a msgbox of Retry/Cancel.
Step 4: If the user selects Retry, wait till he makes a selection.
Step 5: If the selection is a chart, run the macro. If the selection is not a chart prompt the same msgbox again and keep looping it till he selects a chart.
Sub test5()
Dim chtSelected As Chart
Dim UserResponse As Integer
On Error Resume Next
Set chtSelected = ActiveChart
[Code] .....
I would like to do a Macro which requires user to go to a specific line which is variable in each work sheet. I would like to be able to enter the number and then delete all lines below that point and then continue with the balance of the macro.
Is there an easy way to pause the Macro and then restart it? Or is there a code that I can insert in the Macro to locate a specific Cell and then delete all lines below the next line?
In my macro, I'm trying to use an input box to determine the factor to multiply another cell by. I also want to only allow entry of 6.0 or less, and only allow, (but not require), a single decimal place. Here's what I've got so far, but it's not working:
View 2 Replies View RelatedI would like to make a button on my toolbar that will let me autofill whatever cell I've selected down to whatever row I designate. I would like to have a user input where you put in the row number and it autofills whatever formula down to that row in the column selected.
I know how to do a normal autofill, but I don't know how to do a user input or have it input into the autofill process.
This code works fine if i use static ranges, but i would like the user to input the column in which the data is stored.
'Get data for the locations of the gaming license numbers needed for the comparison
varPlayerHost = InputBox("Please enter a single letter for the" + vbCrLf + _
"Column that the Player Host License" + vbCrLf + _
"numbers are in.", "Player Host Number Location", "H")
varHostLicense = InputBox("Now enter the column letter for the copied employee" + vbCrLf + _
"license numbers", "Employee License Number Location", "U")
'Set the ranges for the data to be compared
'This is where I am getting the error???
Set rRangeA = Range([varPlayerHost,1], Range(varPlayerHost, 65536).End(xlUp))
Set rRangeB = Range([varHostLicense,1], Range(varHostLicense, 65536).End(xlUp))
'The actual comparison and deletion of record that match the license numbers copied.
'When this function finishes you will be left with a spreadsheet that only has patron
'information left for the patrons that have an invalid host number.
For Each rCell In rRangeA
If WorksheetFunction. CountIf(rRangeB, rCell) > 0 Then
rCell.EntireRow.Delete
End If
Next rCell
This exact code is kicking an error
"Run Time error 1004"
"Method 'Range' of Object '_Global' failed"
Not quite sure where i went wrong.
If anything else is entered into the input box a message box (MSGbox) with a vbCritical button will appear with the following prompt "You entry (insert entry data here) is inccorect." I don't know the code for "insert entry data here".
View 4 Replies View Related I would like a cell to have user input. If there is no input then the cell should reference a value in another cell. My strategy was to use a formula in another cell to check to see if the user input cell was empty. If it was empty then the formula propagated the cell. If it had user inputted data then it stayed like it was.
Here is an example:
Begin Invent
1000
Gallons
End Invent
User input or
formula here
Gallons
Received
Gallons
Used
Gallons
I want the user to be able to input a value for the End Invent cell right below 1000. If there is no value I want that same cell to mirror the cell above it with the 1000 in it.
I want to administrate a short training test. The user has chooses a correct answer A-E, off a drop down menu. I want to set it up so the user can't answer multiple times until they choose the correct answer.
View 14 Replies View RelatedI have a cell which team members enter their team name in to. For example FR1 and RA5. I set up data validation to only allow four characters so they can enter RA10 FR15 etc. However I have now found some are entering FR 1 with a space between the team name and number. This then means my formulas further on are not picking up the cell correctly. How can I have the space between the FR and 1 removed automatically upon user input?
View 4 Replies View RelatedI need a cell to display a default value (something like "Input Here") which a user can overwrite with a value. When the value is erased, the cell should return to the default. Preferably, it'd be great if the cell reset to the default value whenever the workbook is opened as well (i.e. won't save the user's input value).
View 2 Replies View Related I am trying to build a user-friendly Excel database that takes the user's input from various cells and logs that data input by the user in successive rows to the side. Please see the screenshots of my current spreadsheet below:
Compressor Database.jpg
From the screenshot above, I would like for the user to input their data for the Date of Last Inspection, Current Hours, and check the boxes for any services they performed in the orange/pink "Input" box on the left. Currently I have the spreadsheet set up so that the orange/pink "input" areas recognize data put in to the yellow "Data Log" cells to the right. I am trying to get the yellow "Data Log" cell area to store the Date and Hours data put in by the user in successive rows like a database, but I am not sure how to do this. I was thinking of putting a button in the says "Log Data" which would, when clicked, store the data in the "Data Log" cells. I am unsure if I need to use a Macro or whether Excel has a simple, built-in function that can be used. Eventually I have plans for the "Date of Last _______ Change" Gray boxes, but would like to take this one step at a time.
I am not well versed in VBA and Excel Macros, and I am currently using Microsoft Excel 2007 (yes, I know it is old). I do have C# and Matlab coding experience, however I would like to do this in Excel to make it easier for the User as it is a well known program.
I want to present a user with a list that they can make a selection from and enter their selection in a cell. Sounds easy but.........
View 9 Replies View Related
