I am looking for VBAS code to validate a date when a user enters a date. The date format must be in format dd/mm/yyyy for eg 16/05/2014 , 13/06/2014 etc
If date not in this format msgbox to advise user date format invalid
I have a input box that prompts a user to enter a date of a new month - it has to be the 1st of a new month. I have validation that it is a date that has been entered but then i want to validate the date entered is a month ahead of a date in a cell range on a sheet.
It is a monthly reset so it has to roll on from the previous month.
Here is what i have currently but it isn't working.
Code:
' Get user to input the first day of the new month to populate all dates with
dNewMonth = InputBox(Prompt:="Enter first Day of the new Month. Must be the 1st of the Month e.g. 01/10/2012", _
Title:="Enter Date")
' Validates the entered date is a valid date
If (IsDate(dNewMonth) = False) Then
[Code]...
I have a userform (FrmComp) and in it i have several Textboxes. When i click on any of the textboxes the calender appears but how i i make the calender assign the date value selected on it to the last clicked on textbox? here's what i have:
View 2 Replies View RelatedI want to know if there is a function that enters the corrent date automatically. E.g., if I enter "3000" in B1, the result will be "2/9/2008" in, say, B2.
Can it be done?
See attcahed code. I need to add a line to the code so date picked by the user needs to be both weekday and not a day in the past.
e.i today : 20/06/2006
if user pick a date before today or a weekend date pivot table does not update.
Private Sub MonthView1_DateClick(ByVal DateClicked As Date)
Application. ScreenUpdating = False
If Weekday(MonthView1.Value, vbMonday) < 6 Then
With PivotTables("PivotTable1")
.PivotFields("DATE").CurrentPage = Format(MonthView1.Value, "dd/mm/yyyy")
End With
End If
Application.ScreenUpdating = True
End Sub
Is it possible that unless a user enters the value of Z5 into Z6, Excel will not continue, or allow any futher data to be entered, this after a user first selects a institution from a drop down list in H6, which will determine the value of Z5.
View 9 Replies View RelatedI have a workbook that I'm using to tracking staffing patterns within a mental health agency. When the workbook opens the user is asked to pick a date range and an office location. I've placed code into the userform that pre-fills the "start date" with today's date and the "end date" 7 days from today's date. I would like the user to be able to enter a unique date range should they wish but I have yet to figure out the coding to accomplish my goal.
[Code] .....
Attached File : Staffing Report 1.90.xlsm
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date
Dim projEndDate As Date
Dim DateStart As Date[code]....
I have a ComboBox on a UserForm. One of the fields that I fill in is a date.
After the date is entered I want to check if it's a valid date.
VB:
Private Sub cboEnterDate_Exit(ByVal Cancel As MSForms.ReturnBoolean)
' Make sure a valid date was entered, it must be in the format 2013/10/21.
On Error Goto ERR
'If Not IsDate(cboEnterDate.Value) Then
[Code] .....
ERR:
MsgBox "The date entered is not a valid date", vbInformation
Cancel = True
cboEnterDate_Enter
End Sub
The code:
VB:
'If Not IsDate(cboEnterDate.Value) Then
execute the If routine if I enter the date 2014/03/33
When I enter the date 2014/03/0001 it do not see it as an invalid date and exit the routine.
The code:
VB:
If Not IsDate(FormatDateTime(cboEnterDate.Value, vbShortDate)) Then
send the execution to the ERR routine if I enter 2014/03/33
When I enter the date 2014/03/0001 it do not see it as an invalid date and exit the routine.
How can I get the validation to catch the 2014/03/0001 as an invalid date as well.
I have a userform with 5 textboxes. Each textbox looks for certain kinds of user entry...my code has trouble in re-locating the cursor to the SAME textbox after rejecting the user entry. And BTW, ideally the text box would be highlited in this instance.
Private Sub TextBox2_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim okstop As Boolean
Dim yesno_continue As Boolean
Dim mytext As String
okstop = False
Do
TextBox2.SetFocus
TextBox2.SelStart = 0
mytext = TextBox2.Value
If Not IsDate(mytext) And mytext <> "" Then
TextBox2.Value = ""
yesno_continue = MsgBox("Please enter a date...try again?", vbYesNo)
TextBox2.SetFocus
Else
okstop = True
End If
Loop Until (yesno_continue = vbNo) Or (okstop = True)
End Sub
I have a form that will allow the user to type in a date. I need to take that value and validate that it is between 01/01/2007 and 10 years ahead of the current day.
View 4 Replies View RelatedIn my form I have the user enter in the current date in Textbox1. My program is designed only to work in 2009 so I want to check to make sure the 1) the date is in 2009 and 2) textbox1 is not empty. If it is empty then it displays a message box with "Not a Valid Date. Please Enter Date as MM/DD/YYYY. Date has to be in 2009" - this doesn't work. Second, if the date is outside of 2009 it is to display a meeage box saying "Date has to be in 2009".
Here is my current code which is not working.
Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If TextBox1 = vbNullString Then Exit Sub
If IsDate(TextBox1) Then
Else
MsgBox "Not a Valid Date. Please Enter Date as MM/DD/YYYY. Date has to be in 2009" ...
I've looked through the threads and while I have used Data Validation to stop duplicate entries, I want to also make certain that those entries are only Dates. In other words, if Cells A1:A10 are to contain unique dates, I use Data Validation with the Custom condition below; = COUNTIF($A$1:$A$10,A1)=1
If the user enters the same date more than once, an error message pops up. However, the user is not prevented from entering a range of dates in a cell such as "July 5-7". How can I validate that the date is entered only once AND the entry is a valid Date. With Data Validation it seems I can specify to allow a DATE with specific criteria, or the Custom, but I can't see how I can do both.
My macro asks for a user input in DD-MM-YY format (which is the same format of all cells in the Excel worksheet).
I then instruct the macro to paste the string into cell A1 in 'TEST' sheet.
However when it pastes in the format is MM-DD-YY with the user input DD being the worksheet MM etc.
For example 06-04-14 becomes 04-06-14.
My code is below:
[Code] ......
Attached File : TEST.xlsm
I need to compare the date from the user input and the date listed on excel. How can I compare it? Is it correct? lngCmp = Val( Cells(I, 31))
Dim lngBegin As Long, lngEnd As Long, lngCmp As Date, lngResults As Long
lngBegin = 9 'beggining of data
lngEnd = 232 'end of data
lngCmp = InputBox("Please enter the date", "Begining of the week")
Lngcmp1 = DateAdd("d", 1, lngCmp)
lngCmp2 = DateAdd("d", 2, lngCmp)
lngCmp3 = DateAdd("d", 3, lngCmp)
lngCmp4 = DateAdd("d", 4, lngCmp)
lngCmp5 = DateAdd("d", 5, lngCmp)
'lngCmp1 = lngCmp + 1
'lngCmp2 = lngCmp + 2
'lngCmp3 = lngCmp + 3
'lngCmp4 = lngCmp + 4
'lngCmp5 = lngCmp + 5
lngResults = 0
lngResults1 = 0
lngResults2 = 0..................................
I'm trying to create a dynamic array so that when a user enters the first sheet name via an input box, excel will know to select the other sheets with ending (2), (3), (4) etc.
Currently this code works only if there are 4 sheets present (as I set this way), anything lower/higher is out of range.
How do I make it so that it will select sheets if there are less than 4 sheets present?
I tried nesting, but I pretty sure this array needs redimming or something. Is ubound a better option?
I want to control what a user enters into a single cell based on others.E.g.
A B
1 20 500
2 50 500
3 75 500
4 100 300
Column A is a thickness and column b is a width what I want to happen if the user enters a thickness in cell D1 and a width in cell D2 I want an error to pop up if for instance the user enters 100 as a thickness to only allow a maximum of 300 in the width. likewise if the user enters a thickness less than 100 in cell D1 to allow him to enter up to 500.
I am trying to check a user input to see if the user has entered the date correctly. I am using the code below but it keeps giving me a "Type Mismatch" error.
View 2 Replies View RelatedPrivate Sub txttodaysdate_change()
txttodaysdate = Format(Now, "mmm/d/yy")
End Sub
when i use this code i wnat the date to automatically appear in the text box but it doesn't I have type something into the textbox then the current date appears,.
With the expiry date as currently set, the code should show the second message box but it shows the first instead.
Sub datechange()
Dim expiry As Date
Dim now As Date
'This line sets the expiry date as 1/5/2006
expiry = DateSerial(2006, 5, 1)
If now < expiry Then
MsgBox "Your subscription will expire in May 2007"
Else
MsgBox "Your subscription has expired"
End If
End Sub
If anything else is entered into the input box a message box (MSGbox) with a vbCritical button will appear with the following prompt "You entry (insert entry data here) is inccorect." I don't know the code for "insert entry data here".
View 4 Replies View RelatedI am trying to do is to make it so that users can enter data into my form (I have managed to create the form and am working on trying to figure out how to get the info entered into the form to appear in my worksheet) and then the data will cause the information to, basically, compile sentences that I want to appear in one of three cells at the bottom of the worksheet.
Essentially, at this point in time, the end goal is to make 3 cells that contain text. Eventually, this text will be indexed elsewhere, but that is for the next person to deal with. I am creating a prototype that I want to present as a process improvement.
So, when the user selects 3 in cell D7 I want the text "Customer purchased 3 Widgets at $20 each." to print in cell 82B.
I also want the user to be able to copy and paste some customer records from another program directly into a cell in the form that will just print (unchanged) into one of these boxes, too.
Lastly, I want the user to be able to select checkboxes that will, when selected, print a comment that will print in two of these boxes. For example, if the user selects yes for cell D26 then I want the text "Customer not eligible for free shipping" to appear in both cells C82 and D82.
Is there a way to set up a conditional format for several cells so that the cells are filled in with red until the user enters text in those cells??
View 5 Replies View RelatedFirst and foremost I would like to congragulate you on this wondeful piece of code in the below link...
The query was to get a future date excluding Fridays and Holidays...
http://www.excelforum.com/excel-work...rkingdays.html
I have a similar query and therefore I pasted this link...
I actually wanted to get a future date using a Dynamic two day off as my the offs keep on changing as well as incorporate Holidays and Leaves if any..
Now Holidays would be official Public Holidays and
Leaves would be taken by the employee..
The code needs to pick the Leaves + Holidays and different offs maybe even more than 2 offs...
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies View RelatedI have a userform where I want the user to enter the date (US Version)
I want them to enter 121311
I want the textbox which I am using to show 12/13/11 when they exit from it.
Here is my code i am using:
Private Sub mm_built_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim mm_date As Date
Me.mm_built.Text = Format(mm_date, "mmm/dd/yy")
End Sub
What shows when they exit the entry for the above is Dec/30/99
How do I get it to show correctly?
What I need is a Macro that will allow the user to enter a date (ex: 2/14/2008) and then look in column H for any dates prior to the user entered date and higlight the corresponding cell in Column A.
I created the macro below from one in another workbook of mine and when I run it, I get a Run-Time error '13' Type Mismatch. When I go to Debug this code is highlighted in yellow: lookVal = InputBox("Securitization Date")
How can this be fixed to accept a date entry in the Input Box?
Sub SecuritzationDate()
Application.ScreenUpdating = False
Dim lookVal As Long
lookVal = InputBox("Securitization Date")
For i = 2 To Range("H" & Rows.Count).End(xlUp).Row
If Range("H" & i).Value < lookVal Then
Range("A" & i).Interior.ColorIndex = 40
End If
Next i
Application.ScreenUpdating = True
End Sub
I need to let my users select their own start date for project work. All details so far are entered using a form. What methods are there?
View 9 Replies View RelatedI'm trying to workout how to take a known initial date a repeating frequency and work out the next due date from today.
Example
Initial Date :- 1st of January 2014
Frequency :- every 5 weeks
Current Date :- 9th of March 2014
Next Due date should be :-12th of March 2014 (if I worked it out correctly from my paper calendar)
I want to use a cell formula to do this for different initial dates and varying frequency periods (the frequency will always be whole weeks i.e. 1,2,3,4,5,6,7,8,8,10)