when I try to do this:
Private Sub Workbook_Open()
UserForm1.show vbnomode
End Sub
I get one of those "Excel has found an error and needs to close......"
and it crashes down
I am using Excel 2003.
It’s been working perfectly up until around an hour ago. However, now when I close Excel, I get compile errors.
These compile errors seem to be because Excel is trying to access controls in the workbook after it has closed. Since the workbook is closed, VBA can no longer ‘see’ the controls, and therefore it thows up errors.
I’m also getting a similar error on a Worksheets("DataExplorer").unprotect line, which seems to be because the worksheet isn’t there after closing.
These errors only occur when I close the whole excel application using the big cross in the top right. If I just close the workbook (using the smaller cross just below the big cross in the top right of excel), it doesn’t throw up these errors.
Just to clarify: all of the code runs perfectly when Excel is open. The errors are being thrown up for lines of code which run without problem until Excel is closed.
Why I receive a 400 error when the 'excel close' button is pressed in the attached sample.
View 2 Replies View RelatedI have created a macro that creates a powerpoint from excel in office 2010. I have followed all the required steps, like adding object library and all. but still many times the PowerPoint crashes at slide7, 8 or 9 and have to restart. I generally get the above given error.
Code:
Sub CreatePowerPoint()
Application.ScreenUpdating = False
'Macro Created by Pallavi NC (pallavi.nc@hp.com)
'Add a reference to the Microsoft PowerPoint Library by:
'1. Go to Tools in the VBA menu
'2. Click on Reference
'3. Scroll down to Microsoft PowerPoint X.0 Object Library, check the box, and press Okay
'First we declare the variables we will be using
[code].....
I am working with Excel 2010.
There are certain .xlsm files in our system (some have macros and others don't) which generate "Error: Source not Found" in the Edit Links dialog box when the Check Status button is pushed. However, the source location is correct, as you can click on Open Source and it will open the correct file.
For simplicity of explaining my issue, consider the following scenario. In my workbook "Corn Production Summary.xls_" I link to 2 source files: "Iowa.xlsm" and "Nebraska.xlsx" (Note: The extension of the summary file doesn't matter. This error happens regardless of what the summary is.)
When I open "Corn Production Summary" I am prompted to update values. I select Update and the file refreshes and recalculates appearing to have updated all values (i.e. no error messages). However, the values from Iowa.xlsm did NOT update and there was no error message indicating that the values didn't update.
To confirm this, I go to Data>Edit Links>Check Status in "Corn Production Summary" and I see that Iowa.xlsm has the "Error: Source not Found" error. I click on Open Source and once the file is open, my data in the summary file will update.
One work around was to do the following process (with the summary file closed):
1) Iowa.xlsm and Save As Iowa.xlsx (removing macros if needed)
2) Save As Iowa.xlsx as Iowa.xlsm (overwriting the file that is currently there and readding the macros)
3) Open the summary file and both Iowa and Nebraska work just fine now.
There are a lot of files like this, and because Excel doesn't prompt us that it isn't really getting the values from these certain .xlsm files we would have to search in "Edit Links" for each file to make sure that they really are updating.
Related to my thead here, is there a way that the Find dialog can be automatically closed after the find?
View 7 Replies View Relatedthe if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox.
the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0)
If Not IsError(res) Then
Me.txtClientID.Value = ws13. Cells(res, 7)
Me.txtNumber.Value = ws13.Cells(res, 7)
Me.txtDate.Value = ws13.Cells(res, 8)
'save client id as a variable
'Print to invoice------------------------------------------------------------------.....................
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
What I would like to do is to be able to open a second workbook from a user form, preform some work on it then save and come back to the same place in the original user form.
So in steps:
1 : user clicks command button to open user form
2: user then clicks on command button on userform that opens 2nd workbook via a yes / no message box, but closes userform on 1st workbook (would be ideal if this could stay open, but hidden)
3: user then does work on 2nd workbook,
4: userform on 2nd workbook saves then activates the 1st workbook and reopens the userform
This is where no matter what I try I cant get the command button on the 1st userform to be clicked automatically so the yes / no message box appears.
This is part of the code in the 2nd sheet commandbutton that saves / closes / opens
Code:
Unload Me
ActiveWorkbook.save
Windows("ABC.xlsm").Activate
Sheets("Request Sheet").Activate
Call Sheets("Request Sheet").ForceClickOnBouttonXYZ
Call UserForm1.CommandButton6_Click 'this is where I cant get it to work!!
Windows("xyz.xlsm").Close
ABC is the 1st workbook
xyz is the 2nd workbook
This is the code on the 1st workbook I use to call on the 2nd workbook
Code:
Public Sub ForceClickOnBouttonXYZ() Call CommandButton1_Click End Sub
I'm the final stages of testing a userform that, in response to a button click, copies certain cells from a big messy worksheet and pastes the relevant ones (based on user input) in a clean sheet. Suddenly, I started getting a 'divide by zero' error for the following line:
VB : UpCount = PickNum - 6 + ((PickNum / 12))
UpCount and PickNum are both declared as Double, though this shouldn't matter. UpCount is being assigned a value here for the first time, and PickNum varies from 1 to about 250 depending on input.
Obviously I'm only dividing by a constant here, which is VISIBLY not zero. This error only occurs for certain ranges of PickNum...something like 50-70. Interestingly, in trying to debug it, I added:
VB:
Msgbox(PickNum)
Msgbox(54/12)
...since PickNum was 54 as I was getting this error. Just dividing 54 by 12 ALSO got a div by zero error.
Perhaps I should mention I'm using VBA in Excel 2010 for Mac.
I having problem to determine the format value of dates that needs to be inserted in a Userform.
I have the following format in my userform for my Textbox:
[Code] ......
When I select the calendar in my userform that is set as follows:
[Code] .......
And select the first day of the month, it will always add the format as 05/01/2014 but if I select today’s date as example it will add it in the right format: 2014/05/26
I have included a sample to demonstrate the function of the calendar as I have declared it public as d in a module, therefore making the population of my userforms textbox easier to add information on dates.
Calendar.xlsm
If you add 2014/05/01 - 2014/05/26 and 2014/05/06 you will see where the system is having problem with the month and dates I guess the system confuses the two?
I need the format as follows: yyyy/mm/dd
I have a large userform (Main) that the users enter data into. At the end of the data entry the users click OK and the data is transferred to a spreadsheet. I then ask the users if they want to add another record. If they click "Yes" all is OK. If they click "No" the userform should close and another "switchboard" type userform should open.
My problem is that try as I might I cannot get the (Main) userform to close. It only does so after the switchboard closes.
If I don't load the switchboard, main closes without issue.
I have left out the bulk of the data transferred to the "data" sheet in the code below.
Private Sub Main_OK_Button_Click()
Application.ScreenUpdating = False
Sheets("Data").Visible = True
Sheets("Data"). Range("F2").Value = Surname.Text
Dim result As VbMsgBoxResult
result = MsgBox("Do you wish to enter another record?", vbYesNo + vbInformation, "Continue...")
If result = vbNo Then
Main.URN.SetFocus
Unload Me
Else
I have a function (courtesy of Walkanbach) to create a userform, very useful as it means I keep memory down as I can create the UF's as I go and tweak to suit.
I have been trying to get the userform to be removed when the user closes it. The close action in this case is the X button top right as this userform only has the userform itself and a listbox.
When I set the code for the event procedure it doesn't error, but nothing happens. The microsoft help pages seem to suggest that you can't remove a userform through vba, but I find that hard to believe. I've tried variations on the close procedure and all to no avail so far.
Dim xInt As Integer
With TempForm.CodeModule
xInt = .CountOfLines
.InsertLines xInt + 1, "Private Sub TempForm_Terminate()"
.InsertLines xInt + 2, "ThisWorkbook.VBProject.VBComponents.Remove TempForm"
.InsertLines xInt + 3, "End Sub"
End With
Is it possible to close a userform when you go to another worksheet?
View 9 Replies View Relatedis it possible to remove the default close (X) on a userform? Or maybe some code with a message to insist the user choose a option first
View 2 Replies View RelatedThe error that pops up has no information other than "File not found" in a dialog box with two buttons.
File not found (Error 53)
The file was not found where specified. This error has the following causes and solutions:
A statement, for example, Kill, Name, or Open, refers to a file that doesn't exist.
Check the spelling of the file name and the path specification.
An attempt has been made to call a procedure in a dynamic-link library (DLL) or Macintosh code resource, but the library or resource file name specified in the Lib clause of the Declare statement can't be found.
Check the spelling of the file name and the path specification.
In the development environment, this error occurs if you attempt to open a project or load a text file that doesn't exist.
Check the spelling of the project name or file name and the path specification.
For additional information, select the item in question and press F1 (in Windows) or HELP (on the Macintosh).
I have a macro which prepares a report for equipment. The macro is a recorded macro and it runs perfectly on my system but when i am trying to run that in other system getting an error message"Error 448:arugument not found".Which i marked in red.
My macro code is as follows:
Sub Anirudha()
Application.ScreenUpdating = False
Range("G2").Select
ActiveCell.FormulaR1C1 = "=MID(RC4,4,6)"
Range("G2").Select
Selection.AutoFill Destination:=Range("G2:G931")
Range("G2:G931").Select
Range("A2:F2").Select
I am trying to open an Add-In file (that I wrote) and I am now getting the following error "File Not Found". I am sure it has to do with a typo in the code or something.
However, I cannot get anything to open up so that I can see the VBA code. The spreadsheet itself does not contain any data, just the VBA project.
how I can get at the code to fix it?
I tried to upload the file, but it is too big for the requirements.
I'm using the following code in "ThisWorkbook" of a couple of different workbooks, and the problem occurs consistently with the code use regardless of which workbook...
Private Sub Workbook_BeforeClose(Cancel As Boolean)
ActiveWorkbook.Close False
End Sub
The code itself does exactly as it should (not save changes when closing), but shortly after the workbook has closed, any other open workbooks will freeze, then give a popup message saying an error has occurred and a log is being generated, and EXCEL shuts down (loosing any other work)...
I have searched my HDD and only found 4 .log files that reference dates that coincide with the errors, although the times don't match(?)...
Originally Posted by WinMgmt.log
(Fri Oct 27 08:12:29 2006) : core is being shut down by WinMgmt.exe, it returned 0x0
Originally Posted by wmiadap.log
(Fri Oct 27 08:17:54 2006) : Performance library winspool.drv will be ignored as it was previously disabled (WbemAdapStatus = -1).
Originally Posted by wbemcore.log
(Fri Oct 27 08:47:10 2006) : Core physically unloaded!
Originally Posted by gotomon.log
Log file started at Fri, 27 Oct 2006 08:17:46 Eastern Daylight Time
0:00:00 i: G2EnumPortsCore() -- start -- level=1 pPorts=0x0
0:00:00 i: G2EnumPortsCore() buffer available:0 buffer needed:24
0:00:00 i: G2EnumPortsCore() -- leaving early --
0:00:00 i: G2EnumPortsCore() -- start -- level=1 pPorts=0xc55980
0:00:00 i: G2EnumPortsCore() buffer available:24 buffer needed:24
0:00:00 i: G2EnumPortsCore() -- leave --
I had been using;
Private Sub Workbook_BeforeClose(Cancel As Boolean)
ActiveWorkbook.Save True
End Sub
Which had the same error... when I changed it to Close, I thought it had been fixed, but it was just that the delay is longer before the freeze.
What I am trying to achieve is to get the UserForm to populate from information in the Database. In column AD I have a formula which produces a number when an item becomes due. I would then like label1 (lblReg1) to populate data from the same row in column A and label2 (lblDate1) from column S.
I then have a CheckBox (chk1) next to each pair of labels for the user to confirm the task has been actioned and when the CommandButton is clicked I would like the result placed in column AE in the corresponding row.
I have tried utilising code from another userform I have but I cant get it to work and I believe this is to do with the 'ActiveCell' reference as there is no Activecell (you can probably guess I am new to this). Example:
Sub UserForm_Initialize()
If Sheets("Database").Range("AD3:AD5000").Text = 1 Then
lblReg1.Caption = ActiveCell.Offset(0, -29).Text
lblDate1.Caption = ActiveCell.Offset(0, -11).Text
Me.chk1.Visible = True
End If
End Sub
(All the Labels are blank and will be filled hopefully by code, all the CheckBoxes are set to Visable = False at Initialize stage, I will be using Me.Height = ?? to expand the form to visible check boxes)
I have attached a small selection of my workbook where I have set up the userform and named the labels.
Can anyone amend the code to achieve the desired result or alternatively put me straight on the correct way to do this.
I've got a 'Control Panel' spreadsheet which is all based on UserForms. When a user clicks a particular button, it opens one of many separate 'Regional' sheets which they work in.
When the user closes the 'Regional' sheet, I would like the 'Control Panel' sheets userforms to show again. However I can find no way of doing this as it simply switches back to the 'Control Panel' sheet without loading the forms (as I had to hide the 'Control Panel' useforms to give them access to the 'Regional' sheet).
I have a User form which had a button which redirects me to a certain sheet, e.g. If I wanted to go to stock sheet I would click cmdViewStock and it would open the stock worksheet meaning it works, but the userform still stays open. Is there a way in which once I click the cmdViewStock it opens the Stock worksheet but closes the userform automatically straight after?
Here is the current code I have for the button:
Code:
Private Sub cmdViewStock_Click()
Sheets("Stock").Select
Sheets("Stock").Range("B4").Select
End Sub
most of the users always like to click the close (x) button on the top right of the userform ... and when that happens the application that was set hidden will remains hidden and other users in the network cannot access it ... eventhough i've placed an exit button inside the userform, users still prefer to click the x button.
View 5 Replies View RelatedI am not sure if this can be done or not. I am displaying a userform non-modally (Modeless). It will remain in place while the workbook is open. I know how to stop the form from being removed if the user clicks on the close box (the X in the top-righthand corner). What I would like is to stop the X displaying at all. I heard that it might be possible in the Properties box, but cannot see it in Excel 2000.
Even better would be if I could hide the entire header of the user form, so that I could simulate the look of placing controls within an Autoshape. (I am producing a project for users of Excel 2000 onwards, and I understand that placing controls directly in a worksheet can cause problems in other versions, so I must use forms.)
I have a userform1 with 12 text boxes with values/text and on this userform there is a cmdbutton to bring up userform2 to change the values/text of the textboxes on the userform1, it changes all the values/text on all the textboxes on userform1, however I want it to save these changes when the 1st userform closes & then re-opens?? How do I do this??
I have a worksheet with several option buttons and until yesterday, I had no problem selecting them. But today, every time, I select a radio button, an error shows up stating "Cannot run Macro "Option Button_click. Macro is not available in this workbook or is disabled". When the user selects a radio button, text appears in Col B depending on what button was selected (using VLOOKUP). That stuff is still working fine. It's just as soon as I click a radio button, the error shows up.
Based on the radio button selected, user can add in information to the columns adjacent to it, and then click a button to store that information in some rows below. The code for that button is stored in the sheet module. I have tried enabling macros and disabling macros and no change has appeared. What I have noticed though is that yesterday, when i opened the workbook, a yellow bar appeared asking if I wanted to "Enable Content". Today, that bar didn't appear.
Anyone ever seen this error “File not found: VBA6.DLL” ?
This error happens when I press a button I’ve created in the sheet. Funny thing is that there are other buttons right beside this button and they all work just fine. I’ve checked the code and names of all the macros in the sheet.
I’ve recreated a different module and renamed the macro and attached the code to another button.
I manage to do a proper search and the return value is correct, but the problem is when I don't get the correct value excel gives me an error, what I can add to make the result just to give me MsgBox "Not found"?
Code below:
Set Ran = Worksheets(2).Range("A:A").Find(CompName, lookat:=xlPart)
If Not Ran Is Nothing Then
MatchRow = Ran.Row
MatchCol = Ran.Column
End If
I am getting a "Runtime Error 53 - File not Found" with the below code. I am trying to move xml files from one folder to another. The file exists as my other macro can access the xml files and extract the info. But I can't get the macro to move them! Removing the last slash in the folder address hasn't worked either.
HTML Code:
Public Sub move()
Dim MyFolder As String
Dim NewFolder As String
Dim MyFile As String
[Code] .............
I'm trying to write some VBA which will allow me to find certain instances of data across a number of different sheets and copy this into another sheet.
However if the sheet doesn't contain the data I'm searching for an error pops up and the macro dies, is there a way to search where if the macro doesn't find anything it skips to the next line?