Remove UserForm On Close
Dec 18, 2009
I have a function (courtesy of Walkanbach) to create a userform, very useful as it means I keep memory down as I can create the UF's as I go and tweak to suit.
I have been trying to get the userform to be removed when the user closes it. The close action in this case is the X button top right as this userform only has the userform itself and a listbox.
When I set the code for the event procedure it doesn't error, but nothing happens. The microsoft help pages seem to suggest that you can't remove a userform through vba, but I find that hard to believe. I've tried variations on the close procedure and all to no avail so far.
Dim xInt As Integer
With TempForm.CodeModule
xInt = .CountOfLines
.InsertLines xInt + 1, "Private Sub TempForm_Terminate()"
.InsertLines xInt + 2, "ThisWorkbook.VBProject.VBComponents.Remove TempForm"
.InsertLines xInt + 3, "End Sub"
End With
View 9 Replies
ADVERTISEMENT
Mar 2, 2008
I've found a link on OzGrid "How to remove the (X) CloseButton from Userforms" but I can't seem to get it to work with Excel 2003. The code looks like it was written for Excel '95, '97 and 2000.
View 6 Replies
View Related
Jul 4, 2012
What I would like to do is to be able to open a second workbook from a user form, preform some work on it then save and come back to the same place in the original user form.
So in steps:
1 : user clicks command button to open user form
2: user then clicks on command button on userform that opens 2nd workbook via a yes / no message box, but closes userform on 1st workbook (would be ideal if this could stay open, but hidden)
3: user then does work on 2nd workbook,
4: userform on 2nd workbook saves then activates the 1st workbook and reopens the userform
This is where no matter what I try I cant get the command button on the 1st userform to be clicked automatically so the yes / no message box appears.
This is part of the code in the 2nd sheet commandbutton that saves / closes / opens
Code:
Unload Me
ActiveWorkbook.save
Windows("ABC.xlsm").Activate
Sheets("Request Sheet").Activate
Call Sheets("Request Sheet").ForceClickOnBouttonXYZ
Call UserForm1.CommandButton6_Click 'this is where I cant get it to work!!
Windows("xyz.xlsm").Close
ABC is the 1st workbook
xyz is the 2nd workbook
This is the code on the 1st workbook I use to call on the 2nd workbook
Code:
Public Sub ForceClickOnBouttonXYZ() Call CommandButton1_Click End Sub
View 7 Replies
View Related
Jan 26, 2013
How would the attached file code be ammended to remove a blank row and then move all remaining rows below up one ?
Example: Open the attached file (Transport Log version 1). If you double-click in cell "X10" (for patient Abe Lincoln), the data for row 10 will be removed and written to Sheet #2. Closing the file and reopening, row 10 is empty with other rows below remaining. The goal is to move the data in rows 11 and 12 (and any subsequent rows that may be entered below those) up one row.
The above method would be an indication to users making subsequent entries to always use the first empty row below all existing data.
View 1 Replies
View Related
Apr 15, 2005
I have been deleting some VBComponents by using the .remove command and they get tagged for deletion but do not actually get deleted until after my VBA sub ends and control is returned to excel.
I would like to save the changes before control is returned to the user. I'm not really sure why the deletion is being held up until execution ends, it even waits until all calling functions have also finished their execution.
View 9 Replies
View Related
Oct 10, 2008
how you can remove the close 'X' on the title bar of a user form please? I have used this for a password input box but if the user selects the 'X' on the title bar then it closes the password box without them having to enter a password and allows them into the workbook.
View 2 Replies
View Related
Jun 11, 2008
I have an issue where users to a work book are selecting autofilter and then saving the document with rows filtered out, which I wish to prevent or at least warn them to remove the filter before allowing the save function.
The document is never 'Save As', it's always 'Save' from the toolbar icon.
They should be permitted to save the document, but only after this check has been completed and a message issued if the filter is on.
View 4 Replies
View Related
Aug 19, 2006
Is it possible to use a function that removes all toolbars upon opening the workbook and reinstates the same upon closing, the work book i am currently using does the following as described in the code. however the function is limited in that only toolbars stated in the code will be removed, if for instance there was an adobe toolbar, that remains on the screen. or is there a better way of going about this? On open:
Private Sub Workbook_Open()
Run ("CreatePReturn")
Run ("CreateProceed")
With Application
.CommandBars(" Formatting").Visible = False
.CommandBars("Standard").Visible = False
.CommandBars("Drawing").Visible = False
.CommandBars("Return").Visible = False
.CommandBars("Proceed").Visible = False
.CommandBars("Worksheet Menu Bar").Enabled = False
.CommandBars(" Chart Menu Bar").Enabled = False
.DisplayFormulaBar = False
.DisplayStatusBar = False
End With
With ActiveWindow
.DisplayHeadings = False
.DisplayHorizontalScrollBar = False
.DisplayVerticalScrollBar = False
.DisplayWorkbookTabs = False
End With.................................
View 4 Replies
View Related
Aug 5, 2008
I have a large userform (Main) that the users enter data into. At the end of the data entry the users click OK and the data is transferred to a spreadsheet. I then ask the users if they want to add another record. If they click "Yes" all is OK. If they click "No" the userform should close and another "switchboard" type userform should open.
My problem is that try as I might I cannot get the (Main) userform to close. It only does so after the switchboard closes.
If I don't load the switchboard, main closes without issue.
I have left out the bulk of the data transferred to the "data" sheet in the code below.
Private Sub Main_OK_Button_Click()
Application.ScreenUpdating = False
Sheets("Data").Visible = True
Sheets("Data"). Range("F2").Value = Surname.Text
Dim result As VbMsgBoxResult
result = MsgBox("Do you wish to enter another record?", vbYesNo + vbInformation, "Continue...")
If result = vbNo Then
Main.URN.SetFocus
Unload Me
Else
View 3 Replies
View Related
Apr 21, 2002
Is it possible to close a userform when you go to another worksheet?
View 9 Replies
View Related
Apr 23, 2006
is it possible to remove the default close (X) on a userform? Or maybe some code with a message to insist the user choose a option first
View 2 Replies
View Related
Mar 5, 2007
I've got a 'Control Panel' spreadsheet which is all based on UserForms. When a user clicks a particular button, it opens one of many separate 'Regional' sheets which they work in.
When the user closes the 'Regional' sheet, I would like the 'Control Panel' sheets userforms to show again. However I can find no way of doing this as it simply switches back to the 'Control Panel' sheet without loading the forms (as I had to hide the 'Control Panel' useforms to give them access to the 'Regional' sheet).
View 9 Replies
View Related
Mar 16, 2012
I have a User form which had a button which redirects me to a certain sheet, e.g. If I wanted to go to stock sheet I would click cmdViewStock and it would open the stock worksheet meaning it works, but the userform still stays open. Is there a way in which once I click the cmdViewStock it opens the Stock worksheet but closes the userform automatically straight after?
Here is the current code I have for the button:
Code:
Private Sub cmdViewStock_Click()
Sheets("Stock").Select
Sheets("Stock").Range("B4").Select
End Sub
View 2 Replies
View Related
Feb 6, 2007
most of the users always like to click the close (x) button on the top right of the userform ... and when that happens the application that was set hidden will remains hidden and other users in the network cannot access it ... eventhough i've placed an exit button inside the userform, users still prefer to click the x button.
View 5 Replies
View Related
Apr 18, 2006
I am not sure if this can be done or not. I am displaying a userform non-modally (Modeless). It will remain in place while the workbook is open. I know how to stop the form from being removed if the user clicks on the close box (the X in the top-righthand corner). What I would like is to stop the X displaying at all. I heard that it might be possible in the Properties box, but cannot see it in Excel 2000.
Even better would be if I could hide the entire header of the user form, so that I could simulate the look of placing controls within an Autoshape. (I am producing a project for users of Excel 2000 onwards, and I understand that placing controls directly in a worksheet can cause problems in other versions, so I must use forms.)
View 6 Replies
View Related
Jun 23, 2007
I have a userform1 with 12 text boxes with values/text and on this userform there is a cmdbutton to bring up userform2 to change the values/text of the textboxes on the userform1, it changes all the values/text on all the textboxes on userform1, however I want it to save these changes when the 1st userform closes & then re-opens?? How do I do this??
View 9 Replies
View Related
Sep 11, 2013
I have a list of 10 shops as a list box named lstitems i need the user to click one of the 10 shops and when they click the selected shop it tells the name they selected. then i require a Quit button that transfers the selected Shop to cell D3 & then closes the userform, but if they do not pick a shop it will ask them to pick one before it closes. so they must select or it will not close.
View 9 Replies
View Related
Sep 13, 2003
when I try to do this:
Private Sub Workbook_Open()
UserForm1.show vbnomode
End Sub
I get one of those "Excel has found an error and needs to close......"
and it crashes down
View 9 Replies
View Related
Feb 15, 2010
I have the following code in a simple userform containing only a label:
Private Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Private Sub UserForm_Activate()
DoEvents
Sleep 4000
Unload Me
End Sub
When I invoke this as a single macro in a blank workbook and immediately change focus by pressing ALT+TAB to enter NotePad the userform is shown and exits normally after 4 seconds.
However, when I issue this code from within a larger macro, and hit ALT+TAB to Notepad, the excel application hangs on the displayed userform until I click back into Excel.
If required, I can happily send you the code as an attachment.
View 9 Replies
View Related
Jan 31, 2008
I am trying to accomplish keeping userform data in the userform after saving & closing the workbook. I am not referring to saving the data in a worksheet. Is this possible?
View 3 Replies
View Related
Apr 6, 2008
I have a userform with a textbox in it. Once you type what you want in the textbox, you click on one of two buttons - either Accept or Cancel. It would be much neater if the userform would close when the user hits the carriage return in the textbox. Anyone know how this can be achieved? Kjartan Auto Merged Post Until 24 Hrs Passes;Doh never mind folks, I figured it out...
Private Sub Userform1Textbox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Userform1.Exit
End Sub
View 2 Replies
View Related
Jul 2, 2008
I have a calendar form opened by a control button on an excel userform. Is there a way of closing the calendar form as soon as a date is selected, leaving the initial form open?
View 4 Replies
View Related
Feb 17, 2014
I have this VBA set for a workbook_open event:
Public Sub Workbook_Open()
PromotionOrNewHireForm.Show
Sheet1.Select
End Sub
...which works, but I would prefer to have the form hide (or unload, exit, etc.) once the toggle button in that userform is first selected. I've tried a few things but none of them have worked. BTW, the userform has two toggle buttons, which run the following:
Private Sub ToggleButton1_Click()
Worksheets("Sheet1").Range("A4").Value = "Promotion"
End Sub
Private Sub ToggleButton2_Click()
Worksheets("Sheet1").Range("A4").Value = "New Hire"
End Sub
Also, once it closes, I'd like it to move on to the next macro depending on whether "Promotion" or "New Hire" is selected. Not sure if a workbook_change event is the best way to handle that.
View 1 Replies
View Related
Apr 15, 2008
I have a fairly elaborate close-down routine for my workbook.
1) Quit out of fullscreen (restore initial state of excel before saving)
2) Hide all sheets but one (enforces cant do anything unless macros enabled)
3) Automatically save without a prompt
4) Close the workbook
I've researched it well and implemented it to the point where it works, but only if the user clicks the excel application close button -- the "X" in the titlebar (hence not in fullscreen).
However, if I launch the process via a userform button click, then for some reason the
DisplayFullscreen = False, Sheets hiding, and save codes have no effect (fullscreen persists, sheets are not hidden, no file is saved) in the Workbook_BeforeClose() subroutine....
I repeat: all the above works fine if process was launched by "native" excel button, but does not have any effect if launched from a userform commandbutton. (?!?!) any ideas what's going on?
I'm including my code so you can get an idea how it's structured.... by it's pretty "by the forum" as far as I can tell...
Private Sub CloseButton_Click()
If(1) Then
'Method 1 - close directly from userform command button
With ThisWorkbook
'.RunAutoMacros (xlAutoClose)
.Close
End With
Else
'Method 2 - set a timer to call a function to perform
' "ThisWorkbook.close" in a function outside of the userform
CustMenuCloseTimer = Now + TimeSerial(0, 0, 2)
Application .OnTime CustMenuCloseTimer, "CustMenu_CloseAction"
End If
End Sub
View 3 Replies
View Related
Jun 18, 2006
I've created this simple form to add and remove data in a combobox
in a userform and i want to add and remove items
note: I've tried to do that but the new added items does't appear
next time i run my workbook
View 7 Replies
View Related
Dec 5, 2008
Excel 2003. UserForm. anyway to hide/remove the Close X in the upper right hind side of the Title bar of a user form?
View 2 Replies
View Related
Aug 1, 2009
I am using a user form to display a splash screen. In the user form, I have a picture that is being displayed as splash screen for 5 seconds and then it disappears.
I only want to display the picture in the splash screen.
I want to to remove the following three items from the user form:
1 - remove all borders
2 - remove the menu/caption bar
3 - remove the "x" button that allows user to close form.
View 7 Replies
View Related
Apr 1, 2009
Is it possible to take the headers of a UserForm. I mean the bit that can have a form name and the little cross on the top right hand corner.
View 2 Replies
View Related
Apr 25, 2006
how to remove the title bars on userforms? I cant work it out for the life of me.
View 5 Replies
View Related
Nov 17, 2009
Suppose I have a userform named myUserForm and a checkbox on it named myCheckBox. How on earth do I remove myCheckBox from myUserForm at run time? I've tried every which way I can think and I always get "error 444". Some things I've tried are:
myUserForm.Controls.Remove "myCheckBox"
myUserForm.Controls.Remove(myCheckBox)
myUserForm.Controls("myCheckBox").Remove
myUserForm.Controls.RemoveControls "myCheckBox"
I've put this in a standard module, the ThisWorkbook module, even in the myUserForm code module and each time it's the same error.
View 9 Replies
View Related
