UserForm - Format Textbox For Percentage Vs Decimal?
Dec 20, 2012
I have the following code
Code:
Private Sub ComboBox1_Change()
TextBox1.Text = Range("P" & UserForm1.ComboBox1.ListIndex + 3).Value
TextBox2.Text = Range("N" & UserForm1.ComboBox1.ListIndex + 3).Value[code].....
In TextBox3, the user will input a percentage as a whole number, IE: 5 for 5%, but when the update is made, it is writing the "5" as 500% and is writing 50 as 5000%.
If there is already a percent in the cell it calls up IE: 50%, it shows up in TextBox3 as .5%
View 1 Replies
ADVERTISEMENT
Jun 7, 2006
I have a column of cells with values - 0.2%, 0.32%, 0.22, 0.5 etc. The cells with % symbol are in ' Percentage, 2 decimal' format while the plain numbers are in 'General' format i.e. column contains cells in either of these formats. I need a macro where I can specify the column and it will select the cells with the % format, convert it to 'General' and multiply the result by 100 eg. 0.2% converted to 'General' becomes 0.002. When multiplied by 100, result is 0.2 i.e. is displayed without the % symbol.
View 7 Replies
View Related
May 17, 2008
I would like to do the following: * Format numeric cells (cells with a percent sign) to zero decimal places. I have a set of macros that I am combining to clean up a data set and these are two of many (removing blank lines, duplicates, blue/bold, etc.)
View 2 Replies
View Related
May 7, 2007
I have a textbox on a userform.
The textbox is populated with a number which is generated by a formula which is
the result of a "Select Case" module.
On some occasions, for instance when dividing 1000 by 3, I get a result with recurring decimals in this case 33.333333333.
Is it possible to make the "result" round to the nearest whole number?
The textbox is named "inDorW".
View 8 Replies
View Related
Oct 6, 2009
I am building a conversion calculator on a userform. There is a textbox I've named "UserPctOff" where the user enters their value. I've got a label that I'm using to record the converted value. I keep getting Type 13 Mismatch error.
Here is my code.
Private Sub UserPctOff_AfterUpdate()
UserPctOff = Format(UserPctOff.Value / 100, " Percent")
LabelMDRate = UserPctOff.Value / (1 - UserPctOff.Value)
End Sub
View 4 Replies
View Related
Jul 14, 2012
I need to change the backcolour of some textboxes on a userform that is populated with percentage figures from a sheet, ie:
10% (a positive percentage) textbox backcolour = red
-10% (a negative percentage) textbox backcolour = green
Below is some code showing my attempts up to now, but obviously I can't make it work.
VB:
Private Sub Textbox1_Change()
If Me.Textbox1.Value < 0 Then
Me.Textbox1.BackColor = vbGreen
Else
Me.Textbox1.BackColor = vbRed
End If
End Sub
View 5 Replies
View Related
Oct 20, 2008
I am creating a userform in vba with textboxes. Input (from user) into the textbox is copied to a worksheet in the workbook.
I one text box users will need to type numbers and in another they will need to type letters.
Can the textbox be formatted so it will only allow a number?
Can the text box be formatted to only allow text?
View 6 Replies
View Related
Apr 25, 2012
I've got a UserForm with 2 textboxes.
TextBox1 requires the user to enter a %.
I don't want the end user to do anything to TextBox2 (I've got it set to Enabled=False). I would like TextBox2 to populate in $$ format based on a formula : TextBox1 % x Range("Sales_Price")
I can get TextBox2 to populate correctly, but I can't get it to convert to $$ format. Everything I've come across uses the 'Exit' or 'AfterUpdate' event - but I don't think I can use these events since the User won't actually be doing anything to TextBox2.
View 1 Replies
View Related
Feb 28, 2008
I am using the following code to insert a $ for my txtbox. how can I add to it so that it will also show commas. For example if I type 35000, I want it to show $35,000.
Private Sub TextBox1_KeyPress(ByVal KeyAscii As MSForms.ReturnInteger)
If TextBox1.Text = "" Then TextBox1.Text = "$"
End Sub
View 9 Replies
View Related
Apr 3, 2012
How can I formate the date in a text box on a user form. I want the date to appear as follow: yyyy/mm/dd
View 2 Replies
View Related
May 12, 2013
A particular textbox in myuserform requires a displayed format of 000.000. I would like the user to enter a no less, and no more, than 6 digits. On tab, the textbox displays that value in the preferred format.
eg. enter 123456, TAB, results in textbox display of 123.456
I have tried ...
Code:
[Private Sub freq_AfterUpdate()
freq = Format(freq, "000.000")
End Sub
But this results in 123456.000
View 1 Replies
View Related
May 29, 2006
while trying to limit the user's input to a userform textbox to no avail. For example one textbox on the form should only be numbers and I therefore want to restrict the user to typing in a two digit code like 02 or 72 (not for calculations). Another textbox I only want to allow the user to input 6 characters in the format letter, four numbers and a letter. If the user inputs the wrong stuff a message box pops up and the focus is reset
View 8 Replies
View Related
Apr 23, 2008
I have a textbox in an excel userform and want the display to be formatted. When "9.1" is entered "9.100" shows either before or after going to the next textbox on userform. The code below is not working.
Private Sub UserForm_Initialize()
txtWaste = Format(Me.txtWaste, "00.000")
End Sub
View 6 Replies
View Related
Aug 3, 2012
I have a calendar userform that enters a date into a userform textbox in the format mm/dd/yy.
I am in the UK, so default date format is dd/mm/yyyy but i need it as above - mm/dd/yy
So, when I get a MsgBox to repeat Textbox1.Value (the date from the calendar object, formatted mm/dd/yy) and repeat it in format dddd mmmm dd yyyy, it reads the value not as I want it, mm/dd/yy, but as the usual dd/mm/yyyy - so instead of reading 08/01/12 as Wednesday August 01 2012 it is giving me Sunday January 08 2012 - even though in the cells on the worksheet that are populated from the textbox, the date reads correctly, so 08/01/2012 is indeed 1st August 2012 not January 8th 2012...
So it's the MsgBOx function reading the textbox in the userform wrong, and formatting makes no difference...
Can I fix this without changing my regional settings? Is there a way to set the region in vba then unset when leaving the program? I don't want to have to change regional, and anyway, the program will be used by others who won't know / want to do that.
View 5 Replies
View Related
Nov 11, 2009
On the attached example, there is a user form with a text box and an enter button.
What i want, is when i press the enter button, the value in the text box goes into cell B2 on sheet1 in the format of "?/???".
View 2 Replies
View Related
Jul 19, 2013
Is it possible to format a textbox on a userform so that it displays as time?
View 1 Replies
View Related
Apr 26, 2008
Is it possible to selectively format text in a textbox on a userform ie. to make some of the text bold, other parts underlined and other parts italic etc. The text which appears in my text box is entered automatically by a piece of code which extracts the contents of certain cells and arranges them in the text box as needed. I would now like to be able to display the text box with the text formatted so that its not just all in plain text.
View 4 Replies
View Related
Jun 5, 2014
I have a userfrom with 2 textboxes used for entering dates. would like to either force the user to enter the date as xx/xx/xxxx or have a calendar feature where they can select a date. I checked my 'additional controls' in my toolbox but do not see a calendar option.
View 1 Replies
View Related
Apr 28, 2014
I have userform1 where new data is inputed.
Userform2 is used for Edit purpose.
Both work fine.
I have Label which is visible if date in textbox is less than TODAY()..... ( which is textbox28).
Following is the code:
It will not work correctly due to date format of textboxes & cells??? Tried to resolve it but no success yet.
View 2 Replies
View Related
Oct 27, 2012
I have a userfrom with a text box which is used to receive a telephone number from the user. The 'Event' code that checks the formatting of the telephone number is "tbCustTel_Exit". If my user enters a format other than what is acceptable for a tel number, they get an error message telling them to re-enter.
My problem is they still end up EXITING that text box they made a mistake in? How can I override them exiting the text box if they make a mistake - and keep them in the text box so they can try and re-enter the tel number again?
View 6 Replies
View Related
May 26, 2014
I having problem to determine the format value of dates that needs to be inserted in a Userform.
I have the following format in my userform for my Textbox:
[Code] ......
When I select the calendar in my userform that is set as follows:
[Code] .......
And select the first day of the month, it will always add the format as 05/01/2014 but if I select today’s date as example it will add it in the right format: 2014/05/26
I have included a sample to demonstrate the function of the calendar as I have declared it public as d in a module, therefore making the population of my userforms textbox easier to add information on dates.
Calendar.xlsm
If you add 2014/05/01 - 2014/05/26 and 2014/05/06 you will see where the system is having problem with the month and dates I guess the system confuses the two?
I need the format as follows: yyyy/mm/dd
View 2 Replies
View Related
Aug 8, 2008
I am trying to create a unique sample code by putting together the values of other cells that a user will input. It's all working well apart from the last part, where I am trying to include a decimal number. I want the decimal number to appear without the central "." and in a four digit format. e.g. 2.5 would appear as 0250, 14.25 would appear as 1425. This is the formlua I am using currently:
=IF(ISBLANK(B4),"",IF(LEFT(C4,1)="w",(B4&"-"&TEXT(F4,"YYMMDD")&C4&TEXT(G4,"HHMM")),(B4&"-"&TEXT(F4,"YYMMDD")&C4&LEFT(TEXT(H4,"00"),2)&RIGHT(TEXT(H4,"00"),2))))
However, where the value of H4 is 2.5, I am getting a result of 0303 (I've put this part in bold). I have attached a small spreadsheet to aid understanding.
View 2 Replies
View Related
Nov 7, 2013
I have a source spreadsheet with a bunch of percentages as numbers, like this:
28.04
When I paste that into my end spreadsheet with its cell formatted as percentage, I get this:
2804
Which I understand why... I have been searching and all I can find to do is past special with the multiply operation (from a blank cell that contains .01) and then it converts them to the correct result, then I reformat the column as a percentage.
View 4 Replies
View Related
Jul 8, 2009
Is there a method to automatically convert a decimal to a percentage?
For example:
if given the value of 76.48, is it possible to automatically convert this to 76.48%? Formatting the cell as a percentage produces 7648%. I've tried everything I know and can't get the right result.
View 2 Replies
View Related
Sep 15, 2014
I had created a pivot table and pivot chart for the data, the pivot table shows the row label's as percentages which is correct, but it when comes to the pivot chart it shows it as decimal, for example a 10% shows 0.1, I tried of formatting the x axis and choose percentages but it doesn't want to change.
View 6 Replies
View Related
Jun 6, 2008
I have set up a form which requires one textbox to have a decimal followed by four numbers (ex .5780) and another which requires two numbers, a decimal, then two more numbers (ex 57.80). how this can be accomplished? I am new to Visual Basic coding!
View 6 Replies
View Related
Nov 21, 2012
I need to have textBox2. formatted to a number with 3 decimal places.
The code below is executed from the command button.
Code:
Private Sub CommandButton1_Click()
If IsNumeric(Me.TextBox1.Value) Then
Me.TextBox2.Value = Me.TextBox1.Value / 25.4
End If
End Sub
I found the code below but I cannot seem to figure it out
Code:
Private Sub TextBox2_Change()
TextBox2.Text = Format(Number, "0.000")
End Sub
View 2 Replies
View Related
Dec 2, 2006
How can I restrict entry into a textbox to 1 decimal place?
View 9 Replies
View Related
Oct 12, 2007
I have following for change event in text boxes to only allow numerics e.g.
Private Sub txtGBP10_Change()
If (Not IsNumeric(txtGBP10.Value) And (txtGBP10.Value <> "")) Then
txtGBP10.Value = Left(txtGBP10.Value, Len(txtGBP10.Value) - 1)
End If
End Sub
Private Sub txtShare10_Change()
If (Not IsNumeric(txtShare10.Value) And (txtShare10.Value <> "")) Then
txtShare10.Value = Left(txtShare10.Value, Len(txtShare10.Value) - 1)
End If
End Sub
Can I add some code so that the user can only add numeric entries to 2 DP (txtGBP) or 3DP(txtShare)
View 5 Replies
View Related
Dec 16, 2007
i have a combo boxes populated with fractions 1/16, 1/8, 3/16, 1/4 etc up to 15/16.
i just want to output the chosen fraction to a textbox as a decimal.
This is done in a userform, not in a cell.
View 9 Replies
View Related
