Link UserForm Label To TextBox As Percentage Calculation
Oct 6, 2009
I am building a conversion calculator on a userform. There is a textbox I've named "UserPctOff" where the user enters their value. I've got a label that I'm using to record the converted value. I keep getting Type 13 Mismatch error.
I want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
I tried the texbox & using the the controlsource from the properties window, this was only good for one result. for the next result the textbox won't change its value.
As i want this for display purpose only can i use the label for the above problem
I create a series of labels and text boxes at runtime.
Code: for x = 1 to 10 labelName = "label" & x Set cControlLabel = Me.frameScrollable.Controls.Add("Forms.Label.1", labelName, True) next x
How can I assign an on_click event to these? I have seen some rather complicated suggestions such as creating code for each possible object, but there could possibly be hundreds of labels created. It would be nice to be able to call the same macro from each label click, and then take action based on the .caption property of the label.
I need to write some code to update a label everytime the textbox data is edited. I have this code so far but it is returning an object error. NineV refers to the text box and and ninelabel refers to the label. This is the code:
Code: Private Sub NineV_change() Dim nivevalue As Integer ninevalue = (((GP / 31.1035) * 0.255) * NineV.Text) NineLabel.Caption = "£" & ninevalue End Sub
In TextBox3, the user will input a percentage as a whole number, IE: 5 for 5%, but when the update is made, it is writing the "5" as 500% and is writing 50 as 5000%.
If there is already a percent in the cell it calls up IE: 50%, it shows up in TextBox3 as .5%
I am creating a user interface for inputing info into a sales order, and then printing the sales forms already pre-filled based on the user's input. SO, I need the user to be able to type text into a textbox that is in a multipage control that is in a userform, and then have it automatically populate a specific cell in my workbook. Seems like this should be relatively simple, but I am just getting started with vba and can't seem to figure this out.
How do I refer to the contents of a userform's textbox on a worksheet?
The userform will be opened, edited, and closed by the user. I would like to be able to refer a cell on my sheet to that textbox so that they always have the same content.
I am building a userform which also needs to display current data from a cell in the most recent row of a worksheet. This current data and all userform selections are then to be written to a row in a separate worksheet. I have not been able to properly reference the current data; My (rookie) approach intended to set the ControlSource properties of a TextBox to the desired current data.
Private Sub CommandButton1_Click() 'Begin form ' find last gps reading
Dim LastRow As Long Dim Source As Worksheet Set Source = Worksheets("Sheet1") Set Dec = Worksheets("DecimalForm")
I'm trying to make a userform to edit cell A1. So, by pulling up a macro (with other content in there already), how do I display the value in A1, and also have a button to modify its value/change it.
I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code: Public Sub TotalCACost() If TextBox12.Value > "" Then Label685.Caption = ""
[Code]....
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
I have a drop down combo box with 4 options in (1, 2,3 and 4). Under this I have a label. What I want to do is have it so if I select, for example "2", then it says "D11 DJJ" In the label. The name of my CBO is CBOCarNum and the name of the label is LBLRegi
I have the following code written to check calculations. Now I would like to make one or another Label Visible depending on the value this code returns.
If TextBox57 = 0 then I want Label 7 to visible but if it doesn't I need Label 8 to be visible. I am starting both Labels hidden.
Possible to create a class that contains a textbox and a label?
I need something like a checkbox except instead of showing a check mark, it shows how many time the checkbox is clicked.
What I can think of is a combination of a textbox and a label. When the label is clicked, the number in the textbox increases (or decreases, depending on a pre-set condition) by one.
In the Defects sheet it should perform the autofilter by selecting the Criteria as Severity as Critical and Status as Closed and finally it should take the count of visible cells and it should populate value in the sheet1 (Percentage sheet) in the Critical defects closed field .
Again it should perform the autofilter by selecting the criteria as severity as Critical and status should (New,open ,reopen,retest ,pending closure)and finallu it should take the count of visible cells and it should populate value in the percentage sheet in the Unresolved defects field.
Now percentage calculation should be performed between the Critical Defects closed and Unresolved Defects.
Here is the formula= Critical defects closedUnresolved Defects * 100.
I am trying to get my variance percentage to calculate correctly but I am struggling when it comes to one of the value being zero. It works fine for the below example when both the variance and last year figures a zero.
In the attached table the fees generated are on a sliding scale and the total is the fee generated within these ranges
I would like a formula in b10 to give me the value based on the total sale figure, i.e. 80.00. I've searched the board and tried some very long "if" statements and "lookup" table but to no avail.
Is there a formula I could use to calculate the desired value, preferable using cell references and not the actual values.
I have two text boxes on a userform that are used to populate a label caption based on the textbox values. How do I set the label caption to update once a a textbox value is changed?
As an aid, I have a label at the bottom of the form and when a person tabs onto a textbox that labels then states what you are supposed to input into that textbox along with an example. When you tab onto another textbox the caption on the label changes to give another explanation and example.
I attempted to insert an if statement into the userform which states that if a textbox is enabled then the caption of the label = "Example"
If textbox1.enabled = True Then label1.caption = "Explanation 1, Example 1" If textbox2.enabled = True Then label1.caption = "Explanation 2, Example 2" End If End If
This is so simple, yet Excel doesn't give the correct value. So, here you go, I only have 2 Cells and 2 Labels. One Label for one Number and the other Label for the other Number.
For the Pie Chart I chose Cells:
Cell B36 with the number $54288 Cell B39 with the number $166113
By simply viewing this one can see one of the Percentages should be around 33% and the other 66%. However, Excel gives it a Percentage of 25% and 75%.
i am having a hard time in my microsoft excel class for the life of me i cannot think of a formula to answer the question below
every time i type in =(c3)-25-80% i get the wrong answer i know there has to be a different formula
Cost of visit= $113.00
Q=Your have a co-payment of $25.00 and the insurance will pay 80% of the remaining cost. Create a formula for the visit that will calculate the total amount you will have to pay.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
