Validating The Format Of A Userform Textbox
May 29, 2006
while trying to limit the user's input to a userform textbox to no avail. For example one textbox on the form should only be numbers and I therefore want to restrict the user to typing in a two digit code like 02 or 72 (not for calculations). Another textbox I only want to allow the user to input 6 characters in the format letter, four numbers and a letter. If the user inputs the wrong stuff a message box pops up and the focus is reset
View 8 Replies
ADVERTISEMENT
Feb 24, 2013
I have two userforms. When the user chooses the choice "Other" in the userform frmTradeSickOther, another userform called frmOther will be called. At this point, the user will enter some required comments in a textbox (called txtOther) and click the "Add Comment" button. If the user does not enter anything, a prompt will inform the user to type something in the textbox.
My problems: Once the user clicks okay to the prompt, frmOther is called back. When it's called back, I want the cursor to blink in the textbox. Eventhough I have SetFocus on the textbox, it does not work. I don't know why.How do I prevent the user from just hitting enter (i.e., accepting blank lines as comments) and bypassing the commenting part. The code below accounts for hitting enter once (i.e., one blank line), but not multiple times. How do I do this?
Here is what I have when the user clicks on the "Other" choice in frmTradeSickOther:
Code:
Private Sub optOther_Click()
Unload Me
frmOther.Show
frmOther.txtOther.SetFocus 'This gets the cursor to blink in textOther when frmOther is called.
End Sub
Here is what I have when the user clicks the "Add Comment" button on frmOther:
Code:
Private Sub btnAddComment_Click()
On Error Resume Next
txtOther.Value = Trim(txtOther.Value) 'This is to make sure spaces aren't accepted as a comment.
If Me.txtOther = vbNullString Then
Me.Hide
MsgBox "Please enter the necessary information.", vbInformation, "Required Field"
Me.Show
Me.txtOther.SetFocus 'Here is where I set focus on txtOther.
Exit Sub
End If
'Everything below is to add comments automatically to each cell when a value is changed.
Application.CommandBars("Cell").Controls("Delete Comment").Enabled = True
If Not ActiveCell.Comment Is Nothing Then
Application.CommandBars("Cell").Controls("Edit Comment").Enabled = True
Range(curCell).ClearComments
[Code] .......
View 4 Replies
View Related
Sep 17, 2006
I have the following codes in a new workbook that has nothing else in it:
Private Sub Textbox1_Change()
OnlyNumbers
Sheet1. Range("A1").Value = TextBox1.Text
End Sub
Private Sub TextBox2_Change()
OnlyNumbers
End Sub
Private Sub UserForm_Click()
End Sub
This works fine in this workbook, however, if I try to use it in a workbook that has a lot of macros & userforms it doesn't work at all!
View 4 Replies
View Related
Oct 20, 2008
I am creating a userform in vba with textboxes. Input (from user) into the textbox is copied to a worksheet in the workbook.
I one text box users will need to type numbers and in another they will need to type letters.
Can the textbox be formatted so it will only allow a number?
Can the text box be formatted to only allow text?
View 6 Replies
View Related
Apr 25, 2012
I've got a UserForm with 2 textboxes.
TextBox1 requires the user to enter a %.
I don't want the end user to do anything to TextBox2 (I've got it set to Enabled=False). I would like TextBox2 to populate in $$ format based on a formula : TextBox1 % x Range("Sales_Price")
I can get TextBox2 to populate correctly, but I can't get it to convert to $$ format. Everything I've come across uses the 'Exit' or 'AfterUpdate' event - but I don't think I can use these events since the User won't actually be doing anything to TextBox2.
View 1 Replies
View Related
Feb 28, 2008
I am using the following code to insert a $ for my txtbox. how can I add to it so that it will also show commas. For example if I type 35000, I want it to show $35,000.
Private Sub TextBox1_KeyPress(ByVal KeyAscii As MSForms.ReturnInteger)
If TextBox1.Text = "" Then TextBox1.Text = "$"
End Sub
View 9 Replies
View Related
Apr 3, 2012
How can I formate the date in a text box on a user form. I want the date to appear as follow: yyyy/mm/dd
View 2 Replies
View Related
May 12, 2013
A particular textbox in myuserform requires a displayed format of 000.000. I would like the user to enter a no less, and no more, than 6 digits. On tab, the textbox displays that value in the preferred format.
eg. enter 123456, TAB, results in textbox display of 123.456
I have tried ...
Code:
[Private Sub freq_AfterUpdate()
freq = Format(freq, "000.000")
End Sub
But this results in 123456.000
View 1 Replies
View Related
Apr 23, 2008
I have a textbox in an excel userform and want the display to be formatted. When "9.1" is entered "9.100" shows either before or after going to the next textbox on userform. The code below is not working.
Private Sub UserForm_Initialize()
txtWaste = Format(Me.txtWaste, "00.000")
End Sub
View 6 Replies
View Related
Aug 3, 2012
I have a calendar userform that enters a date into a userform textbox in the format mm/dd/yy.
I am in the UK, so default date format is dd/mm/yyyy but i need it as above - mm/dd/yy
So, when I get a MsgBox to repeat Textbox1.Value (the date from the calendar object, formatted mm/dd/yy) and repeat it in format dddd mmmm dd yyyy, it reads the value not as I want it, mm/dd/yy, but as the usual dd/mm/yyyy - so instead of reading 08/01/12 as Wednesday August 01 2012 it is giving me Sunday January 08 2012 - even though in the cells on the worksheet that are populated from the textbox, the date reads correctly, so 08/01/2012 is indeed 1st August 2012 not January 8th 2012...
So it's the MsgBOx function reading the textbox in the userform wrong, and formatting makes no difference...
Can I fix this without changing my regional settings? Is there a way to set the region in vba then unset when leaving the program? I don't want to have to change regional, and anyway, the program will be used by others who won't know / want to do that.
View 5 Replies
View Related
Nov 11, 2009
On the attached example, there is a user form with a text box and an enter button.
What i want, is when i press the enter button, the value in the text box goes into cell B2 on sheet1 in the format of "?/???".
View 2 Replies
View Related
Dec 20, 2012
I have the following code
Code:
Private Sub ComboBox1_Change()
TextBox1.Text = Range("P" & UserForm1.ComboBox1.ListIndex + 3).Value
TextBox2.Text = Range("N" & UserForm1.ComboBox1.ListIndex + 3).Value[code].....
In TextBox3, the user will input a percentage as a whole number, IE: 5 for 5%, but when the update is made, it is writing the "5" as 500% and is writing 50 as 5000%.
If there is already a percent in the cell it calls up IE: 50%, it shows up in TextBox3 as .5%
View 1 Replies
View Related
Jul 19, 2013
Is it possible to format a textbox on a userform so that it displays as time?
View 1 Replies
View Related
Apr 26, 2008
Is it possible to selectively format text in a textbox on a userform ie. to make some of the text bold, other parts underlined and other parts italic etc. The text which appears in my text box is entered automatically by a piece of code which extracts the contents of certain cells and arranges them in the text box as needed. I would now like to be able to display the text box with the text formatted so that its not just all in plain text.
View 4 Replies
View Related
Jun 5, 2014
I have a userfrom with 2 textboxes used for entering dates. would like to either force the user to enter the date as xx/xx/xxxx or have a calendar feature where they can select a date. I checked my 'additional controls' in my toolbox but do not see a calendar option.
View 1 Replies
View Related
Feb 7, 2014
i am trying to make a user form with two msg boxes (To and From Date). In excel spreadsheet It was rather easy to bring a popup msg if they were invalid under some stated rules. see below a rationale of the rules where A3=From Date and B3 To Date and the desired outcome of is:
[Code] .......
So i wonder if it is possible to make a VBA code to validate these two dates? and bring a warning msg after keypress or after pressing submitcmd or any other available if available.
View 3 Replies
View Related
Apr 28, 2014
I have userform1 where new data is inputed.
Userform2 is used for Edit purpose.
Both work fine.
I have Label which is visible if date in textbox is less than TODAY()..... ( which is textbox28).
Following is the code:
It will not work correctly due to date format of textboxes & cells??? Tried to resolve it but no success yet.
View 2 Replies
View Related
Oct 27, 2012
I have a userfrom with a text box which is used to receive a telephone number from the user. The 'Event' code that checks the formatting of the telephone number is "tbCustTel_Exit". If my user enters a format other than what is acceptable for a tel number, they get an error message telling them to re-enter.
My problem is they still end up EXITING that text box they made a mistake in? How can I override them exiting the text box if they make a mistake - and keep them in the text box so they can try and re-enter the tel number again?
View 6 Replies
View Related
May 26, 2014
I having problem to determine the format value of dates that needs to be inserted in a Userform.
I have the following format in my userform for my Textbox:
[Code] ......
When I select the calendar in my userform that is set as follows:
[Code] .......
And select the first day of the month, it will always add the format as 05/01/2014 but if I select today’s date as example it will add it in the right format: 2014/05/26
I have included a sample to demonstrate the function of the calendar as I have declared it public as d in a module, therefore making the population of my userforms textbox easier to add information on dates.
Calendar.xlsm
If you add 2014/05/01 - 2014/05/26 and 2014/05/06 you will see where the system is having problem with the month and dates I guess the system confuses the two?
I need the format as follows: yyyy/mm/dd
View 2 Replies
View Related
Jul 3, 2014
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
View 3 Replies
View Related
Feb 2, 2010
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
View 11 Replies
View Related
Jul 25, 2014
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
View 1 Replies
View Related
Oct 12, 2011
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
View 1 Replies
View Related
Jul 27, 2014
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies
View Related
May 23, 2008
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
View 3 Replies
View Related
Apr 26, 2014
I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
View 2 Replies
View Related
Nov 22, 2007
I want to populate a textbox (output) on one userform with data from a textbox (target) on another userform.
The data in the textbox (target) is the result of calculations in the userform code and is not gathered from or saved to a cell.
I want the textbox (output) to be populated at "Userform intialize" event.
I have tried various other methods without any success.
View 9 Replies
View Related
Aug 10, 2009
I have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
View 2 Replies
View Related
Aug 23, 2009
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”.
I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
View 9 Replies
View Related
Jan 16, 2006
How can I set the format of multiple textboxes to numberformat "#,##0.00#,##0.00)"?
View 9 Replies
View Related
