Change Userform Textbox Back Colour If Contents Are Percentage
Jul 14, 2012
I need to change the backcolour of some textboxes on a userform that is populated with percentage figures from a sheet, ie:
10% (a positive percentage) textbox backcolour = red
-10% (a negative percentage) textbox backcolour = green
Below is some code showing my attempts up to now, but obviously I can't make it work.
VB:
Private Sub Textbox1_Change()
If Me.Textbox1.Value < 0 Then
Me.Textbox1.BackColor = vbGreen
Else
Me.Textbox1.BackColor = vbRed
End If
End Sub
View 5 Replies
ADVERTISEMENT
May 1, 2012
I ahve a user form that loads , I would like the textboxes to be red when blank and change white as they are populated.
View 2 Replies
View Related
Dec 20, 2012
I have the following code
Code:
Private Sub ComboBox1_Change()
TextBox1.Text = Range("P" & UserForm1.ComboBox1.ListIndex + 3).Value
TextBox2.Text = Range("N" & UserForm1.ComboBox1.ListIndex + 3).Value[code].....
In TextBox3, the user will input a percentage as a whole number, IE: 5 for 5%, but when the update is made, it is writing the "5" as 500% and is writing 50 as 5000%.
If there is already a percent in the cell it calls up IE: 50%, it shows up in TextBox3 as .5%
View 1 Replies
View Related
Apr 26, 2014
I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
View 2 Replies
View Related
Mar 29, 2007
Textbox background / text conditional colour change.
I have a textbox in an Excel form and wish the background and/or text font colour to be conditional i.e. if cell T45 > T41 then colour is yellow otherwise red.
View 9 Replies
View Related
Oct 6, 2009
I am building a conversion calculator on a userform. There is a textbox I've named "UserPctOff" where the user enters their value. I've got a label that I'm using to record the converted value. I keep getting Type 13 Mismatch error.
Here is my code.
Private Sub UserPctOff_AfterUpdate()
UserPctOff = Format(UserPctOff.Value / 100, " Percent")
LabelMDRate = UserPctOff.Value / (1 - UserPctOff.Value)
End Sub
View 4 Replies
View Related
Mar 24, 2014
I have a worksheey of data and i would like the tab to be a certain colour dependant on the the contents of a range of cells within that worksheet is that possible. i know i need to use VBA and it cna be done based ont he contents of one cell.
So for example i have a sheet of people i am awaiting payment from, based on the last column " bill paid" i want the tab to be Red if there are any blanks in this column/ range and go green when all the cells in the column/ range are filled with "y"
View 5 Replies
View Related
Jul 7, 2014
I have created a form and the form contains one textbox that will support only one character, I'd like that character to be Green in colour, after 2 minutes I'd like that character to turn amber and if another two minutes go by then turn red and remain as such until a new character is typed in and start all over again.
View 2 Replies
View Related
Jul 31, 2014
I have a userform that i have set the showmodal property to false.
This form has a list box that is populated with a huge list of items. I have a textbox in the userform that i use as a filter. so as the user types in something it filters the results in the listbox.
This was working fine but I added to the code to put a tooltip in when hovering over a item in the listbox. (using windows API to achieve).
The problem now is after i type one letter in the text box and it runs the change event it doesnt place the cursor at the end of the textbox anymore to continue typing.
I have tried setting focus to the textbox at the end of the event but nothing happens. I have searched all over the internet with no luck.
View 4 Replies
View Related
Apr 19, 2008
I want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
I tried the texbox & using the the controlsource from the properties window, this was only good for one result. for the next result the textbox won't change its value.
As i want this for display purpose only can i use the label for the above problem
View 9 Replies
View Related
Aug 10, 2009
I have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
View 2 Replies
View Related
Aug 17, 2013
I've prepared an excel file with a pivot table. Now I would like to change the Pivot "Report filter" by using combobox on userform.
Sample Data
ID
NAME, INIT
GENDER
DEPT
SALARY
DOH
LOCATION
RAISE
1
Smith, J.
F
Sales
$41,250.00
2/2/1982
Boston
$45,375.00
[Code] .....
VB:
Sub CreatePivot()
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("Employees Data").Select
Range("A1").Select
[Code] .....
Error:
Private Sub ComboBox1_Change()
ComboBox1.Value = objTable.PivotFields("DOH")
End Sub
View 1 Replies
View Related
Aug 16, 2013
I've prepared an excel file with a pivot table. Now I would like to change the Pivot "Report filter" by using Textbox on Userform. I've attached an excel file as an example.
View 2 Replies
View Related
Jan 14, 2012
Possible to set the BackColor of an ActiveX textbox to transparent? I have the BackStyle set to transparent, which is great since it will be transparent when not selected so you can see the color of the cell behind it, but once you select it to type in it, the BackColor overrides the cell behind it.
Right now, I have a sheet where the color of a cell changes to green if the textbox needs input from a user. If I have the BackColor set to white, the cell behind will change to green so the user knows they need to enter something in the textbox, but once they click the textbox, it goes white and may confuse them.
On the other hand, if I change the BackColor to green, it works great when the user clicks the correct textboxes, but if the user clicks the wrong textbox, it will 'incorrectly' turn green which may make the user believe they need to enter something in the textbox.
View 6 Replies
View Related
Oct 1, 2011
how to get out of a textbox and back into the worksheet cells without using your mouse?
View 7 Replies
View Related
Jun 17, 2008
I have a workbook called "Staff Planner". I need to check Columns C to I in Sheet "Plan" to firstly find text in a red font, and then copy this value to Sheet "Useage" in Column K. (So, search C1:I1, find red font, copy contents of cell, paste value to K1). I then need to repeat this with blue font/value to H1, green font/value to E1, and finally pink font/value to B1
View 9 Replies
View Related
Jul 3, 2014
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
View 3 Replies
View Related
Feb 2, 2010
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
View 11 Replies
View Related
Jul 25, 2014
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
View 1 Replies
View Related
Mar 8, 2014
distinguish text or value in a textbox with "%"? (e.g. input 7% or 0% is TRUE but input "" or 0 or 0.07 or or 7$ is FALSE)
View 4 Replies
View Related
Aug 26, 2007
I have various textboxes and they are entering values onto my sheet on my command.
If i say, enter 10 into a textbox, meaning 10%, on my spreadsheet it comes out as 1000% I thought about being clever and putting
range("a1") = textbox1.value / 100
but this brings up an error with the debugger!
View 6 Replies
View Related
Oct 12, 2011
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
View 1 Replies
View Related
Jul 27, 2014
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies
View Related
Nov 7, 2011
I have placed next and back buttons in the userform. I have a total of 8 pages.
The problem is that page 2 and 4 is not active. And I cannot see why. In the properties of the pages the data is exactly the same at all pages.
Are there errors in my code?
Code:
Private Sub cmdNext_Click()
MultiPage1.Value = MultiPage1.Value + 1
End Sub
Private Sub cmdBack_Click()
Dim intPage As Integer
intPage = MultiPage1.Value
Do
[Code] ..........
View 2 Replies
View Related
Nov 17, 2011
I have two pages in the userform. What I was trying to do is that certain textbox (txtDate) needs to be entered on the page1 before going to page2. The user can still select page2 however I want the vba to bring the page back to page1 if the data is missing.
Here is the code:
Private Sub MultiPage1_Change()
If MultiPage1.Value = 1 And txtDate = "" Then
MultiPage1.Value = 0
txtDate .BackColor = &H40C0
End If
It didn't work completely - the tab selection on top was on page1 however all the controls shown are still the controls under page2. I have to manulally click page1.
I also tried MultiPage1.Page(0).Enabled=True but it didn't work either.
View 3 Replies
View Related
Feb 21, 2013
We created a database for our employees who have security items and other things we need to keep track. We created a spreadsheet where data was entered on Sheet2 (Entry Form) and then by clicking various buttons would be thrown over to Sheet1 (MasterList) and put in alphabetical order. Then last week he said lets change it to a User form where i can put all the data, be able to tab through my text boxes and make the whole process of entering information faster and more efficient.. but now hes gone and I'm left with his macros and all this stuff i don't really understand! I have been doing pretty well on my own but im stuck "Search Employee" Here is what i have...
VB:
Private Sub SearchEmployeeButton_Click()
LastName.Value = Range("A500").Value
FirstName.Value = Range("B500").Value
[Code]....
use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.
View 2 Replies
View Related
Mar 31, 2014
Any formula to repopulate the data back to userform for editing. I need the data to populate when a record is selected from a combo box [named URN for unique reference number]
View 5 Replies
View Related
Jan 3, 2013
I have a "txtQuoteNo" box used in my userform "FrmQuotation", and this is recorded in column A of my Central Data spreadsheet (with a fair slug of other data from the userform).
I can currently recall the data into the userform from the spreadsheet using the QuoteNo, but when I need to resubmit it back to the spreadsheet, I can't see why the following code posts this new data onto a new line rather than the blank cells in the corresponding row of txtQuoteNo and column A (if you see what I mean...)
Set wb = Workbooks.Open("M:Central Taxi Data.xlsx")
With Sheets("Data").Range("A:A")
Set cell = .Find(myVal, LookIn:=xlValues)
rw = cell.Row
End With
RowCount = Worksheets("Data").Range("A" & rw).CurrentRegion.Rows.Count
[Code] .......
View 3 Replies
View Related
Aug 1, 2008
I call a userform (modeless), and then i'm trying to set the focus back on the range that was selected when i showed the userform. you would think i could just define the range and then use rnge.select like this....
set prevrnge = selection
UF.show (vbmodeless)
prevrnge.select
but it doesn't take the focus off the userform....
View 9 Replies
View Related
Sep 24, 2008
I have a textbox which displays a lot of text and I would like a VBA procedure which exports this text to a text file (.txt).
View 9 Replies
View Related
