I have a modal userform that I load to warn the user that the system is busy processing a scheduled job. The form is nothing more than a screen that comes up and says "One moment please..." with the form caption set to "Processing...". When I use the form in this way, if I don't use an application.wait command the form just shows the header without the text that it shows when I look at in the in the VBA IDE. (In other words it is just blank.)
I got a code that makes an animated userform popup (web browser in userform). that works smoothly. but, when I have that code before two more codes. The userform does show, but the animation does not. Until all the following two codes are finished running. The purpose was to have the animation running while the two codes are being processed.
Main Code: Code with 3 different codes.
Private Sub cmdAdd_Click() Dim iRow As Long If Sheets("LookupLists"). Range("N2").Value = "EXACT" Then Application. ScreenUpdating = False ' Loading user form popup Call ShowFrm Call CopyEmplInfo End If Call MergeCells End Sub
I have a userform that shows while a macro is running. The userform just informs the user that the macro is still in progress. However, I can get the userform to show and the macro to run, but the label on the userform won't appear. Here is the code I have:
Code: Private Sub Userform_Activate() Application.ScreenUpdating = False Sheets("Data").Select
I have some code to put a GIF animation into a web browser on a userform. This works fine - on its own. However, once the GIF has loaded I want to run a whole bunch of code in the background. If I run the code all at once, the userform appears but the picture doest show - but when I place a breakpoint between loading the userform and the main sub routine of my code - the GIF loads and the animation is shown all the time my code is running in the backgorund.
I have a userform that has a listbox that contains data in 7 columns. I also have a command button that when clicked allows the user to edit the data in whatever row of the list box is highlighted. This works fine.
I decided to have a double click in the listbox on a row do the same thing. So I simply picked the double click event and called the command button sub. When I try this, it runs the command button sub, but then it runs the userform Activate sub. This is a problem as it does things that I do not want to occur again.
I then decided to put the command buttom code in a separate sub and then call that sub on the double click -- same result.
Then I just put the exact code that I have in the command button into the double click event -- still does it.
Anyone know why this happens, I see no reason for it. It works great in the command button, but with double-click it run the userform Activate sub when it is done.
Here is the code that runs (if called by a command button it works fine, if called by a double_click in the listbox, it runs the userform_activate sub):
I have a userform with 16 Textboxes Named "Text1" through "Text16". What I am trying to do is apply code that if there is content in the textbox it generates a new row after row15 and inputs the text in cellA of that row. Ex. "Text1" = JOE "Text2" = TONY......Hit Commandbutton1 on userform. It inserts Row16 puts "JOE" in A16.....then sequentially it inserts Row17 puts "TONY" in A17.
I have a long complicated macro that processes a ton of data and gives the output in a new sheet. I then want to create new buttons (or some sort of user clickable triggers) on this new sheet that runs another macro.
I have got the actual adding of buttons in the sheet working, but I can't find a way to automatically assign macros to newly generated buttons during runtime. Is this even possible (or are there any clever tricks I could use to get around this?)
Essentially, I am working with a database for a school and up until this point, each row matches up to a student with a bunch of information on them. One of these pieces of info is their parent's names. This is a much simplified look at things, but the screenshot below is a basic version of what everything looks like:
Now, the school wants me to split up the parents names from the student's and place them in their own row. I have recorded a macro to do this where you make the active cell the "full name" column for the row you want to expand, and then run the macro. Afterwards, up to two more rows are added, with the parent's names and some data copied. Below is a screenshot of what that looks like: (yellow is the new data generated, and blue is the active cell I marked to run the macro properly)
The issue is that there are thousands of these that need to be done, and I figured there is a way to do this with a macro. The issue is that not every row has parents names to expand out.
In layman's terms, I need a macro that will look at the two columns titled "Father's Name" and "Mother's Name" on each row of the spreadsheet and then, if there is any data in both or either of them, it should set the active cell to the "Full Name" column for that row then run the macro accordingly. After that it should repeat this all the way down, skipping any where neither of the columns have text in them
In the actual spreadsheet, the columns that need to be checked are AW and AX, and the column that needs to be set to the active cell before running the macro is B.
i need to make a macro that takes workbooks or files and runs them through another macro. i already have the 2nd macro done and it is working perfectly i just need to know how to make the one that finds the other files and runs them all through the macro i already made. My boss said that he will have about 150-200 files to run through this macro.
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer) If CloseMode = vbFormControlMenu Then Application.ScreenUpdating = True Unload Me RestrictedOptions.Show Else Cancel = True End If End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
It copies certain sheets out of a workbook (for a new workbook) Unprotect the sheets in the new workbook Deletes a particular cell on each sheet Unhides a sheet Sets all of the new worksheets to normal view Protects the new sheets Lets the user save and name the new workbook.
All is working fine Except it will not change the new workbook from Page Break View to Normal view.
The code I'm using = Sheets("name").Activate Activewindow.View=xlNormal
Here's the strangest part. When I run the macro from a command button, the newly created workbook retains the page break view (as is in the original).
When I run the macro line by line via F8, IT WORKS JUST FINE
I have created a macro in xl2000 which was working fine - although through corporate upgrades my machine has now been upgraded with xl2003 and the macro runs for a bit and then crashes on the code below, although it only highlights teh 'rnum'
rnum = ActiveCell.Row Is there a difference between xl2000 & xl2003?
I have a macro which reads data from a large number (up to 500) of books in a folder. This extracted information is subject to some fairly heavy analysis which means that the macro runs very slowly as the sheet is constantly calculating.
I would like to add some code - maybe after 'screen updating = false' - that would turn off auto calculation while the macro runs and then restore it once the macro is finished.
i have a button on my workbook1 that opens another workbook (lets call it workbook2) and automatically runs a macro on opening it. Once opened i have a button on workbook2 to close itself. I then go back to see workbook1. This all works but then when i click on the button to open the workbook2 again it opens but the macro does not run.
I searched for this and found a few examples on splash screens, but if someone could help I would appreciate it.
Basically I have this massive macro that runs, I recorded some of it, and VBA the rest. It does a bunch of things like bringing in different spreadsheets, formatting vlookups blah blah blah... Anyway for a nice touch I was hoping that I could get a splash screen or something that will run while this macro is running in the background. How hard would this be? The macro is button driven...
I have a macro in my worksheet that runs as a change event on certain comment cells. This macro unprotects the worksheet, expands the merged comment cell that just change, and re-protects the worksheet. The cell expansion works great. When I re-protect the worksheet all of the cells work correctly, except the cell that was just changed. Any other "unlocked" cell in the document stays unlocked after the protection is applied, but the cell that just changed becomes locked. I need this cell to remain unlocked to allow the user to update the comments. Here is my full
I have a spreadsheet that is made up of single line items with sub-totals at various points going down the sheet (ie the spreadsheet is split into sections)
Each section is about 100 rows long and 40 columns wide, 10 of which are sub-totals, all using the same formula from that i enter in column A.
As i add new sections i have recorded a simple macro that copies the active cell (ie A15 for example). It then pastes into D15, F15, H15, N15, X15 and then returns to A15. I have linked this up to ctrl X for ease of running.
I have around 500 section totals to "ctrl X", per spreadsheet and 10 spreadsheets to do in total. I have firstly filtered all the line items (rows) out to leave me just the sub-totals to [ctrl x] [arrow down] [ctrl x] [arrow down] [ctrl x] etc etc etc.... Is there anyway to automate this process, i have tried recording another macro of me [ctrl x] [arrow down] about 30 times, but when i run it, it pastes on the hidden rows, not just on what you see on the screen. Is there a bit of code i can enter so it only sees what is visible.??
I have a peice of code which opens up a number of Workbooks (200+) and updates a series of control tables in each. Given our security etc environment, links and external references etc are not possible. The target files must all be standalone and self-sufficient.
The problem I have is that when I run the procedure in question in the usual way, the procedure simply terminates after the first file is opened. No error messages, no distress - it just stops. I have put debugging calls all around the "Workbook.Open" call, and it simply doesn't make it out of the call. There is no Auto_Open code in the workbooks being opened and (as I indicated above) no external links, references or function calls.
What's weird is that if I step through the procedure in the Command Debugger, everything works fine. Even weider, if I complete step-by-step processing on the first target file then I can press "Play" and the code will complete execution and process all the remaining files without error.
I have rebuilt/recreated/re-ordered the target files and even moved them to a different volume.
If anyone has seen this before, or has any idea what the cause may be, or even just a wild idea, I'd love to hear it.
Code segment attached.
* '*** Process each file in the list provided '* For intCounter = 1 To intWBS_Files
I have a button. When pressed, it runs a macro. Instead, after pressing the button, I would like the user to confirm to run the macro and display some info about it. This is to make sure the user does not accidentally run the wrong macro (button). I just need a prompt box, with a line info, and the two choices YES and NO. If NO is selected, nothing happens. If YES is selected, macro continues.
This macro ran fine until I started using Offset on ranges to have them extend. The macro replaces "L" with blanks but does not go on to delete the rows. The name "Type" refers to =Offset(Mem05!$A$2,0,0, CountA(Mem05!$A$2:$A$270),10)
Relevant part of Macro wb06.Activate Application.Goto Reference:="Type" Selection.Replace What:="L", Replacement:="", LookAt:=xlWhole, _ SearchOrder:=xlByRows, MatchCase:=True, SearchFormat:=False, _ ReplaceFormat:=False On Error Resume Next
I have a spreadsheet with sales figures for a company over a few months. I want to create a macro that will insert a new month after the last month. I have got it to work for the first month but after that it will just insert 2 black cells after.
i have a named cell called Average_slales_per_month that is next to the last month all the time.
I have a workbook that contains 9 worksheets. Four of the worksheets have the same row lables in column B and must always be the same. Three of the worksheets are fed from the 4th sheet so that the integrity of the lables is maintained.
The user can change the lable value to meet their needs and they can insert or delete rows (within limits) as they see fit.
The attached macro "Sub Delete_Row_All_Sheets()" works fine when I run it from Debug (F8).
However, when I run it from Forms.ComboBox the macro returns to the "y = Application.InputBox("Enter The Row Number You Wish To Delete", _" screen. If I select cancel, the results I anticipated occur but I don't want the user to have to assume this will happen.
Why does the macro return to this screen when executed from the ComboBox but not when executed from Debug?
I have a macro on a particular workbook that runs when the workbook closes.
This runs fine when I close the workbook itself. If I happen to have other workbooks open and then I close EXCEL rather than an individual workbook, my macro that runs on close always runs when it is not the active workbook.
To put it another way, say that my 'run on close' macro is workbook 1. I also have workbooks 2 and 3 open as well. If workbook 3 is the active workbook and I choose to close Excel (and thus close all three workbooks), my 'run on close' macro runs straight away and, worse still, will run it on workbook 3 (my active workbook).
How can I stop the macro running until it is the active workbook in the closing chain, so that it only runs on the correct workbook? (workbook 1 in my example)