Fill UserForm ListBox & Show Userform
Nov 11, 2006
having trouble with the details of actually making these features work for me. I figured out how to create a UserForm with a ListBox and 2 buttons, but I don't know how to proceed from here.
1. Populate the ListBox in the UserForm with a list of names from the sheet "Totals_Dropdowns", cells K2:K11
2. Make the UserForm pop up and enter the user's selection into cell C40 of the "Regenerate Request"
I know these are very basic operations, and I'm pretty sure I can figure out the rest of my problems once I can get past the above.
View 7 Replies
ADVERTISEMENT
Mar 2, 2008
i want to use a listbox or combobox on a userform with the values coming from column A in the MAIN sheet. what i need is if the colour i want is not there i type the new colour in it then adds the value to the end of values in coloumn A and too the list for the next time i use the userform. is it possible to do this and how?
View 3 Replies
View Related
Jan 30, 2014
I have a UserForm with two ComboBox's (name ComboBox1 and ComboBox2) and a ListBox (name ListBox1).
In UserFrom "ComboBox1" shows two options of months "January" and "February".
And ComboBox2 shows options "Advertising", "Bills", "Daily Expenses"
I have some Data on my Excel Sheet. I want to pull that Data and show it in UserForm according to their Month in which they are incurred. For Example If from Userform "January" month is selected and "Advertising" is selected then it should show data in the ListBox1 as follow.
1-Jan-14JanuaryAdvertising TV 100
5-Jan-14JanuaryAdvertising Newspaper 30
5-Feb-14JanuaryAdvertising Internet 30
I have attached UserForm and Excel Sheet.
View 8 Replies
View Related
Jun 8, 2009
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
If CloseMode = vbFormControlMenu Then
Application.ScreenUpdating = True
Unload Me
RestrictedOptions.Show
Else
Cancel = True
End If
End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
View 9 Replies
View Related
Jul 25, 2006
how do i show a userform in Excel in the spreadsheet environment? I used to "run macro" but unable to run userform code "private sub".
View 2 Replies
View Related
Jun 3, 2009
I have a userform button that when clicked loads another userform.
I am getting a Runtime Error 13: Type mismatch on the line in bold in the code below
Private Sub cmdAdd_Click()
Me.txtAdd.Value = Me.VarNo.Value
VariationsForm.Show
Unload Me
End Sub
I do not get an error on the "Edit" button code which is similar so why is the above not working.
Private Sub CmdEdit_Click()
Me.txtEdit.Value = Me.VarNo.Value
VariationsForm.Show
Unload Me
End Sub
View 9 Replies
View Related
Apr 19, 2006
I want to use the following to launch a userform I created.
Sub showuserform()
Dim ans As Boolean
ans = msgbox("do you want to show the userform?", vbYesno)
If ans = vbYes Then
userform.show
End If
End Sub
The trouble is that if I click yes, nothing happens.
View 4 Replies
View Related
Mar 17, 2009
i have a ListBox in my userform i want to enter n items in the listbox at runtime
i also want to have a delete button,so that if i think i dont want that particular item in my listbox,by selecting that item from that listbox and clicking delete,should remove/delete that item from the listbox.
View 13 Replies
View Related
Dec 29, 2009
I have a listbox that is populated based on a named range from another workbook. Below is the code that populates it:
Private Sub UserForm_Initialize()
Dim InvDB As Workbook
Set InvDB = Workbooks.Open("C:Documents and SettingsPATSYSDesktopInvoiceDB.xls")
With InvDB
ListBox1.RowSource = .Name & "!rng"
.Close
End With
End Sub
My problem.
When I scrollbar down, no data appears.
This leads me to think that I need some kind of userform event to keep populating the listbox (similar to my code above) as I scroll up or down.
My questions:
1. Is it possible to specificy a rowsource in the properties window for the listbox that is pointing to an external workbook? If so, how do I write the rowsource?
I know that if the source workbook is open, I can use the rowsource:
InvoiceDB.xls!rng
But if source workbook is close, the below does not work:
C:Documents and SettingsPATSYSDesktopInvoiceDB.xls!rng
2. What is the userform event when you click the listbox scrollbar up or down?
View 9 Replies
View Related
Mar 24, 2008
I have a button that is "Add" in the userform. I would want to Combine different combinations of items together (Listbox1 and fschool) and list them out in a worksheet. However, in the current setting below, whenever i click add again, it replaces the previous one. How do i modify the code such that whenever i click the button, it puts the information in the next row of the worksheet? I tried using K+1 as a new row but it doesn't give any result
Private Sub Add_Click()
Dim NewRow As Integer
Dim K As Integer
NewRow = K + 1
Worksheets("Results"). cells(NewRow, 2).Value = UserForm1.ListBox1.Value
Worksheets("Results").cells(NewRow, 3).Value = UserForm1.fschool.Value
End Sub
View 5 Replies
View Related
May 22, 2008
I have listbox on a userform with number and the way it should work is that when I click on a number in listbox the data correspond to this number should be copied from one sheet to another sheet and gets plotted on graph. The problem is when I click on a number in the list box the data moves from one sheet to another and get plotted but only after I exit the userform sheet.
View 14 Replies
View Related
Jul 17, 2009
On my userform, the user can decide to take a number of actions, each with its' own listbox. The user doesn't have to select from each. If the user inadvertently goes into a listBox, then there will be a record selected, most certainly erroreously. Is there a way to "remove focus" from the incorrect listBox and remove the selection? Maybe some way to signal that the rowSource should be reloaded?
View 2 Replies
View Related
Oct 20, 2009
I have a userform with frame and a listbox in a frame. Listbox is higher than a frame so a frame has a scroll bar.
How can I print the whole listbox with all items?
The code UserForm.PrintForm will print just the 'visible' part of listbox, but not the rest of it which is hidden in the frame
View 11 Replies
View Related
May 6, 2007
I have this part of code that populates my ListBox
With UserForm1.ListBox2
.AddItem ActiveCell.Offset(0, 7).Value
.AddItem ActiveCell.Offset(1, 7).Value
.AddItem ActiveCell.Offset(2, 7).Value
.AddItem ActiveCell.Offset(3, 7).Value
.AddItem ActiveCell.Offset(4, 7).Value
.AddItem ActiveCell.Offset(5, 7).Value
.AddItem ActiveCell.Offset(6, 7).Value
.AddItem ActiveCell.Offset(7, 7).Value
.AddItem ActiveCell.Offset(8, 7).Value
.AddItem ActiveCell.Offset(9, 7).Value
.AddItem ActiveCell.Offset(10, 7).Value
End With
It draws the Values (names) off of Sheet1 and ActiveCell is B26
Question one: Is there a better way of writing this and for it to stop adding to the ListBox once there is no Value in the Offset cell....
View 9 Replies
View Related
Aug 31, 2007
I have been searching the internet and this sight and have found many variations, but I cannot seem to get my listbox on a Userform to populate.
The array is 10 columns by 5 rows. I can get it to add one long column of data, but this is obviously now what I want.
View 9 Replies
View Related
Jul 24, 2008
I have one List box that is populated by a hard coded array, the userform is generated from a command button :
Private Sub CommandButton1_Click()
UserForm2.Show
End Sub
Im then using this code to set up my array:
View 9 Replies
View Related
Apr 30, 2009
The compile errors were happening in the For i statement, interesting enough the compile error went away after I closed the demo/example worksheet that had it in there too...? Not sure if that was the exact fix/trick. Now comes the next error: Run-time error '13': Type mismatch on the line highlighted below.
What else can cause this Run-Time error?? or is there another way to carry the listbox result into that second column. I am starting to think that the Run-Time is because the value selected was not found in that second column, or I am looking in the wrg column.....
Private Sub CommandButton1_Click()
Dim lbVal As Long
If ListBox1.ListIndex = -1 Then Exit Sub
'Not sure that I need the next line. Listbox is a SingleSelect.
For i = ListBox1.ListCount - 1 To 0 Step -1
If ListBox1.Selected(i) = True Then
lbVal = ListBox1.Value
View 4 Replies
View Related
Jul 23, 2013
I'm attempting to add the values for a combobox and (2) text boxes to a list box on a form. The list has 3 columns. When I run code to add to the list box the values are added on separate rows instead of the same row. See code below and attached screen shot.
VB:
Private Sub cmdAddToList_Click()
Dim i As Integer
Dim iRow As Integer
If Me.cboParts.ListIndex = -1 Then Exit Sub
For i = 0 To Me.lstParts.ListCount - 1
[Code] ....
UserForm3.jpg
View 2 Replies
View Related
Jan 7, 2009
I am trying to loop through a listbox with the code below.
what is happening is; if there are 6 items, the msgbox will show 6 times, but always with the last item in the list. I have tried different modifications but can't get it. There are no headers in my listbox.
View 2 Replies
View Related
Feb 27, 2014
I have a (MultiSelect) ListBox1 that is populated with Customer Names for the user to select from. I want the user to be able to hit the CommandButton1 adjacent to the ListBox1, and the selected Customers copy into/get added to the ListBox2.
I have the following code, adapted from other code, but it is not working:
[Code] ........
View 2 Replies
View Related
Apr 24, 2009
I've attached a picture of how my userform is set up - all of the code is working fine and does very dandy, even if I do say so myself, but as you can see when I load data into the listbox, the date on the left hand side becomes M/DD/YYYY whereas I want it as DD/MM/YYYY.
All of the columns except Due Dateconsist of text/numbers and these load fine however even if I change the format of the Due Date data within the worksheet before loading it in it still loads incorrectly. Is there any way to format the date to how I want it within the ListBox?
View 2 Replies
View Related
Jul 16, 2009
I'm having problems loading data into a listbox. When the form first opens, it loads the data twice. I can then kill the form and restart it and the data is in there three times. I can't see any loading problems with the userForm_initialize routine. How can I ensure that the listBox is empty before I start adding data? This would also seem to be necessary prior to loading a different set of data into the form - correct?
View 7 Replies
View Related
Jul 29, 2009
I have created an userform listbox in workbook A and RowSource points to a specific range of values in a particular sheet in workbook A. The macro is activated by CTL(z). This part works fine as long as the active workbook is A. I want to activate the listbox from a different active workbook say B. The List box appears but no data because the rowsource points to a range in workbook A. I have tried to put Workbooks("workbook A") in rowsource but still no success.
View 2 Replies
View Related
Feb 4, 2010
I spent so long time to fix this problem, but it seems that I can't go on. I have a simple question. How can I get the data from the UserForm and use it in the worksheet? Everything works fine, only the UserForm makes problems. Here is the
View 4 Replies
View Related
Feb 12, 2010
I have created a userform on the "Database" sheet that has a listbox at the bottom that populates with records when I search for someone using the 'Name' box.
The problem that I am having is that when I enter "Person" and get the 30-odd records appear in the listbox, I click on say Person 5 BUT the userform fields do not update themselves fully with the correct information.
I found the following thread ....
View 10 Replies
View Related
Oct 25, 2011
I want to create a listbox on a userform with 3 columns. The source data comes from the sheet "Data". After selecting a value from a combobox (which can also be found in the "Data" sheet), I want the first coloumn to display the matching LJHs, sorted ascending. Second column the matching date and the 3rd column to be the total quantity (maybe with SUMIFS).I dont know if you can refer to a listbox element for the worksheetfunction SUMIFS.
This is what the Listbox is supposed to look like and some sample data.
View 1 Replies
View Related
Mar 20, 2013
I made an excel MAcro Sheet as I am not good in macros. How to make a columns in list box via text boxes in userforms.
View 2 Replies
View Related
Jan 22, 2014
I have a UserForm with Combo Boxes, List Boxes, Text Boxes etc. When the OK button is clicked I want it to ensure certain fields are not left blank and notify the user (see code below). This works great for the combo boxes but not for list boxes. It seems to skip over that code. In other words, in the code below, if a manager is not selected, it doesn't notify the user.
Private Sub OkButton_Click()
'Verify fields are not left blank
If cboAgent.Value = "" Then
[Code]....
View 2 Replies
View Related
Apr 28, 2014
I'm trying to return the selected items from a listbox to a range within a Worksheet when the user press the >> button as shown below. The point is i can't return ALL the selected items but only the first picked by the user.
Here is the code i'm using when button >> is pressed:
Code:
Private Sub Inserir_Atributos_na_Analise_Click()
Dim i As Long
Set ws1 = Worksheets("ListBox")
[Code].....
View 7 Replies
View Related
Jan 31, 2010
I am trying to create a userform that is reusable by turning on and off diff objects, and reusing objects. I am running into a little difficulty of resizing the list box for various lengths if items Example would be if I have a list of items and the longest one is 93 chars long, I need a width of 672 When I have a list that the items are each 5 chars long, I need a listbox width of 92
For simplicity's sake, I am using Courier (supposed to be a monospaced font) pitch is 10. I would have figured that my width would be simply a matter of finding the longest length in the list and then multiply that times some magical number that represents the width of the letter (since monospaced, each letter should be the same).
But, with the 93 char long string, the "average length" of each letter seems to be 7.2 (672/93 = ~7.2) but for the shorter words, it seems to be wider at 18 (92/5 = ~18)
Is there a way to have the listbox size itself to the width of the strings?
View 9 Replies
View Related
