Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
If CloseMode = vbFormControlMenu Then
Application.ScreenUpdating = True
Unload Me
RestrictedOptions.Show
Else
Cancel = True
End If
End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
Using VBA I have used "LoadPicture" to load a picture to a picture frame on my userform. The actual file name is driven from a label. I now want to unload it so the value is None.
I have a userform that after some operations won't unload. It executes subs from other buttons on it but it won't unload. I use ScreenUpdating but I always set it to true.
having trouble with the details of actually making these features work for me. I figured out how to create a UserForm with a ListBox and 2 buttons, but I don't know how to proceed from here.
1. Populate the ListBox in the UserForm with a list of names from the sheet "Totals_Dropdowns", cells K2:K11
2. Make the UserForm pop up and enter the user's selection into cell C40 of the "Regenerate Request"
I know these are very basic operations, and I'm pretty sure I can figure out the rest of my problems once I can get past the above.
I have a userform button that when clicked loads another userform. I am getting a Runtime Error 13: Type mismatch on the line in bold in the code below
Private Sub cmdAdd_Click() Me.txtAdd.Value = Me.VarNo.Value VariationsForm.Show Unload Me End Sub
I do not get an error on the "Edit" button code which is similar so why is the above not working.
Private Sub CmdEdit_Click() Me.txtEdit.Value = Me.VarNo.Value VariationsForm.Show Unload Me End Sub
I have a userform with a dropdown box, a refedit and an accept button.
The user selects an item from the drop down box and then selects where on the sheet they want to place the item. I am wondering how to move the selected box in my Userform once the user has selected an entry from the drop down list. This is so that they dont actually have to click in the refedit box after selecting from the drop down box.
I have a user form in which i want an active cell value when it is initialized, its a text box which should not be editable but should able to copy when its shown.
I have created a user form that has 6 input boxs and at the bottom of the userform has a seventh box that has a running total. I have two buttons one to "accept" and one to "cancel". My prloblem is creating the code to make it work correctly.
1) if a cell in B5:B20 become the active cell than the userform is to open up. 2) once the useform is open the user can input up to six different numbers into the input box's which will show the runinng total in the seventh box. 3) Once all numbers are inputed into the input box's the user can hit "accept" to post the total into the active cell or hit "cancel" and nothing have nothing happen.
I am working on a addin UserForm to quickly format cell text, especially only select characters in a cell. I have this functional in a modal setting working with the active cell when I activate the UserForm. What I would like to be able to do is to work in excel without having to close the Userform and have the textbox update with each new cell. I have changed the UserForm properties to ShowModal = false which gets the first half. However the textbox will only show the cell value I started with.
VB: Private Sub UserForm_Activate() TextBox1.Text = ActiveCell End Sub
I have created a user form and I am trying to get the active control colored. I am using the code from Mr Excel's VBA book - starts on page 454, and I have entered all the code, but now when I activate the user form I get an error ....."Compile Error. Invalid attribute in Sub or Function." and when I click OK, it takes me to this line of code.....
Private WithEvents objForm As clsCtlColor
In the book, this is where I am supposed to start entering the code "behind the userform" rather than in the class module. So, I assume this means that this code goes with all the other code for the user form (in VBA project click on form, then view code). Am I wrong? Should I be adding a module? Not sure what I am doing wrong.
Here is the code I have in the class module....
Public Event GetFocus() Public Event LostFocus(ByVal strCtrl As String) Private strPreCtr As String
Public Sub CheckActiveCtrl(objForm As MSForms.UserForm).......
A custom UserForm pops up when a cell is double-clicked. The form contains a ListBox that presents the user with a list of values to select. When the UserForm first pops up I want the item that matches the value of the activecell to be highlighted/selected.
I'm trying to show a form from inside another form. Example: form1 has a command button and when clicked, I want it to show form2. But I always get a run-time error '32': type mismatch.
I have worksheet with cell A1 always change simultaneously (input from other source), in cell A2 I put formula, so value in A2 always change depending value in cell A1. The problem is I want to show that value A2 in userform VBA. I tray using textbox (in property textbox control source I set to A2) but not working because Cell A2 change from formula to static value.
I have a userform that is working perfectly, but when I try to make it an add-in I can't even get it to load. When loading the userform as an add-in I get the error "Run error nr. '9'.: The Index is out of the interval" (freely translated from Swedish to English). The code I'm using to load the userform is
I have a userform with multiple tabs. I have buttons on the excel sheet that correspond with the tabs. How do I get the buttons to open up their respective tabs in the userform?
For example: Button 1 opens Userform-Tab1; Button 2 opens Userform-Tab2; Button 3 opens Userform-Tab3; etc.
Right now they all open the userform, but open the first tab.
I have created a user form where I have two Dates fields. Date Leave (three comboxes, CmbDay, CmbMonth and CmbYear) and then I have written the following code
Private Sub Label4_Click() If CmbDay.ListIndex -1 And CmbMonth.ListIndex -1 And CmbYear.ListIndex -1 Then If IsDate(CmbDay & " " & CmbMonth & " " & CmbYear) Then MsgBox "You selected " & Format(CmbDay & " " & CmbMonth & " " & CmbYear, "dd/mm/yyyy"), , "Date selected"
[Code]....
I have got the code from there.
But I want the show the same date field in another field as Date Join. I have changed the names of Combo Boxes but it is not working.
I want to show the same combo boxes in another field. How do I do that?
I want to temporarily display a userform (maybe for 4seconds) when my spreadsheet loads.
I cannot grasp the ontime function, and from what I can tell most messages posted on here relate to using it for intervals, or to be used at a set time in the day. (I have looked at the Helpsheet for the Ontime function, but struggle to apply what is being said to my situation)
I bet you're getting sick of the "X" questions, and I have done an exhaustive search but the search filter kills searching for (X) or 'X' or "X" .. but nothing I did find is what I am looking to do. I have any # of userforms that when you click the "X" in the top right side, it will hide the userform... once.. Is there a fix to the code below to make it do it every time its clicked?
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer) If CloseMode <> 1 Then Cancel = 1 UserForm15.Hide UserForm11.Show If CloseMode = 1 Then Cancel = 1 UserForm15.Hide UserForm11.Show End Sub
Like I said, I don't want to disable it, I tried that off of one of the posts I found and thats just plain annoying, I just want it to hide the one userform and show the other. This will do it once and then you can click it all you want and it wont do anything.. see the annoying trait above.. this lasts until you exit the program.. so the X button can be hit repeatedly though out the day. The userform 15 is visible, userform 11 isn't shown, IE not behind userform 15.
Can the userform be coded so that it loads somewhere other than where it appears. I know that the user can move it after it loads but it would look better moved on its own prior to it being used. I have coded ThisWorkbook which loads on a double click:
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean) UserForm1.Show End Sub
I need the userform to display over to the right and up a bit
I've got a sheet with 5 UserForms (1..5). Whenever I hide one with a command button there is always a piece of code securing that the basic UserForm1 will be shown in the end. But this is only so when the UserForms get hidden with the use of the command buttons. When the user simply closes the UserForms by usign the x sign he ends up with the active sheet and no UserForms present. How can I secure that closing the last active UserForm with the x sign will cause the basic UserForm1 to show up.
