UserForm_Initialize Code To Test Certain Cells

May 9, 2007

The below code tests a particular cell before displaying the userform. If Range ("Bal_BF") contains an error (such as "#N/a"), a message box is displayed and the form should NOT display.

However, the code is still trying to display the userform, and gives me a error message "Object variable or With Block variable not set".

When Bal_BF contains a value, the form displays correctly.


Private Sub UserForm_Initialize()

If Employee = "" Then Call Retrieve

If IsError(Range("Bal_BF")) Then
Call MsgBox("Your name doesn't appear in the Holiday & Absence file." & vbCr & vbCr & _
"Please see Leila Fretton or Neil Jimack about this.",.........

View 9 Replies


ADVERTISEMENT

Test Two Cells And Set A Third Cell With Different Values Depending On Test Results

Aug 21, 2013

I am trying to determine Long Term Gain (LTG,) Long Term Loss (LTL,) Short Term Gain (STG,) Short term Loss (STL,) or No Loss nor Gain (NGL)testing two cells (A1 and B1)and setting a third cell (C1) to the text LTG, LTL, STG, STL, or NGL depending on the results of testing cells A1 and B1.

A1 represent a number of years and B1 represent gains or losses (negative)in dolars.

The way I see the logic is as follows:

If cell A1 or cell B1 are either one of them equal to 0, then it is neither a Gain nor a Loss (NGL.)

If cell A1 is greater than or equal to 1, then it is Long Term; else, if A1 is greater than 0 and less than 1, then it is Short Term.

On the other hand, if cell B1 is greater than 0, then it is a Gain; if B1 is less than 0 (a negative number,) then, it is a Loss.

I need to find (if it is posible in Excel) one formula to test the two cells for posible outcomes:

If A1 = 0 then C1 = NGL
If B1 = 0 then C1 = NGL
If A1 >= 1 and B1 > 0 the C1 = LTG.
If A1 >= 1 and B1 < 0 the C1 = LTL.
If A1 < 1 and B1 > 0 then C1 = STG
If A1 < 1 and B1 < 0 then C1 = STL

View 3 Replies View Related

Test Whether Code Has Executed

Mar 22, 2008

I have some code which formats a worksheet based on user selections in a form. The code works, except when the user has made the same selections in two multi-select list boxes. I need to find a way to determine whether the code has already formatted the worksheet.

To me, it seems that there might be two ways to do this, 1) have a test on the original block of code that checks whether this portion of the code has already executed for this variable or 2) check the worksheet for the string (the code formats the same string each time but adds the variable for the current iteration of the loop only if Year1 = True.) The problem is that I only want to format the column if it hasn't already been formatted for that selection.

If CostShare = True Then
For Each ctrl In UserForm2.Controls
If TypeName(ctrl) = " ComboBox" And ctrl.Visible = True Then
If ctrl.Value = "Cost-Share" Then
t = ctrl.Tag
For Each ctrl2 In UserForm2.Controls
If TypeName(ctrl2) = "ListBox" Then
If ctrl2.Tag = t Then
With ctrl2
For ii = 0 To .ListCount - 1...............................

View 2 Replies View Related

UserForm_Initialize

Apr 1, 2008

It is not Initializing.

Sub test()

UserForm1.Show

End Sub

Private Sub UserForm1_Initialize()

UserForm1.TextBox1.Value = 8

End Sub

View 9 Replies View Related

Test VBA Code Starting At Specific Line

Sep 4, 2010

Let's say I have a long macro and I want to test some code a ways down in the macro, but I don't want to have to run through all the code to get there, because I already have my Excel spreadsheet set up at the point I need to check and I just want to start checking the code a ways into the procedure.

Short of commenting out all the code above where I want to start, is there another easier way to do this?

View 8 Replies View Related

What Is Difference Between Userform_activate And Userform_Initialize

Dec 11, 2008

I need to understand the difference between userform_activate and userform_Initialize.

When do I use one or the other or both.

View 3 Replies View Related

Userform_initialize - Reset A Form

Feb 5, 2007

I have created a form containing a list box. This list box contains values (Items) that correspond to a particular product (i.e. each time I view a new product, I need to see a new list of items in the list box). I have used Userform_initialize to set the Items (see below). The values are themselves drawn from a spreadsheet. I have only pasted the piece of code in question - I have a lot more code prior to that in order to define the variable "varcount".

Userform_initialize
Dim w As Workbook
Dim varLine As Integer
Dim varcount As Integer
Dim vItem As String
Set w = ThisWorkbook
For counter = 1 To varcount
Selection. Offset(0, 0).Select
vItem = Selection.Value
frmCheckTwinSku.lbTwinSku.AddItem (vItem)
Selection.Offset(0, 1).Select
Next counter.........................

View 3 Replies View Related

Test/Compare Pivot Table Fields Macro Code

Apr 24, 2008

I wrote a macro for a pivot table.

Range("A1").Select
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:= _
"Export!R1C1:R3000C53").CreatePivotTable TableDestination:="", TableName:= _
"PivotTable4", DefaultVersion:=xlPivotTableVersion10
ActiveSheet.PivotTableWizard TableDestination:=ActiveSheet.Cells(3, 1)
ActiveSheet.Cells(3, 1).Select
ActiveSheet.PivotTables("PivotTable4").AddDataField ActiveSheet.PivotTables( _
"PivotTable4").PivotFields("Reference"), "Count of Reference", xlCount
With ActiveSheet.PivotTables("PivotTable4").PivotFields("ACN received date")
.Orientation = xlRowField
.Position = 1
End With

What i want to know is if there is a code line to test if "Non Processed" value exists in column "Status" and then hide the value.

Now, if the macro does not find one value just gives me error.

View 7 Replies View Related

Test 2 Cells Before Using SUM

Nov 28, 2007

I am using the formula below to return a blank cell if either logical test returns true but apparently the OR operator returns a #VALUE error when applied to a non numeric value in a cell - in this case cell E40. =IF(OR(E40="N",P40=""),"", SUM(P40,S40,V40,Y40,AB40,AE4))+F40. My goal is to return a blank cell if E40 contains the letter N or P40 is blank, otherwise perform SUM(P40,S40,V40,Y40,AB40,AE4))+F40.

View 4 Replies View Related

Copy Test From Cells Into Row

Jul 9, 2014

I am trying to find a script where I can see information more clearly. I am trying to copy certain cells and have them into a single row. For example, everytime the word USER comes up, I want that in a single row and all the information that comes after it and below to be in the same row. So I would want all this information in a single row. And it would start a new row when the word USER comes up. I will attach an excel table for an example. Working progess.xlsm

1READY
LU*
USER=irrcertaNAME=CERTAUTHAnchorOWNER=irrcertaCREATED=01.097
DEFAULT-GROUP=PASSDATE=00.000PASS-INTERVAL=N/APHRASEDATE=N/A
ATTRIBUTES=REVOKED
REVOKEDATE=NONERESUMEDATE=NONE
LAST-ACCESS=UNKNOWN
CLASSAUTHORIZATIONS=NONE
NO-INSTALLATION-DATA

[Code]...

View 1 Replies View Related

Perform Conditional Test Based On Sum Row Of Cells Using VBA?

Feb 6, 2014

In the past I have used VBA script to change column with size based on cell values as per follows:

[Code]....

Now I wish to change row size in a similar fashion only the criteria will be a maths function rather than a string in a single cell. The maths function will simply be a sum of cells in a row. I will need to test whether or not the row ads up to a number greater than zero.

To illustrate what I am trying to achieve I have (poorly) written out a rough attempt at the code below:

[Code] ....

I am unsure how the syntax works for this, I considered defining the range as a string first so I could test the value of a single variable (by defined name) rather than directly referencing the row of cells in the formula. As this code needs to be repeated many time for many rows the simplest solution would be b.

View 7 Replies View Related

If Not Equal To: Test If The Value Of Cells AZ2:AZ2000 Are MB50017

Jun 17, 2009

Collumn AZ 2:2000 should always have a value of MB5017 in the first 6 positions on the left, with an additional four digits following. I need to test if the value of cells AZ2:AZ2000 are MB50017 - leaving the variable last four digits. If not than replace them with "MB50017"

Column AZ

MB500174443
MB500174446
NB500176554
VB401038789

The first 5 characters should always be MB50017 plus the last four digits
The column should then look like:
MB500174443
MB500174446
MB500176544
MB500178789

View 4 Replies View Related

If Then Statements: Construct A Logic Test Using The Range Of Cells

Aug 2, 2006

How do you write an If then statement using a range of cells? I want to construct a logic test using the range of cells A7:A19. I want the logic test to see if the any of the values =1. If the test is true then I want it to display the value in B7:19 (which ever cell corrulates to the cell in column A that has the value of 1) and display the number in the B column.

View 6 Replies View Related

Test And Sum The Same Range Of Cells In Each Sheet By Simply Coping And Pasting The Formula

Feb 2, 2010

On Sheet1, Row 2 I have my columns named January-December, which correspond to the names of the other 12 sheets in my workbook. I want to test and sum the same range of cells in each sheet by simply coping and pasting the formula. I am using INDIRECT and SUMPRODUCT, but is there a better way? It seems to have caused the sheet to run slowly. Perhaps it's just the amount of data. Here is an example of the formulas I am using:

=SUMPRODUCT((INDIRECT("'"&B2&"'!$B$3:$B$200")=$A$2)*(INDIRECT("'"&B2&"'!$C$3:$C$200")="Yes")*(INDIRE CT("'"&B2&"'!$E$3:$E$200")))

This gives me the intended result. B2 in this case is January. C2 is February and so forth.

View 3 Replies View Related

Initialize Error "Sub Userform_Initialize" With Multiple Comboboxs & Lists

Oct 1, 2008

I have a userform used to insert new vehicle details onto a spreadsheet. below is the code used in two of the boxes to choose the service intervals and the engine type. There is another combobox on the form, however when I try the same type of code for more than 1 box I receive an error on the "Sub Userform_Initialize" line. I assume I need to change something on the 'Sub' line but I cannot figure out what!!

View 2 Replies View Related

Test X Conditions In Conditional Formatting: Highlight Cells Is Two Conditions Are Met

Oct 17, 2007

I would like to highlight cells is two conditions are met:Cell = 0Offset(0,-1)>0I tried the conditional format wizard and entered a formula: =IF(AND($J2=0,$I2>0)) But I keep receiving formual errors, which I understand, because it appears to be incomplete formula. But I am not sure what else I need to add to the formula in the conditional format wizard

View 2 Replies View Related

Lock Cells Based On Value Of Other Cells - Code Simplification Query

Apr 22, 2009

I'm using the code below to lock certain cells depending on the value of other cells. The code below deals with one line of my spreadsheet only and as the spreadsheet comprises 38 data entry rows I've repeated this code 38 times in the worksheet module with the appropriate changes to row numbers.

It works, but causes much screen flickering and "thinking". I'm new to vba so no doubt I've made this code too extensive or lengthy or whatever (or just plain wrong).

Can anyone assist with suggestions on how to simplify the code and/or help with code to handle all 38 lines without repeating the routine 38 times?

View 7 Replies View Related

VBA Code To Subtract Data In 7 Paired Cells To Be In New Cells

Jun 6, 2013

My data is like this

A
B
C
D
E
F
G
H

[code]......

now i want after the last data column to put formula "= ROUND((C2-D2)/100000,2)" in S2 similary "= ROUND((E2-F2)/100000,2)" in T2 using VBA till all data colimns upto column R are used in subsequent columns

I tried following code

Sub tot()
' This subtracts credits from debits and divides by 100000
Application.Goto Reference:=Range("s4")
Dim dr, cr, clmn, ansclmn, cln As Integer
For ansclmn = 19 To 26

[code]....

View 1 Replies View Related

Test For Next Available Row

Feb 10, 2007

I am trying to test for the next available row in a sheet using a range as follows:

NextRow = Range(MyRange).End(xlDown).Row + 1

If there are no rows being populated, the formula throws an error and I assign NextRow to 0 indicating no entries present

However, and this is my question, if there is one row populated the value for next row seems to either give 0 or 65637.

After this, the code runs OK.

View 9 Replies View Related

Test If A Cell Has #N/A

Nov 9, 2009

How do I test if a cell has #N/A?

View 4 Replies View Related

How To Test A Formula To See If Particular Value Is Used Or Not

Jun 27, 2013

From a large worksheet I'm trying to find out if a particular value is used in that formula. E.g. formula: (In cell C1)=A1+B1*.75

I want to check if .75 is used in the formula (which is 75%) There are 1000's of record would it be possible to check the entire column C

View 6 Replies View Related

How To Test If Value Is Integer

Apr 9, 2004

I am using the IsDate() and IsNumeric functions in my VBA code. Is there an equivalent function for testing if a value is an integer?

View 5 Replies View Related

Formula To Test A Value

May 11, 2007

I'm having an intelligence lapse and I need help with a formula

Simply need to return a "1" if value in Cell X is equal to or greater than -(minus)4% and a "0" if value is less than -(minus)4%.

View 9 Replies View Related

Timing A Test

Jul 16, 2008

I have a 32 question test that I expect everyone to get most (if not all the answers correct. I have a cell that is counting the number of correct answers.

What I want to do is start a timer when the first correct answer is put in and stop when the last answer is put in. So essentially, I need a way of looking at a cell and starting a timer when it equals one and stopping when it hits 32.

View 9 Replies View Related

Test To See If The Autofilter

Mar 19, 2009

How i can test to see if the autofilter, while enabled, is not currently filtering?

View 9 Replies View Related

Cochran's Test

Jan 23, 2007

how to perform Cochran's Test in Excel?

I know it's probably available somewhere as an add-in, but we aren't allowed to install any, so we have to do it from scratch.

Basically, I'm have to set up a spreadsheet to look at "Between Laboratory Outlier Tests", and Cochran's test is one of them.

Also, how would I calculate the Cochran Critical Values for a given set of laboratories and replicates?

View 3 Replies View Related

Test If Array

Apr 25, 2007

I am currently working on code that uses either arrays or ranges. I often resize local array based on the dimensions of the input. However, I am running into trouble because arrays use ubound for dimensions, but ranges use ether rows.count/columns.count or ubound on value2. How can I determine whether a variable is an array or a range. the IsArray function happily passes a range variable, so that doesn't work.

View 2 Replies View Related

Test For Date

Jul 25, 2007

I have a defined range Picku_time and this function fails
=isdate(range("Pickup_time"))
it gives the =#Name?

View 3 Replies View Related

VBA Code To Compare Cells To Multiple Cells

Aug 24, 2012

So I have a sheet with 600 or so rows of data on a sheet called "Agent_Summary". On another sheet in the same workbook I have a list 20 peoples names. I am trying to find a way to look at the 600 or so lines on the Agent_Summary in column A and see if the name in that cell matches any of the 20 names from the "Team" Sheet. If the name on Agent_Summary is not found on the "Team" sheet then it clears the contents of that cell and moves on. Then it comes back and Deletes the blank rows. I can make it look for any 1 of the 20 names and the code works fine. How do I turn it into something that will look for any of the 20 names?

Here is my code to look for 1 of the 20 names that works great.

Code:
Sub Clean_up_Agent_Summary()
Dim Cell As Range
Dim R As Long
Dim RE As Object
Dim Rng As Range
Set Rng = Worksheets("Agent_Summary").Range("A5:A600")
Set RE = CreateObject("VBScript.RegExp")

[Code]...

"Worksheets("Team").Range("A5")" is where my 1 name is and the rest are just below that. I am thinking some kind of an Array but I am stuck on getting that set up and working right.

View 6 Replies View Related

Function To Test For Whole Numbers

Jan 22, 2009

I have a resolution calculator that I am working on.

You put your original resolution in say 1440x1080

then below you put in any one of the new target resolutions.

Place 720 in the height and you get a message that says

"960 is your new matching Width resolution"

Id like to follow up on that with an if statment that test to see if the cell is blank if it is then null, if not then test 960 in this case to see if 960/16 = a non decimal number.

So in the cell to the right of that sentence it would return the result
"and 960 is 16 pixel safe" something like that.

I can probably figure out how I will handled the cell arrangement, numbers, and text I just for now need to find a way to do a test on whole numbers and return a text value (my guess is an if statement)

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved