From a large worksheet I'm trying to find out if a particular value is used in that formula. E.g. formula: (In cell C1)=A1+B1*.75
I want to check if .75 is used in the formula (which is 75%) There are 1000's of record would it be possible to check the entire column C
I am trying to determine Long Term Gain (LTG,) Long Term Loss (LTL,) Short Term Gain (STG,) Short term Loss (STL,) or No Loss nor Gain (NGL)testing two cells (A1 and B1)and setting a third cell (C1) to the text LTG, LTL, STG, STL, or NGL depending on the results of testing cells A1 and B1.
A1 represent a number of years and B1 represent gains or losses (negative)in dolars.
The way I see the logic is as follows:
If cell A1 or cell B1 are either one of them equal to 0, then it is neither a Gain nor a Loss (NGL.)
If cell A1 is greater than or equal to 1, then it is Long Term; else, if A1 is greater than 0 and less than 1, then it is Short Term.
On the other hand, if cell B1 is greater than 0, then it is a Gain; if B1 is less than 0 (a negative number,) then, it is a Loss.
I need to find (if it is posible in Excel) one formula to test the two cells for posible outcomes:
If A1 = 0 then C1 = NGL
If B1 = 0 then C1 = NGL
If A1 >= 1 and B1 > 0 the C1 = LTG.
If A1 >= 1 and B1 < 0 the C1 = LTL.
If A1 < 1 and B1 > 0 then C1 = STG
If A1 < 1 and B1 < 0 then C1 = STL
I'm having an intelligence lapse and I need help with a formula
Simply need to return a "1" if value in Cell X is equal to or greater than -(minus)4% and a "0" if value is less than -(minus)4%.
I am creating a spreadsheet to monitor horse race betting but my formulas aren't coming out right.
The problem is to do with adding winnings to a running balance or minusing each bet's stake money from the running balance if the bet loses.
I have two formulas that are giving me a problem, both are in the P column in the attached spreadsheet. The first one, located in row 2, being slightly different as it is the first data row and so contains the starting balance in the formula.
=IF(OR(J2="W",J2="P",300+S2),IF(J2="L",300-O2,"")).
This produces a blank or error result.
=IF(OR(J3="W",J3="P",P2+S3),IF(J3="L",P2-O3,""))
This produces an error whatever is in the J column
I need to take a specific action when a cell has an actual formula in it versus when it just has a "value". Is there a procedure or command which will allow me to identify if a certain cell has a "formula" (like =sum(a1: a5) ) or just a value.
View 3 Replies View RelatedI teach history to four different groups of students that, in my spreasheet, I have labeled "1", "2", "3", and "4." The number of the group to which each student belongs is listed in CK2:CK100
Each quarter, I give all students a test and list the corresponding score next to each student's name. The scores are listed in CM2:CM100.
The name of each student appears in CL2:CL100.
I am looking for the formulas to extract the highest five scores in each group starting at CS2. So CS2 would contain the value of the highest score obtained by a student in group 1, CS3 the second highest score in that group and so on through group 4.
Is there formula to use if I want an IF statement to add a date "TODAY()" to a cell if a corresponding cell is highlighted? I would search for this in the archives if I had a clue what to search for. "Conditional formatting", maybe?
In Col J "Appt. Date", I want to add today's date if the cell in Col C of that row is green.
How would that work? My worksheet is posted below: ......
I'm trying to create a formula that will determine the bonus (%) for sales made. Here's the table:
<10000 sales = 0% bonus
>=10000 sales but <=29999 sales = 5% bonus
>=30000 sales but <=to 44999 = 7% bonus
>50000 sales = 10% bonus
Since the sales and bonus figures are subject to change each year I'd like the formula to point to the numbers but that part seems easy if I can get the formula right.
I have my test cases in below format and I would like to calculate # of test cases passed or failed using formula.
-------------------------------------------------
Test case #Step #Result
-------------------------------------------------
Test case 1Step 1pass
Test case 1Step 2pass
Test case 1Step 3fail
Test case 2Step 1pass
Test case 2Step 2pass
Test case 2Step 3pass
Test case 2Step 4pass
Test case 3Step 1fail
Test case 3Step 2fail
I need below result using formula:
# of test cases - Pass = 1
# of test cases - Fail = 2
I need a function that will use a column of text values and test these values
to see if one or more of the values exist in a single cell. If it does I need
the function to return true or false.
Ie. cell A1 contains the text "Jim Smith" the B column contains the test
names (column of test values ) ie. B1 is "bill" B2 is "fred" B3 is "jim".
Because Jim is in the cell A1 I would need the function in C1 to return the
value "true". If A1 contained the text "bob smith" then function in C1 would
return the value "false".
On Sheet1, Row 2 I have my columns named January-December, which correspond to the names of the other 12 sheets in my workbook. I want to test and sum the same range of cells in each sheet by simply coping and pasting the formula. I am using INDIRECT and SUMPRODUCT, but is there a better way? It seems to have caused the sheet to run slowly. Perhaps it's just the amount of data. Here is an example of the formulas I am using:
=SUMPRODUCT((INDIRECT("'"&B2&"'!$B$3:$B$200")=$A$2)*(INDIRECT("'"&B2&"'!$C$3:$C$200")="Yes")*(INDIRE CT("'"&B2&"'!$E$3:$E$200")))
This gives me the intended result. B2 in this case is January. C2 is February and so forth.
Using Excel 2013,
It trying to see if the Month() of a date is in a Array / Range
I tried =IF(MONTH(E8)={2,6,9,11},"Yes","No") where E8 = 9/30/12
I'm trying to use the following IF formula:
=IF(J2>$J$143 and J2<$J$144,"1","0")
But it doesn't work - I obviously have the formula wrong. The problem arises with the inequality. how to have two conditions within the "logic test".
I am trying to test for the next available row in a sheet using a range as follows:
NextRow = Range(MyRange).End(xlDown).Row + 1
If there are no rows being populated, the formula throws an error and I assign NextRow to 0 indicating no entries present
However, and this is my question, if there is one row populated the value for next row seems to either give 0 or 65637.
After this, the code runs OK.
How do I test if a cell has #N/A?
View 4 Replies View RelatedI am using the IsDate() and IsNumeric functions in my VBA code. Is there an equivalent function for testing if a value is an integer?
View 5 Replies View RelatedI have a 32 question test that I expect everyone to get most (if not all the answers correct. I have a cell that is counting the number of correct answers.
What I want to do is start a timer when the first correct answer is put in and stop when the last answer is put in. So essentially, I need a way of looking at a cell and starting a timer when it equals one and stopping when it hits 32.
How i can test to see if the autofilter, while enabled, is not currently filtering?
how to perform Cochran's Test in Excel?
I know it's probably available somewhere as an add-in, but we aren't allowed to install any, so we have to do it from scratch.
Basically, I'm have to set up a spreadsheet to look at "Between Laboratory Outlier Tests", and Cochran's test is one of them.
Also, how would I calculate the Cochran Critical Values for a given set of laboratories and replicates?
I am currently working on code that uses either arrays or ranges. I often resize local array based on the dimensions of the input. However, I am running into trouble because arrays use ubound for dimensions, but ranges use ether rows.count/columns.count or ubound on value2. How can I determine whether a variable is an array or a range. the IsArray function happily passes a range variable, so that doesn't work.
View 2 Replies View RelatedI have a defined range Picku_time and this function fails
=isdate(range("Pickup_time"))
it gives the =#Name?
I am using the formula below to return a blank cell if either logical test returns true but apparently the OR operator returns a #VALUE error when applied to a non numeric value in a cell - in this case cell E40. =IF(OR(E40="N",P40=""),"", SUM(P40,S40,V40,Y40,AB40,AE4))+F40. My goal is to return a blank cell if E40 contains the letter N or P40 is blank, otherwise perform SUM(P40,S40,V40,Y40,AB40,AE4))+F40.
View 4 Replies View RelatedI have a resolution calculator that I am working on.
You put your original resolution in say 1440x1080
then below you put in any one of the new target resolutions.
Place 720 in the height and you get a message that says
"960 is your new matching Width resolution"
Id like to follow up on that with an if statment that test to see if the cell is blank if it is then null, if not then test 960 in this case to see if 960/16 = a non decimal number.
So in the cell to the right of that sentence it would return the result
"and 960 is 16 pixel safe" something like that.
I can probably figure out how I will handled the cell arrangement, numbers, and text I just for now need to find a way to do a test on whole numbers and return a text value (my guess is an if statement)
Under what conditions does a simple logical test, like
View 5 Replies View RelatedI am trying to find a script where I can see information more clearly. I am trying to copy certain cells and have them into a single row. For example, everytime the word USER comes up, I want that in a single row and all the information that comes after it and below to be in the same row. So I would want all this information in a single row. And it would start a new row when the word USER comes up. I will attach an excel table for an example. Working progess.xlsm
1READY
LU*
USER=irrcertaNAME=CERTAUTHAnchorOWNER=irrcertaCREATED=01.097
DEFAULT-GROUP=PASSDATE=00.000PASS-INTERVAL=N/APHRASEDATE=N/A
ATTRIBUTES=REVOKED
REVOKEDATE=NONERESUMEDATE=NONE
LAST-ACCESS=UNKNOWN
CLASSAUTHORIZATIONS=NONE
NO-INSTALLATION-DATA
[Code]...
How can I open Book2.xls (in the same folder) in 'read only' mode, using a macro from Book1.xls? Book2 might already be open or it may not. I then need to return control to Book1.
View 13 Replies View RelatedI have a number of entries in column A.
The format is:
A1 B680192 Middle School
A2 Office Building Project
and so on;
I want to test if char.s 2 through 7 are numbers.
I can seperate one char at a time and use CODE function to check if the result is between 48 and 57.
I know how to split all six char.s at a time e.g. 680192, but I don't know how to test to see if it is a number?
ISNUMBER function doesn't work.
If I can do it with excel function, it would be better. If VBA has to be used, so be it.
How do I test to see if a workbook of a given name is open in my Windows session?
View 4 Replies View RelatedI need to test whether an optional Range has been passed to a UDF. IsMissing(RangeName) always returns False regardless of a range being given or not. RangeName exists as an Object that shows a Value of Nothing and Type of Range. I have not found any test that will indicate if the Range was passed in or not.
View 4 Replies View Relatedis there a way to test if a list exists on a sheet? I'd like to do something like this:
View 2 Replies View Related