I have Userform and It worked fine, but now I included merged cells on worksheet and nothing works anymore.
Userfrom is for employees work schedule.
Userform has combobox to select a day in month, and then listbox gets filled with data for that day.
First problem is that when selecting index from Combobox, worksheet should move to a selected day to left side of Userfom. It worked, but now merged cells are problem.
Second problem is that listbox doesn't show entries properly. Under label ""Job title" there should entries for each employee, now It shows only entry for first one.
And third problem is that I don't know how to fill listbox with start/end values, that should be under "Start/End" label. For now I only have Start time in listbox, but there should be both together like "06:00-14:00".
I tried with this but not working:
[Code] ........
I also noticed that Combobox doesn't show names correctly, 1st of month is listed twice, with different days.
I'm working on doing some data analysis on an excel workbook that comes from a tracking website's reporting system. The data is inconsistently merging some cells in rows where there are multiple entries in a column, and on other cases is not merging those cells.
The format of the spreadsheet is as follows:
A B C
1 Account # Current Services Order Status
2 1234 PACK1 Completed
[Code] ....
In this example, cells A3:A5 have been merged by the reporting system's export function, but B3:B5 were exported as individual cells. On the other hand, cells A6:A12 are not merged into a single cell.
My goal is to look at the values in column B for each account and compare them to an array of service package codes and to see if any values in B match value in that array for each account number. If the system of cell merging was being consistently applied across all cells, I could figure out a way to link the results for each group of cells in column B to the account number they match up to, but since there are some account numbers that are in unmerged cells, I'm not sure what to do.
I can't alter the way the reporting system exports its data to Excel format, so how to deal with a mixture of merged and unmerged cells in column A. How I could do this without a lot of manual adjustments?
following on from previous post (http://www.excelforum.com/excel-prog...g-up-form.html) what if the selected cell is a merged cell (cell count is greateer than 1), what is the best solution to enable double click event on merged cell ?
I have a userform that has 1 combobox and 2 text boxes. i need the two text boxes to go to specific row and a specific column based on the entry placed in the combobox.
I can move data from a userform to a database if i am adding it to the next row, but here, there already is data and i want to add to existing data.
I tried application.match, to find the text in the combobox, but i can't seem to figure out the syntax to add it to column 13 on the same row.
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU() ' ' CopyICUCAPU Macro ' Dim i As Integer
I'm working on a workbook to track staffing patterns. I have two userforms included in my workbook. The first userform (userForm2) initiates upon opening the workbook. It's intended to allow the user to enter a date range and an office location for the report. The second userform (userform1) initiates when a command button (Weekly Summary) is clicked. I've linked texts boxes in userForm2 to cells in a hidden worksheet; this is where I'm holding the dates and office location until userform1 is initiated. I also have labels in userform1 linked to the same cells in the hidden worksheet so that when userform1 is initiated the office and date range appear at the top of userform1.
Here's the problem, when I click command button "Weekly Summary" the office location shows up perfectly however, the labels I have linked to cells in the hidden worksheet that contain dates do not update (i.e. they show the dates that were previously in those specific cells. I have to close userform1 and re-open it to get the dates to update.
I need the user to be able to choose a date range and office location when they enter the workbook. Then, I need userform1 to show the date range and office location (without having to open it, close it and re-open it) that the user chose on opening the workbook.
I have created a software on a userform and have copied contents of this userform to worksheet cells. However when I run it for the first time everything works and all contents goes in C4 - C8. However when I run it for the second time the contents in C4 - C8 deletes itself and new data appear i.e. the cells are overwritten.
In cell C3 i have the date and I have managed to put this date in the next empty column everytime the software is run. I do not understand why the dates can go to the next empty column without it being over written but cells C4 - C8 cant!
I am looking for a code that will clear all of my unlocked cell in sheet 1. That is not a problem but since many of the cells are merged I know it keeps throwing me an error saying cannot change contents of merged cells or something like that. Does anyone know how to get around this without unmerging the cells. I saw a code to unmerge all of the cells on a sheet but I really don't want to do this as I already have worked around most of my problems with the merged cells.
I have a spradsheet that I've formatted using merged cells. The spreadsheet has several columns. Into these columns I must enter raw data extracted from our SAP data base. The extraction worksheet has no merged cells. So bottom line, I have a column of say, 30 non-merged cells and I want to paste that column into my formatted spreadsheet that has 30 merged cells of thre cells a piece (90 cells total).
So far I have been unable to do this. If I've attached it correctly, the sample attached
Im having problems trying to sort through data and linking certain data. I will post example below:
Main 1 Main 2 Main 3 Sublevel 1-4
[Code]....
This is just one part of a row of the workbook but shows the Main data which is made up of 4 different sub levels on the right. I merged 4 cells for the main data so that all the cells lined up but I'm still having problems with being able to sort and link the files together so that when I filter, they all do it together. The example didn't paste well.
i have a problem to sort merged cells in the file attached. i tried via macro but could not reached a good solution. I have 30 plans inside the sheet and even manually is too hard to do it because i use some "=" to not type again every number since some are the same but when i try to sort the lines became diferent values.
I now see why alot of you dont like merged cell's. What i am trying to do is Cut and paste a range that contains merged cells. A kit can be created using the Button on the sheet. The cells in column G are merged down to the last kit item. On Row A of the kit the 1st cell contains data validation once the Delete kit cell is re-entered it removes the selected kit from the sheet. Then will select all kits below the (now deleated one) and cut the range, and paste it to where the old kit was located.
When the kit's are pasted into the new location there are issues with the merged cells in column G. Is there a way to fix this issue, or know of another approach to keeping the same layout.
I have exported a report to Excel from a BI tool called ZAP.
Unfortunately the cells in the columns are merged by group eg. salesperson, product, country.
I need to be able to filter by each of the columns - the only way i can think of is to unmerge and copy the information to the rest of the "merge area".
This will be extremely time consuming as there are more than 1000 rows and at least 5 columns that I want to filter.
Sales PersonCountryCustomer NameProduct Model DetailJohn WUNITED KINGDOMAPCBasicPremiumStandardStAPLAccessoriesAcrylic FsPremiumFsStStyAPOAccessoriesPremiumStandardStAPMFsPremiumStandardSt
I have a spreadsheet that has merged cells on that is typed into.
I have a Macro that pulls the information into another sheet and then it tries to clear the cells for the next person to fill in. The issue I am having is that i cant clear the merged cell. I have tried the following code
I have a table where sometimes cells are merged. To the right they are not merged, but I need to link to the value of the merged cell. How can I do it if I don't want to do it manually?
Example: Say A1:A4 is merged, A5 is just normal. I want a formula using those values, say in B1:B5. Now just filling down the formula would reference A1, A2 and so forth. This is wrong.
I have a workbook in Excel 2007 where I am creating a summation worksheet through the use of arrays which sumif and countif the other worksheets. Things went fine until about halfway through when I started getting merged cell errors. In between the calculations, I had some merged cell rows for section titles. I was not entering the array into them, but researched the error and unprotected the cells. Problem solved. Now, with 10 row to go, I started getting the error again. I unmerged the sectional title rows. I verified that the cells are not protected. However, when I ctrl+shift+enter to input the array, my formula is moving from the cell that I am inputting to, to the cell in the row directly beneath it.
I need to compare cells in two worksheets but with a difference ex: Worksheet 1 contains merged/single Cells Worksheet 2 contains single Cells Now , i fneed to compare first merged/single cell in Worksheet1 with first single cell in Worksheet2 and similarly , second merged/single cell in Worksheet1 will be compared with second single cell in Worksheet2 and so on......... Though i can use exact and compare them maually by specifying cells but since i need to make it general , suppose second time there can be some other combination of Merged cells I need to compare with Worksheet2 .
I have a merged cell area, several columns wide and 2 rows deep.
I know that pressing enter before reaching the end of the first row moves to the next cell below. Is there any method, either key combination or whatever, of moving to the next row within the merged cell?
I have the following VBA script that merges 2 cells together, but at the end of the merge I need it to add the filename and path of the active workbook.....
Sub Merge() Dim Cell_e, Cell_Sheet1 As Variant Dim R, C As Integer 'This Macro is add the Test condtion and the precondtions together in 1 cell, before they are exported to TD
Sheet2.Select R = 11 C = 9 Do Until Sheet1.Cells(R, 9).Value = "" Cells(R, 9).Select Cell_Sheet1 = Sheet1.Cells(R, 9).Value Cell_e = Sheet2.Cells(R, 7).Value Sheet2.Cells(R, 7) = "Test Condtion: " & Cell_Sheet1 & Chr(10) & Chr(10) & "Test Preconditions " & Cell_e R = R + 1 Loop
I have read the posts regarding merged cells and understand they should be avoided, but I am working with spreadsheets created by others. My problem is that I need to sort the data, but some of the cells are merged so it won't work. Is there a macro command to easily find the merged cells and unmerge them?
I am conditional formatting with fill colour based on specific text- the cells are merged down into a double cell- when the cell changes colour it goes half one colour and half another colour based on the order i have them in the rules- i only have them set to one colour per specific text and the text is all different- so why am i getting this half and half look?
I have a pair of workbooks in which one calculates a number of values and I want to store the values only in the other.
I would expect to be able to highlight the range of the calculated cells in the source workbook, Copy and then Paste Special | Values in the other.
Both the source and the target contain some merged cells. When I try to do the paste, it complains that "this operation requires the merged cells to be identically sized".
They are identically sized.
I have even done Paste Special | Column Widths to guarantee they are identically sized. It doesn't complain about the merged cells then; in fact, it doesn't complain about the merged cells with any of the other paste operations, only with Values.
I have been able to repeat the behaviour with a very simple example. See the two attached sheets. Try pasting Values only of the range $B$2:$D$4 from either one to the other.
When I first created the samples they worked. What seemed to triggered it is I changed one of the merged column widths by one pixel, tried expecting it to fail (and it did), changed that column width back again and it hasn't worked since. As I said, I even tried pasting the Column Width to the target, which it appeared to do successfully, but it hasn't helped.
Now, the attached examples are only to show the principle of the problem. They are very simple and there would be a myriad alternative work-arounds for them. In my original case though there are many formulae over a much larger range and I want other people to be able to paste values without having to follow complicated instructions, so I am not looking for work-arounds unless someone has a mind-numbingly simple one that my numb mind has overlooked.
The only other way of solving the problem that I can think of would be to write a macro that copies cell values individually, but I'd rather not do that because I know these people: they will get narky about having to enable macros. It will be "against organisation policy" or something.
Is there any way of resetting the target workbook so that it will receive the values from the source?
I've just created a spreadsheet that we will be using as a project review form. In this spreadsheet I have multiple rows of merged cells, column D to N, for comments. I need these comment areas, merged rows, to autofit whatever is cut and pasted or typed into them.
The first problem is cutting and pasting from a pdf. All of the documents we received for the projects we bid are in pdf format. We often cut and paste from those documents into an older version of our review sheet that was built in Word. Trying to cut and paste the same information into Excel ends up in failure. Is there a way that this can be done without jumping through hoops?
The second problem I’m running into is when I cut and paste into a comment area I get the typical Excel error message that the information being pasted does not fit the area it is being pasted into. It there a workaround for this?
My third problem is autofitting the pasted information into the merged cells. I’ve seen some VBA and tried a couple but they don’t work automatically when the comments area is filled. How can I do this? I don’t know VBA. I'm using MS Office 2003
I have a VBA form that I would like to assign to a cell, but it's a merged cell. When I do this, the form does not run. If I assign it to a single cell, it runs fine. Is there a trick to tell the macro that the target address is a merged cell?
I finally have the merged cells resizing the way I need, however it seems to lock the cell after the process not allowing it to be edited again until I unlock the sheet. below is the current code I am using
I have a macro where somone fills in a form and then it copies the data in the form to a database (another worksheet). Once the macro is run and has copied the form to the database, I then clear each cell seperately using the below code :-
Is there any quick and easy way to unmerge merged cells and put the merged cell value in all the merged cells. For example, if I have A6:A15 merged together and its value is "FirstMerge" then I would like to unmerge all A6:A15 and then put "FirstMerge" in all the cell A6,A7,A8 etc. etc. upt oA15. I have lot of these merged cells in a sheet and I get this every month and makes any data processing very difficult. A macro or VBA code or any other solution will be fine.
