I have a macro where somone fills in a form and then it copies the data in the form to a database (another worksheet). Once the macro is run and has copied the form to the database, I then clear each cell seperately using the below code :-
View 5 RepliesI have a target range for a worksheet change. Then when finished I highlight the data and press 'delete' I get an error within the code.
View 2 Replies View RelatedI'm looking to look up sheet name based on a date, then look the date up within that sheet which is a merged cell, then return the figure in the corresponding cell.
I have a sample worksheet to attach, just have to work out how to do it.!
In the sheet "Cashflow Summary" in cell E24, i want to lookup the sheet name based on the value in C22 (merged cell), then lookup the date in that sheet (6 August 2014), and return the value in cell y8.
The difficulty is with firstly the merged cells, but also performing the lookup over a number of different arrays, as the sheets for each month, have the months listed under each other in rows of 5 days at a time.
I have a spreadsheet, similar to the one attached, that monitors deliveries. The reasons for deliveries not being made on time are merged across to have one reason per delivery vehicle.
I am trying to count the number of times a reason occurs, but utilizing a COUNTIF function it will only count a merged cell as one count, rather than per each delivery.
Merged Count if examples.xlsx‎
how to code to specify a cell in which to enter data into a spreadhseet, when the heading contains only one row.
In the attached example the headings contain multiple rows with merged cells, is there any way of overcoming this so that the entries are placed in the correct cells?
I have a spreadsheet that has I have protected. On this sheet I have a button labeled Reset Form. When you click the button it it goes to each Unprotected Cell and deltes the contents. I created this by starting the macro and then tabbing to each and every cell and deleteing the contents I then ended the macro...
Is there a code that I can use for to clear all unprotected cells as opposed to creating the macro manually?
My computer runs on Excel 2003 but my Laptop is on Excel 2000, the problem is I have the below code on a spreadsheet I wrote on my Computer which runs fine but when I open it on my Laptop it comes up with a run time error it doesn’t like the clear contents line. If some one could explain to me why it is happening and how to get round the problem so it will work in Excel 2003 and 2000.
Private Sub Workbook_Open()
Application. ScreenUpdating = False
Sheets("data").Visible = xlVeryHidden
Sheets("Incidents").Visible = xlVeryHidden
Sheets("Front Sheet").Select
Range("A17:S17").Select
Selection.ClearContents
Open1.Show
Range("A17").Select
Application.ScreenUpdating = True
End Sub
I am trying to clear the contents of cells in a very large spread sheet containing certain words. I am running the following macro and it will only do the first part, so it will clear cells containing "deceased" but stops at "esa". There may be any number of other words or text in the cell and I want it to delete cells with "esa" by itself so for ex. not delete cell containing "vanesa". I am very amateur so I am sure this is something simple but I cannot find the answer or figure it out for myself.
Sub DeleteAll()
Dim lCount As Long
Dim rFoundCell As Range
Dim rLookRange As Range
Set rFoundCell = Range("A1")
Set rLookRange = ActiveSheet.UsedRange
For lCount = 1 To WorksheetFunction. CountIf(rLookRange, "*deceased")
Set rFoundCell = rLookRange.Find(What:="deceased", After:=rFoundCell, _
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
rFoundCell.ClearContents.......................
I have cells, or columns hidden when I do not need them, but I have to a data entered in those cells to make my spread sheet work. Usually just 0.
When I do the all clear or " clear all contents" operation at the end of the day, it clears the hidden data/cells too. Is there anything I can do to stop excel from clearing those hidden cells?
I have compiled the following code with bits from here there and everywhere to clear the user entered details on a form. My problem is that I need to retain or reset to "Please Select" the cells with drop down lists.
In list form, I am trying to;
Unprotect the worksheet,
Select the cells with drop down lists and lock them,
Delete the contents of unlocked cells,
Selecting and unlocking the cells with the drop down lists ready for re-use,
Re-protect the worksheet.
(I probably should mention that my "Form" is just a formatted worksheet that looks like a form on the screen and when printed, not any sort of inbuilt Excel function that I have read about somewhere, probably here)
Code:
Sub ClearUnlockedCells()
'
' Clearform Macro
' Clear entered data from Form.
'
Dim WorkRange As Range
Dim DVRange As Range
[code].....
I've created (with the help of jmthompson from here) a macro to pull an entire row of data and copy to another sheet (Sheet1) if column U has "YES" in the cell.
Now I need to clear the contents of cells in range B-U after the copy has occurred.
Here's the current macro: ...
I created a macro to clear cells but I can't get it to clear a number of ranges. It will only clear single ranges.
Sub DeleteStuff()
Dim c As Range
For Each c In Range("G6:G10", "H6:H10", "J6:J10")
If c "" Then c.ClearContents
Next c
End Sub
I have a workbook with a series of sheets that have tables for entering data. The table row and column labels and formulas in certain cells of each sheet are locked and some sheets are hidden.
When opening the file I want to clear all cell contents (interior color, comments, data, etc) in all the unlocked cells on each sheet that is not hidden.
I tried protecting the sheets first so only the unlocked cells would be accessible, but when I run the code below I get an error saying that the clear contents etc. cannot be performed because the sheet is protected. If it is not protected, everything gets wiped out.
How can I keep the locked stuff but clear the unlocked cells?
For Each ws In ThisWorkbook.Worksheets
If ws.Visible = xlSheetVisible Then
ws.Protect Password:="aaa" 'Protect each sheet
ws.Cells.ClearContents 'clear content of any unprotected cells
ws.Cells.ClearComments 'clear any cell comments
ws.Cells.Interior.ColorIndex = 0 'set background colour to no fill
Active.Cells.Range ("a1") 'make the active cell the top left
End If
Next ws
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
I am looking for a code that will clear all of my unlocked cell in sheet 1. That is not a problem but since many of the cells are merged I know it keeps throwing me an error saying cannot change contents of merged cells or something like that. Does anyone know how to get around this without unmerging the cells. I saw a code to unmerge all of the cells on a sheet but I really don't want to do this as I already have worked around most of my problems with the merged cells.
View 14 Replies View RelatedI have a spradsheet that I've formatted using merged cells. The spreadsheet has several columns. Into these columns I must enter raw data extracted from our SAP data base. The extraction worksheet has no merged cells. So bottom line, I have a column of say, 30 non-merged cells and I want to paste that column into my formatted spreadsheet that has 30 merged cells of thre cells a piece (90 cells total).
So far I have been unable to do this. If I've attached it correctly, the sample attached
MERGE EXAMPLE.xls‎
Im having problems trying to sort through data and linking certain data. I will post example below:
Main 1
Main 2
Main
3
Sublevel 1-4
[Code]....
This is just one part of a row of the workbook but shows the Main data which is made up of 4 different sub levels on the right. I merged 4 cells for the main data so that all the cells lined up but I'm still having problems with being able to sort and link the files together so that when I filter, they all do it together. The example didn't paste well.
I am using excel as a base for formatting reports, and collating logical paragraphs, which I want to display in one massive merged cell on another worksheet.
The paragraphs are different for each report, and I do not wish to manually enter them in each time. I also want them to display as seperate paragraphs on the page, but in the same cell.
To throw a spanner in the works, the paragraphs are all of indeterminate length, otherwise, I could use different cells. If I combine them in the massive merged cell by using =cell1&cell2&cell3 then they will just appear merged as one whole huge paragraph. I want them to appear as separate paragraphs in the same big cell.
i have a problem to sort merged cells in the file attached. i tried via macro but could not reached a good solution. I have 30 plans inside the sheet and even manually is too hard to do it because i use some "=" to not type again every number since some are the same but when i try to sort the lines became diferent values.
View 10 Replies View RelatedI now see why alot of you dont like merged cell's. What i am trying to do is Cut and paste a range that contains merged cells. A kit can be created using the Button on the sheet. The cells in column G are merged down to the last kit item. On Row A of the kit the 1st cell contains data validation once the Delete kit cell is re-entered it removes the selected kit from the sheet. Then will select all kits below the (now deleated one) and cut the range, and paste it to where the old kit was located.
When the kit's are pasted into the new location there are issues with the merged cells in column G. Is there a way to fix this issue, or know of another approach to keeping the same layout.
I have merged cell C2:C9. When I insert formula =C5, it returns 0. How do I make it to return the actual value?
View 11 Replies View RelatedI have exported a report to Excel from a BI tool called ZAP.
Unfortunately the cells in the columns are merged by group eg. salesperson, product, country.
I need to be able to filter by each of the columns - the only way i can think of is to unmerge and copy the information to the rest of the "merge area".
This will be extremely time consuming as there are more than 1000 rows and at least 5 columns that I want to filter.
Sales PersonCountryCustomer NameProduct Model DetailJohn WUNITED KINGDOMAPCBasicPremiumStandardStAPLAccessoriesAcrylic FsPremiumFsStStyAPOAccessoriesPremiumStandardStAPMFsPremiumStandardSt
I have a spreadsheet that has merged cells on that is typed into.
I have a Macro that pulls the information into another sheet and then it tries to clear the cells for the next person to fill in. The issue I am having is that i cant clear the merged cell. I have tried the following code
Code:
Sheets("Coach").Select
Cells(18, 2) = ""
Range(Cells(18, 2), Cells(26, 11)).ClearContents
Sheets("Coach").Cells(18, 2).ClearContents
I have a table where sometimes cells are merged. To the right they are not merged, but I need to link to the value of the merged cell. How can I do it if I don't want to do it manually?
Example:
Say A1:A4 is merged, A5 is just normal. I want a formula using those values, say in B1:B5. Now just filling down the formula would reference A1, A2 and so forth. This is wrong.
when i try to link a merged cell to retrieve result, i get cell ref for both cells, i only like to see B7 not B7:E7.
Summary C708 Spreadsheet FormulasCellFormulaC7='Abode Homewares Pty Ltd'!B7:E7 Excel tables to the web >> Excel Jeanie HTML 4
I have a workbook in Excel 2007 where I am creating a summation worksheet through the use of arrays which sumif and countif the other worksheets. Things went fine until about halfway through when I started getting merged cell errors. In between the calculations, I had some merged cell rows for section titles. I was not entering the array into them, but researched the error and unprotected the cells. Problem solved. Now, with 10 row to go, I started getting the error again. I unmerged the sectional title rows. I verified that the cells are not protected. However, when I ctrl+shift+enter to input the array, my formula is moving from the cell that I am inputting to, to the cell in the row directly beneath it.
View 3 Replies View RelatedI need to compare cells in two worksheets but with a difference ex:
Worksheet 1 contains merged/single Cells
Worksheet 2 contains single Cells
Now , i fneed to compare first merged/single cell in Worksheet1 with first single cell in Worksheet2 and similarly , second merged/single cell in Worksheet1 will be compared with second single cell in Worksheet2 and so on.........
Though i can use exact and compare them maually by specifying cells but since i need to make it general , suppose second time there can be some other combination of Merged cells I need to compare with Worksheet2 .
I have a merged cell area, several columns wide and 2 rows deep.
I know that pressing enter before reaching the end of the first row moves to the next cell below. Is there any method, either key combination or whatever, of moving to the next row within the merged cell?
I have the following VBA script that merges 2 cells together, but at the end of the merge I need it to add the filename and path of the active workbook.....
Sub Merge()
Dim Cell_e, Cell_Sheet1 As Variant
Dim R, C As Integer
'This Macro is add the Test condtion and the precondtions together in 1 cell, before they are exported to TD
Sheet2.Select
R = 11
C = 9
Do Until Sheet1.Cells(R, 9).Value = ""
Cells(R, 9).Select
Cell_Sheet1 = Sheet1.Cells(R, 9).Value
Cell_e = Sheet2.Cells(R, 7).Value
Sheet2.Cells(R, 7) = "Test Condtion: " & Cell_Sheet1 & Chr(10) & Chr(10) & "Test Preconditions " & Cell_e
R = R + 1
Loop
End Sub
I have read the posts regarding merged cells and understand they should be avoided, but I am working with spreadsheets created by others. My problem is that I need to sort the data, but some of the cells are merged so it won't work. Is there a macro command to easily find the merged cells and unmerge them?
View 5 Replies View Related