Unmerge Merged Cell And Put Value In All Cells
Nov 6, 2008
Is there any quick and easy way to unmerge merged cells and put the merged cell value in all the merged cells. For example, if I have A6:A15 merged together and its value is "FirstMerge" then I would like to unmerge all A6:A15 and then put "FirstMerge" in all the cell A6,A7,A8 etc. etc. upt oA15. I have lot of these merged cells in a sheet and I get this every month and makes any data processing very difficult. A macro or VBA code or any other solution will be fine.
View 4 Replies
ADVERTISEMENT
Jun 14, 2008
I have read the posts regarding merged cells and understand they should be avoided, but I am working with spreadsheets created by others. My problem is that I need to sort the data, but some of the cells are merged so it won't work. Is there a macro command to easily find the merged cells and unmerge them?
View 5 Replies
View Related
Dec 31, 2009
I have a question/problem on using Unmerge in VBA. I have a spreadsheet that in Column J has some cells/rows that are merged. I need to unmerge these cells. Not all rows have this merge, so I think there would need to be some sort of IF statement or something...but I'm not sure how to go about it.
I can say that if, for example, cell J19 is merged, it would be with K and L. Then maybe, J24 with K24 and L24 are merged. Then maybe J27 with K27 and L27....and so on. For the most part the sheet would have about 200 rows of data. But only would I find about 20 or so of these merged cells. I also have 19 excel files to do this to, or otherwise, I would just do it quick and dirty, manually-style.
As an added task, once the cells are unmerged I'd like to take the value found in cell O19 (same row as where the merge was found) and copy it into L19.
View 5 Replies
View Related
Aug 10, 2009
Seems like a dumb question but is it possible to unmerge say one "3 cell" merged cell with a value of "A" into 3 SINGLE CELLS with a value of "A"?
View 9 Replies
View Related
Nov 29, 2011
is there any vba code that I can add to my workbook sheet 'Cognos Input' to make anything I paste onto/into it unmerge on the paste key stroke.
View 1 Replies
View Related
Jan 29, 2008
I have created an excel addin, the purpose of which is to run a piece of code attached below in code section, which iterates to each cell of excel and remove merged cells. I am getting a very basic error as my addin is not able to recognize the workbook which is opened and it returns Nothing for ActiveWorkbook object....
View 9 Replies
View Related
Jan 27, 2010
I have a workbook with multiple worksheets. On some of those worksheets a have merged cells, so in order to paste new data I need to unmerge them first. Below is the code that I wrote for it. However it doesn’t work and returns “Run-time error '1004': Application-defined or object-defined error”. I looked at this post List Maximum Value From Each Worksheet and tried adding With – End With, but it failed too. As far as I understood the problem is that the Worksheets/Sheets object does not support UnMerge property, but I may be wrong. If I add ws.Activate line (test2) everything works fine.
However I was wondering if there is a way to do it WITHOUT activating the worksheets.
Sub test1()
Dim i As Integer, ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
Select Case ws.Name
Case "5 - Top Network Facilities", _
"5b - Top Arb Facilities"
For i = 0 To 9
ws.Range(Cells(2 + i * 5, 1), _
Cells(6 + i * 5, 1)).UnMerge
Next i
Case Else
End Select
Next ws
End Sub
View 4 Replies
View Related
May 16, 2007
In the attached document, there are some cells which have been merged. For instance the cells A4 thru A7 were merged as one field. if you examine B4 which is actually made up of B4 thru B7 the data contained therein is 123. Is there a way to unmerge these merged cells and have the value (in this case 123) appear in each line of the unmerged cells? If you right click and click unmerge, it unmerges okay but does not populate each line with the data which was on the original field.
View 3 Replies
View Related
Nov 8, 2013
I have many columns in my current spreadsheet but I have two columns that I want to split in to two project names.
Currently I have one column with: Project A/Project B And the second column with the total cost of Project A AND Project B combined
The thing is that I can easily just create a new line but that would mean all the data in the other Cells remain the same and the only two that will be different are the above two columns. I will be maintaining alot of rows so I was hoping I do not have to create two rows for every new item then to merge both rows in reach column every time I have to put in a new Item.
I am hoping to have for example the below
Name Comments Project Cost
-------------------------------------------------
Item 1 This item relates Project A $150
to upgrade of Project B $120
SAS system
----------------------------------------------------
Currently I have it as
Name Comments Project Cost
-------------------------------------------------
Item 1 This item relates Project A/B $270
to upgrade of
SAS system
---------------------------------------------------
View 2 Replies
View Related
Apr 6, 2013
I try to unmerge cells A1:A5 based on a value "unmerged" in cell G1.
Also if I select "merged" in cell G1 (data validation), then cells A1 to E1 will merge to a single cell A1.
View 2 Replies
View Related
Aug 1, 2007
I would like to test how many cells have been merged in a given cell. I know about the MergeCells property which returns true if the cell is merged. But how do i retrieve the number of merged cells in that cell (supposing it is merged, of course).
View 3 Replies
View Related
Jan 18, 2014
Excel 2010. I need to place picture into one cell or one big merged cell, as a background fill. picture must resize to size of cell. must be fixed in, not in front. i still need write into that cell, so it needs to be really background.
View 2 Replies
View Related
Apr 10, 2012
I have 10 columns and 18 rows. Every 2nd row might contain a number. I need to sum those numbers, however, sometimes group of cells in a row can be merged and i value of a cell is then 0.
example:
A1 to D1 merged; value 6
A3 to B3 merged; value 3
B5 to E5 merged; value 2
=sum(A1,A3, A5) would return 9 - correct
=sum(B1,B3, B5) would return 2 - should be 11?
=sum(C1, C3, C5) would return 0 - should be 8?
=sum(D1,D3, D5) would return 0 - should be 8?
=sum(E1, E3, E5) would return 0 - should be 2?
View 9 Replies
View Related
Jul 9, 2014
I am using Excel 2010 and have the problem as shown in the attached file.
Input Sheet shows the Data I have at present
Output Sheet is the desired result.
I need a macro which should create an "Output" sheet by doing the following on the Input Sheet
1)Insert a Blank Column before Column A
2)Unmerge the Region Heading and insert the respective Region Name in the newly inserted Column. Region Heading will be in Bold Font.
3)Repeat Step 2 for all Regions
4)Delete the Rows which was merged.
Please note that the number of Data Rows will vary for each Region.
I have shown two Regions for explanation purpose only. There will be several Regions in reality.
The result is shown on the Output sheet
Merge Problem - Forum.xlsx‎
View 3 Replies
View Related
Dec 2, 2009
I have a spreadsheet that has been given to me by someone else, and unfortunately it has merged cells in it that are causing some trouble. I need to have a way to unmerge the merged cells, but for the data in the merged cell to then be copied into each cell that it splits into.
I've attached two spreadsheets - unfortunately I can't really attach the real one since it has research data in it, so I've reduced the size of the file and replaced some of the text. The first file shows how the file starts off, and the file named "result" shows how I would like it to be.
My real file contains some 10,000+ lines of data, and the merged cells are of varying sizes, with no consistency to the size, so I'd like a way to automate this instead of copy and pasting into every empty cell after I unmerge them.
View 2 Replies
View Related
Aug 6, 2008
When I set a "for each cell in range" to go through the range, and if there are merged cells in this range, this will result an endless loop.
View 9 Replies
View Related
Dec 17, 2009
I have a macro to copy a merged cell from one sheet and paste it to another as a merged cell. Basically, I want to copy it AS IT IS and paste it AS IT IS. My code is below.
View 4 Replies
View Related
Jan 4, 2010
how to code to specify a cell in which to enter data into a spreadhseet, when the heading contains only one row.
In the attached example the headings contain multiple rows with merged cells, is there any way of overcoming this so that the entries are placed in the correct cells?
View 11 Replies
View Related
Apr 22, 2006
I've attached part of the file I'm working with, and can't figure out how to align the text to the top in the merged cells titled description. How do I format the cell so that if there isn't two lines of type in the description it remains aligned with the quantity and price
View 2 Replies
View Related
Aug 6, 2009
Please see the attached sheet. I have columns B through a lot (B through O in my oversimplified example). In every 7th row in each of these columns there is either a 1 or a blank/zero. I need to multiply that 7th number by the Quantity in column A, to achieve a total (ie the sum of each result of 7th cell*quantity) for each column in the bottom row, labeled "Totals".
In the actual version of my sheet, there are far too many rows to select everything manually. I've been fiddling with combinations of COUNTIF/COUNTA and OFFSET, but I haven't come up with a way to check for the 1 in every 7th row, THEN multiply that 1 by the quantity in column A, THEN add up the results for each column. As you can see, there are 1's elsewhere in the columns that are irrelevant to this particular calculation, so something like LOOKUP would also have to look in every 7th cell and couldn't just look at the column as a whole.
If you can't provide an immediate solution, but can at least point me to a resource that would allow me to devise a way to isolate every 7th row (THAT part is the sticking point), I'll surely post the solution to my own thread with updated keywords if I need it.
View 8 Replies
View Related
Jul 24, 2014
Looking for a formula to accomplish the following:
I'm trying to populate cell A31 on a worksheet titled "VolumeTotals" with the data in Cell E23 from a worksheet titled "CurrentCustomers" if the merged cells F3-F22 on worksheet "CurrentCustomers" are equal to the word "Contract".
View 6 Replies
View Related
May 29, 2014
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
View 14 Replies
View Related
May 28, 2009
I am looking for a code that will clear all of my unlocked cell in sheet 1. That is not a problem but since many of the cells are merged I know it keeps throwing me an error saying cannot change contents of merged cells or something like that. Does anyone know how to get around this without unmerging the cells. I saw a code to unmerge all of the cells on a sheet but I really don't want to do this as I already have worked around most of my problems with the merged cells.
View 14 Replies
View Related
Nov 13, 2008
I have a spradsheet that I've formatted using merged cells. The spreadsheet has several columns. Into these columns I must enter raw data extracted from our SAP data base. The extraction worksheet has no merged cells. So bottom line, I have a column of say, 30 non-merged cells and I want to paste that column into my formatted spreadsheet that has 30 merged cells of thre cells a piece (90 cells total).
So far I have been unable to do this. If I've attached it correctly, the sample attached
MERGE EXAMPLE.xls‎
View 7 Replies
View Related
Oct 21, 2013
Im having problems trying to sort through data and linking certain data. I will post example below:
Main 1
Main 2
Main
3
Sublevel 1-4
[Code]....
This is just one part of a row of the workbook but shows the Main data which is made up of 4 different sub levels on the right. I merged 4 cells for the main data so that all the cells lined up but I'm still having problems with being able to sort and link the files together so that when I filter, they all do it together. The example didn't paste well.
View 3 Replies
View Related
Feb 22, 2010
i have a problem to sort merged cells in the file attached. i tried via macro but could not reached a good solution. I have 30 plans inside the sheet and even manually is too hard to do it because i use some "=" to not type again every number since some are the same but when i try to sort the lines became diferent values.
View 10 Replies
View Related
Aug 12, 2009
I now see why alot of you dont like merged cell's. What i am trying to do is Cut and paste a range that contains merged cells. A kit can be created using the Button on the sheet. The cells in column G are merged down to the last kit item. On Row A of the kit the 1st cell contains data validation once the Delete kit cell is re-entered it removes the selected kit from the sheet. Then will select all kits below the (now deleated one) and cut the range, and paste it to where the old kit was located.
When the kit's are pasted into the new location there are issues with the merged cells in column G. Is there a way to fix this issue, or know of another approach to keeping the same layout.
View 5 Replies
View Related
Sep 17, 2007
I have merged cell C2:C9. When I insert formula =C5, it returns 0. How do I make it to return the actual value?
View 11 Replies
View Related
Feb 13, 2012
I have exported a report to Excel from a BI tool called ZAP.
Unfortunately the cells in the columns are merged by group eg. salesperson, product, country.
I need to be able to filter by each of the columns - the only way i can think of is to unmerge and copy the information to the rest of the "merge area".
This will be extremely time consuming as there are more than 1000 rows and at least 5 columns that I want to filter.
Sales PersonCountryCustomer NameProduct Model DetailJohn WUNITED KINGDOMAPCBasicPremiumStandardStAPLAccessoriesAcrylic FsPremiumFsStStyAPOAccessoriesPremiumStandardStAPMFsPremiumStandardSt
View 3 Replies
View Related
Oct 8, 2012
I have a spreadsheet that has merged cells on that is typed into.
I have a Macro that pulls the information into another sheet and then it tries to clear the cells for the next person to fill in. The issue I am having is that i cant clear the merged cell. I have tried the following code
Code:
Sheets("Coach").Select
Cells(18, 2) = ""
Range(Cells(18, 2), Cells(26, 11)).ClearContents
Sheets("Coach").Cells(18, 2).ClearContents
View 5 Replies
View Related
