VBA Code To Remove Larger Values Between Two Delimiters
Feb 27, 2014
I have a set of data in column A that looks like this:
White:0:0|Counter Height:0:0|Orange:40:0|Counter Height:40:0|Green:40:0|Counter Height:40:0|White:40:0|Bar Height:40:0|Orange:80:0|Bar Height:80:0|Green:80:0|Bar Height:80:0|
The delimiter "|" separates the unique values of an item (in this example they are dining stools of differing heights and colors), I need to only keep the lower value and remove the larger one.
The example above contains both White:0:0 and White:40:0 as two different values associated with the same dining stool. I need to only have White:0:0 remain and White:40:0 to go away.
View 2 Replies
ADVERTISEMENT
Nov 19, 2013
I am trying to consolidate an .835 raw text file that is full of receipts and payments into rows by specific values/characters. Once opened within notepad/text format, I figured out that the ~CLP is the referencing value/character used to break up each individual payment.
I need to somehow use the ~CLP as the value(s) to sort the text into new rows, with each row pre-leading with the ~CLP.
For example:
~CLP*442.24*DTM*B6*PR~CLP*124.32...etc
New Row format needed:
~CLP*442.24*DTM*B6*PR
~CLP*124.32
View 6 Replies
View Related
Oct 15, 2009
Having some trouble with the syntax to translate the content of a string. The string will always contain stock tickers, but the format varies. I need to normalize them into something like ticker(space)exchange code.
For example, cell 1 can contain:
ABC.EF US - I need to remove the .EF so I'm left with ABC US
ABCDEF.GH TT - I need to remove the .GH so I'm left with ABCDEF TT
The length of the part preceeding the "." will vary, as will the last two characters (the exchange code). I expect that there will always be two characters immediately after the "." which are to be removed.
View 3 Replies
View Related
Sep 21, 2009
I have a sheet that is going to list usernames in a range of cells (e13:e19). Who gets listed there depends on another condition. So, all the cells could have a name, or only a couple of them could have a name. In another cell I have a formula that is to concatenate the results of who is in e13:e19 range, each name to have a comma between. The problem results when not all of the cells have a name .. the commas still appear ... so results could be ted, mary, bill,,,,bob, jeff ..etc.
I am using the formula below but it still allows the non-needed commas to appear:
=MID(IF(ISTEXT(E13),","&E13,"") & IF(ISTEXT(E14),","&E14,"") & IF(ISTEXT(E15),","&E15,"") & IF(ISTEXT(E16),","&E16,"") & IF(ISTEXT(E17),","&E17,"") & IF(ISTEXT(E18),","&E18,"") & IF(ISTEXT(E19),","&E19,""),2,2000)
View 3 Replies
View Related
Sep 21, 2009
It was being able to concatenate a list of names with commas between names. The resolution was: =Substitute(Trim(E13&" "&E14&" "&E15&" "&E16&" "&E17&" "&E18&" "&E19)," ",",")
This worked great until my boss said "I want first and last names. Now someone whose name makes the list is shown as john, smith.
View 5 Replies
View Related
May 1, 2008
I'm trying to split a cell with 2 different delimiters.
As example
A1 10'48"
to
B1 10
C1 48
I have about 10.000 entries like those. And i think a macro should be the most suitable for it.
But I'm not experienced enough to make it work.
View 3 Replies
View Related
Jan 14, 2014
I'm trying to write code to join two columns of data, and then join all of those into one cell.CA
California
DE
Delaware
CT
Connecticut
I want to be able to run the macro and have it put {"CA":"California","DE":"Delaware","CT":"Connecticut"} into cell C1.
I was thinking that this would have to be a two part macro. First, it would take each specific row and join CA and California and add the colon, quotation marks, and the comma, and put it Column C. Then, after it's gone through every row, it would join every cell in column C together.
This is what I've written so far:
VB:
Sub test1()
Dim r As Range
Dim lr As Integer
[Code]....
Now I need to figure out the second part. How do I then take all of the join cells in column C and join them together, adding the curly braces at the beginning and the end, and removing the comma from the very last row?
View 4 Replies
View Related
Sep 29, 2009
I need to import a number of log files into a spreadsheet, each log will go into a separate tab. The logs are text files (.log) that have the same structure but slightly differ from each other.
For example all the logs will have many lines of data all starting with a date and then a number of delimited fields. In some logs the delimiter is a coma, in others is a unique charachter such as "{" or "@". Also the delimited fields are not a given quantity, they can vary too from log to log. How can I write a macro that understands what delimiter needs to be used and then imports all the file accordingly into one spreadsheet (in separate tabs)?
I tried something with the macro recorder and browsed for directions on the internet but really am clueless on this one. I am using windows 2000, and referenced Windows Scripting Runtime.
View 3 Replies
View Related
Oct 3, 2011
Having some problems splitting data within a single column into several using VBA rather than a Formula. (I have been able to get working using a formula). I have found a few similar theads but nothing i seem to be able to convert with my some what limited skills
My data is always in a sheet called "Release Data" in column A, the number of rows varies daily. The data is always extracted with the delimiters in the same position E.G.
NNNNNN_AAA_Variable length txt
I would like to split the data into columns I, J and K.
View 2 Replies
View Related
Jan 9, 2008
I have a spreadsheet which performs certain operations as long as I insert 3 values in 3 cells. The results for different scenarios are shown within the same sheet. excample:
I insert
3,52,051,22
then many calculations are performed automatically and the result are shown in other cells in the same sheet.
My goal is to be able to copy/paste ca 8-10 strings of information at the same time. All of them at the same time, instead of only one at the time. Also, there will be a textstring and some digits I don’t need along with the copy/pasted info.Ex:
Name Time Date X1 X2 X3
Lou 22.11 01.03.2006 3,5 2,05 9,72
Lie 12.01 01.03.2006 2,5 2,65 1,22
Tom 17.09 01.03.2006 4,5 8,09 3,28
etc.....................................
View 2 Replies
View Related
Apr 17, 2008
I have a column full of text with most data separated by commas, except sometimes between the commas there is a string, marked by ' ' , which itself contains commas.
For example: 45,'im a string, look at me',67,43,5,'im another string, look at me',78
I try to make excel put all the data into columns, so 'im a string, look at me' will have its own column, instead of being split into two columns. I tried telling excel that the ' character marks strings, but it just removed the apostrophes and kept splitting any string that contained a comma. I tried to use a special delimiter,' but excel didn't allow me to. Does someone have a macro that will do the text to columns for me, or is this possible to do with the regular text to columns feature of excel?
View 2 Replies
View Related
Aug 6, 2012
I need to "convert" Excel table to TXT or CSV file, but delimiters have to be ";" and text must be in quotation marks "".
View 1 Replies
View Related
Apr 8, 2013
I have a column within a spreadsheet that has data separated by 2 delimiters, a "" and a "/". (This data has been extracted from a linux-based file.)
For example: "1100789/3200899/6xlm-sgt-455-0987"
The items of data are from a bill of material (parts explosion) and the number preceding the "" is a quantity and the numbers preceding the "/" is a sub-part number of the main part number that is entered into a column to the left of this data string. (unseen in the example)
I need to take this string of numbers and place the quantity in one column, the part number in another column, then add a row and continue to populate each column until the data has all been separated, then move on to the next main part number row to continue the process.
for example:
1 100789
3 200899
6 xlm-sgt-455-0987
Is this possible with the data tools in a spreadsheet, or will I need to write a macro?
View 9 Replies
View Related
Jan 30, 2014
I would like to extract multiple numbers from a single cell. The cells contain -, /, and blank spaces are delimiters. An example is 4 - 3 1/4 and because of the way they use that number, it really means 4 inches and 3.25 fifths of an inch (3.25/5 inches) which is weird. I want to go through each cell and store the 4, 3, and 1/4 as variables so I can then manipulate to convert them to the proper inch value (I can perform the conversion code, I just need to know how to set those variables in the cell). And I would like it to automatically do it when a cell has been changed. formatting to maintain overall table width dimensions so if you know anything about that,
both cells are blank
4 - 3 1/4
cell value is enter in on the left
4 - 3 1/4
4.65
converted cell value appears on the left
View 2 Replies
View Related
Sep 10, 2008
I have a spreadsheet with two modules. In an effort to reduce the file size of an archive, I’d like to remove some of the code (i.e., Module1). I have a macro that attempts to do this.
There are three parts to the operation. The first removes Module1; the second Quits the application; the third saves the changes. If I run each of these operations separately, it works fine. However, I’d like to do this with only one macro (SKK4). For some reason, it does not remove the Module.
Here is my test
Sub skk1()
ThisWorkbook.VBProject.VBComponents.Remove_
ThisWorkbook.VBProject.VBComponents("Module1")
End Sub
Sub skk2()
Application.Quit
End Sub
Sub skk3()
ThisWorkbook.Close SaveChanges:=True
End Sub
Sub skk4()
skk1
skk2
skk3
End Sub
View 9 Replies
View Related
May 14, 2006
Private Sub Dupe_Remover()
'29/06/2005 by nhunter
Application. ScreenUpdating = False
Dim R1 As Range
Dim drow As Integer
Dim lastitem As String
Set R1 = ActiveCell
loopst:
If Trim(ActiveCell) = "" Then
Goto procend
End If............
View 9 Replies
View Related
Sep 18, 2006
I have a VBA sub "Create Invoice". After I run it, I would like to remove it, using a CleanUp sub.
Is it a good assumption that a VBA routine is simply an object like any other object?
If so, what is the VBA code to remove a sub?
Does it matter whether the sub is a free standing module, or a sub that is attached to a worksheet?
View 6 Replies
View Related
Jun 24, 2007
I have developed a series of spreadhseets in which I use a macro to derive and insert the data from a SQL Server db. These spreadsheets may have one or more worksheets, some of which start as blank "canvases", others are preformatted with static data.
They are used for client reporting so are heavily formatted and include graphs; some manual preformatting, some coded, some graphs drawn completely by the code, some already in place - I just populate the data source. The VBA for the most complex one extends to around 5-6000 lines of code.
While this code does not add a huge amount to the footprint of the files, I feel that it is inappropriate for the spreadsheets to be distributed to the end clients with all this code included. The code is password "protected" but we all know how effective that can be although that is not really the point anyway - I simply feel it would be more professional if the code were not there at all.
There doesn't seem to be any options on a "Save As" method which enable the resulting sheets to be saved without the macros. I have tried recording a macro in which all I did was to delete the macros concerned - nothing was recorded. So a macro to remove macros seems to be out of the question.
These spreadsheets are held in a master folder on a server and are set as "read only". The users start the a sheet, run the macro (via a menu item which displays a selection form) and then save the resulting spreadsheet as another file in another location. I am wondering if there is some way I can cut into this process and develop my own "save" routine.
View 4 Replies
View Related
Sep 18, 2007
I am using the following code to select rows in a filter.
Selection.AutoFilter Field:=Worksheets(" Dashboard"). Range("G1"), Criteria1:=Worksheets("Dashboard").Range("H1")
This code runs when I click a command button on a userform.
When I load the userform up again I want to clear off the previous filter before I filter again as there are 4 columns which have filters on.
I have tried using ActiveSheet.ShowAllData before filtering again but this code falls over if there isn't a filter already on.
View 4 Replies
View Related
Apr 10, 2014
I have a set of text in rows which includes duplicates like this:
Column A
Text 1
Text2
Text1
Text500
Text500
I then need to remove the duplicates and put them in column B. I normally use the remove duplicates button in Excel to do this but seeing as I have to do this task every day, I was hoping there would be either a formula or VBA solution which automatically does this?
View 4 Replies
View Related
Mar 23, 2014
I have the need to remove an ellipsis from an active cell within a spreadsheet. These are inserted manually by agents in a call centre. However when this information is migrated onto another system, any ellipses cause the second system to crash. (I don't know the reason behind this).
I have been asked to look at the possibility of removing these using code. I currently have a macro running to remove any punctuation and do spell check on a command button for the active cell and was wondering what the code would be to add to this macro. I am using the replace command to find "." etc and replace with " ".
View 6 Replies
View Related
Sep 2, 2009
Is there code available that will hide the Tools Menu within excel?
View 5 Replies
View Related
Apr 12, 2012
I am trying to create code that I can use to to update a macro module automatically so I don;t have to keep having my users manually import when we have update to the module.
Here is the code I have so far.
Private Sub Workbook_Open()
Call UpdateTJMacros
'This is in the module we are replacing
Call MyOpenWorkbookMacro
[Code] ...........
View 3 Replies
View Related
Dec 15, 2012
share a code to remove BLANK ROWS.
I have data on ROW#1, #5, #10...etc,etc.. I want to remove rows in btwn (which is blank) Instead of doing manually
View 2 Replies
View Related
Jan 26, 2007
I have built a tool that automates the creation of some excel models. When each one of these models is created and deployed I need it to have all VBA code removed from it.
What vba command can I run that will strip all vba code out of a chosen workbook?
View 9 Replies
View Related
Aug 20, 2014
I have a list of addresses, which are comma separated, all ending with a PostCode
How Can i strip out the PostCode field?
View 3 Replies
View Related
Apr 2, 2009
What I’m after is the macro code to remove all the Hyperlinks from the data in the cells in a worksheet.
View 2 Replies
View Related
Feb 6, 2014
I have a spreadsheet which was formatted from VB code. Within the sheet there are four date columns where some dates show as 00/01/1900 (due to them having '0' in at the time of running the code). I am trying to run some code to blank out all cells showing the 00/01/1900 date, but the code just isn't touching it. I reverted to simply recording the 'find and replace' function and inserting into my code, but those irritating dates still remain.
Code I have used is as follows:
[Code] .....
View 4 Replies
View Related
Feb 5, 2014
I have a file that I want a code to look for certain data and when found move the row to another sheet. The code needs to look at the active sheet because the name of the sheet will be different everytime I use it. It will also need to create another sheet named 'Online' that these rows are moved to.
The code will need to look for data that begins with either OAP, MCP, CPP, F4P, VAP, VWP, ITP and MEP. These will be followed by numbers i.e MCP123456. Once these are found I need the entire row removed to the created sheet.
The columns that these numbers will be in will vary on each file I use it on so it needs to look at the entire sheet rather than specific columns.
Also any cell that has data that begins with either MH and JD followed by 6 numbers that row needs deleting completely.
View 9 Replies
View Related
Mar 22, 2007
I have a macro which opens one excel file, then copies the data into another, dead easy. However the first file is 'downloaded' from a bespoke package, where (for whatever reason) the package appends a number of spaces (" ") after data in one of the columns,
So sometimes the data will contain one, ten or more extra spaces (no telling how many) ie, it could look like "AB ", "AB ", or "AB " etc
Ideally What i need is a small bit of code that once the data has been imported to my sheet it can run and 'strip' extra spaces from the column, lets say column f, to leave all the data in this column to look like:
"AB"
"AF"
"CD1"
"VFE"
I am drawing a blank, any simple lines of code?
View 9 Replies
View Related
