I have a sheet that is going to list usernames in a range of cells (e13:e19). Who gets listed there depends on another condition. So, all the cells could have a name, or only a couple of them could have a name. In another cell I have a formula that is to concatenate the results of who is in e13:e19 range, each name to have a comma between. The problem results when not all of the cells have a name .. the commas still appear ... so results could be ted, mary, bill,,,,bob, jeff ..etc.
I am using the formula below but it still allows the non-needed commas to appear:
=MID(IF(ISTEXT(E13),","&E13,"") & IF(ISTEXT(E14),","&E14,"") & IF(ISTEXT(E15),","&E15,"") & IF(ISTEXT(E16),","&E16,"") & IF(ISTEXT(E17),","&E17,"") & IF(ISTEXT(E18),","&E18,"") & IF(ISTEXT(E19),","&E19,""),2,2000)
It was being able to concatenate a list of names with commas between names. The resolution was: =Substitute(Trim(E13&" "&E14&" "&E15&" "&E16&" "&E17&" "&E18&" "&E19)," ",",")
This worked great until my boss said "I want first and last names. Now someone whose name makes the list is shown as john, smith.
I'm trying to write code to join two columns of data, and then join all of those into one cell.CA
California
DE Delaware
CT Connecticut
I want to be able to run the macro and have it put {"CA":"California","DE":"Delaware","CT":"Connecticut"} into cell C1.
I was thinking that this would have to be a two part macro. First, it would take each specific row and join CA and California and add the colon, quotation marks, and the comma, and put it Column C. Then, after it's gone through every row, it would join every cell in column C together.
This is what I've written so far:
VB: Sub test1() Dim r As Range Dim lr As Integer
[Code]....
Now I need to figure out the second part. How do I then take all of the join cells in column C and join them together, adding the curly braces at the beginning and the end, and removing the comma from the very last row?
I need to import a number of log files into a spreadsheet, each log will go into a separate tab. The logs are text files (.log) that have the same structure but slightly differ from each other.
For example all the logs will have many lines of data all starting with a date and then a number of delimited fields. In some logs the delimiter is a coma, in others is a unique charachter such as "{" or "@". Also the delimited fields are not a given quantity, they can vary too from log to log. How can I write a macro that understands what delimiter needs to be used and then imports all the file accordingly into one spreadsheet (in separate tabs)?
I tried something with the macro recorder and browsed for directions on the internet but really am clueless on this one. I am using windows 2000, and referenced Windows Scripting Runtime.
Having some problems splitting data within a single column into several using VBA rather than a Formula. (I have been able to get working using a formula). I have found a few similar theads but nothing i seem to be able to convert with my some what limited skills
My data is always in a sheet called "Release Data" in column A, the number of rows varies daily. The data is always extracted with the delimiters in the same position E.G.
NNNNNN_AAA_Variable length txt
I would like to split the data into columns I, J and K.
I have a spreadsheet which performs certain operations as long as I insert 3 values in 3 cells. The results for different scenarios are shown within the same sheet. excample:
I insert 3,52,051,22 then many calculations are performed automatically and the result are shown in other cells in the same sheet.
My goal is to be able to copy/paste ca 8-10 strings of information at the same time. All of them at the same time, instead of only one at the time. Also, there will be a textstring and some digits I don’t need along with the copy/pasted info.Ex:
Name Time Date X1 X2 X3 Lou 22.11 01.03.2006 3,5 2,05 9,72 Lie 12.01 01.03.2006 2,5 2,65 1,22 Tom 17.09 01.03.2006 4,5 8,09 3,28 etc.....................................
I have a column full of text with most data separated by commas, except sometimes between the commas there is a string, marked by ' ' , which itself contains commas.
For example: 45,'im a string, look at me',67,43,5,'im another string, look at me',78
I try to make excel put all the data into columns, so 'im a string, look at me' will have its own column, instead of being split into two columns. I tried telling excel that the ' character marks strings, but it just removed the apostrophes and kept splitting any string that contained a comma. I tried to use a special delimiter,' but excel didn't allow me to. Does someone have a macro that will do the text to columns for me, or is this possible to do with the regular text to columns feature of excel?
The delimiter "|" separates the unique values of an item (in this example they are dining stools of differing heights and colors), I need to only keep the lower value and remove the larger one.
The example above contains both White:0:0 and White:40:0 as two different values associated with the same dining stool. I need to only have White:0:0 remain and White:40:0 to go away.
I am trying to consolidate an .835 raw text file that is full of receipts and payments into rows by specific values/characters. Once opened within notepad/text format, I figured out that the ~CLP is the referencing value/character used to break up each individual payment.
I need to somehow use the ~CLP as the value(s) to sort the text into new rows, with each row pre-leading with the ~CLP.
I have a column within a spreadsheet that has data separated by 2 delimiters, a "" and a "/". (This data has been extracted from a linux-based file.)
For example: "1100789/3200899/6xlm-sgt-455-0987"
The items of data are from a bill of material (parts explosion) and the number preceding the "" is a quantity and the numbers preceding the "/" is a sub-part number of the main part number that is entered into a column to the left of this data string. (unseen in the example)
I need to take this string of numbers and place the quantity in one column, the part number in another column, then add a row and continue to populate each column until the data has all been separated, then move on to the next main part number row to continue the process.
for example: 1 100789 3 200899 6 xlm-sgt-455-0987
Is this possible with the data tools in a spreadsheet, or will I need to write a macro?
I would like to extract multiple numbers from a single cell. The cells contain -, /, and blank spaces are delimiters. An example is 4 - 3 1/4 and because of the way they use that number, it really means 4 inches and 3.25 fifths of an inch (3.25/5 inches) which is weird. I want to go through each cell and store the 4, 3, and 1/4 as variables so I can then manipulate to convert them to the proper inch value (I can perform the conversion code, I just need to know how to set those variables in the cell). And I would like it to automatically do it when a cell has been changed. formatting to maintain overall table width dimensions so if you know anything about that,
both cells are blank
4 - 3 1/4
cell value is enter in on the left
4 - 3 1/4 4.65 converted cell value appears on the left
I have more than 30 Columns. I want to concatenate all these columns and put the value in one cell. When I do it, Exccel gives me an error, "You have entered too many arguments for this function"
This is the concatenation macro I have for 2 columns. I want to make this more general in that I would like the program to insert a new column to the right and concatenate the 2 columns based on the current cell the cursor is on and the one adjacent to the left (-1). The loop works fine, the modification I need is for the following three (3) lines.
I have a list of about 1,500 email addresses. To send an email I need to have a comma between each entry. I know I can use the formula =(A1&,",",&A2) to concatenate cells A1 and 2, with a comma between the 2 strings, but is there a formula to automatication do it for A1 - A1500???
Or is there an entirely different approach I should consider?
I've got a spreadsheet that is being somewhat auto-generated from another program that extracts four different lines of text and puts them into separate cells (Starting at W30, X30, Y30 AND Z30). I believe there are 15 possible combinations. What I would like to end up with is each cell concatenated with " - " separating each one, but ONLY if there is text there to separate.
The function code I have so far gets me very close to what I want, but there are a couple of small issues remaining. See Red Bolded Text. Here's what I've got so far.
I need to combine data from two adjacent columns into one in a condensed version of a spreadsheet. As the spreadsheet itself is quite big (over 20,000 rows) I was wondering if there was a quick and efficient way to doing this.
Here is a sample of what I'm working on (I know this would be better off as an image but unfortunately Photobucket is blocked at work):
I'm trying to create a model for woodworking where I can enter fractional wood sizes and have Excel create panel sizes and board lengths for cabinetry. I can easily get the inputs formatted in fractions, but then I'd like to have a concatenation formula that joins two fractions and displays a panel size as a fraction. However, when I try to do this, the concatenation formula changes the fractions to decimals.
Example: cell A1 is 3/4" formatted as fraction. Cell A2 is 1 1/2" formatted as fraction. Let's say I want a to concatenate so that A3 reads
3/4 x 1 1/2
But when I use concatenate (A1," x ",A2) the answer in A3 reads
I have 1 work book with 2 work sheets. I need the data from 1 cell on the first sheet to be merged with a cell on the second sheet, ( I could also do with this having a line being inserted) can this be done in the same cell or does the merge command only work into a new cell?
my problem is that i have a huge number of rows and columns, what i want is to concatenate the data in all the columns to the data in the first one, but separately, this is really complicated, so let us assume that i have the following table
also we need to take in consideration the empty cells as they must be skipped during the process, also find attached my Excel sheet that needs the modification
I have approx 1000 rows in my spreadsheet. Each row contains one column which is a number. What I would like to do is list all these numbers side by side with only a comma seperating them. Just say the first 3 rows have the following numbers 10003, 10056, 100039. I would like to get the numbers to appear in one cell like this: 10003,10056,100039.
Say I wanted to concatenate a row that had 10,000 values in it. How could this be achieved without having to click 10,000 cells while typing a comma in between each one?
I have a column of numbers going down the sheet in column A.
I need to concatenate all the numbers in each cell in the column and separate each by a comma. This would then be displayed as a long list all in cell B1.
