VBA - Comparing Cell Below To Above And Inserting Row
Dec 27, 2013
I am currently using excel 13' and am having trouble inserting rows once the value in column b changes. My goal with this procedure is to insert two rows after each change in value in Column b (i.e. b2, b3, and b4, all equal 123 however b5 equals 124) Below is the code.
Dim cell As Range
Set i = Range(Range("A1:I1"), Range("A1:I1").End(xlDown))
Set bsort = Range(Range("B1"), Range("B1").End(xlDown))
Set ISort = Range(Range("I1"), Range("I1").End(xlDown))
[Code]....
'Need to Identify which cells are not equal to the one above in column B (bsort = range)
For Each cell In bsort
If cell.Value cell.Value - 1 Then
ActiveWorkbook.ActiveSheet.EntireRow.Insert
ActiveWorkbook.ActiveSheet.EntireRow.Insert
End If
Next cell
End Sub
1 worksheet I have a value and I need next to it the result i take from other worksheet.
LETTERS AMOUNT A Result C Result G Result
[Code]...
The list goes on.
So Pretty much I need to compare the value "LETTERS" on the first worksheet with the array of letters from second worksheet and insert in the field of the Result, the value next to the correct find in the array of letters ...
I am working on formatting a spreadsheet report where the values will change in column A. Here is what I would like to do via a Macro. Compare the cells in column A (e.g., compare A2 to A3, compare A3 to A4, and so on). If the values between the two cells in column A are different, insert three blank rows and set the active cell to the next cell following the blank lines. Example:
if cell A5 is different from A6, insert three blank rows below row 5 and new active cell is now A9 and the comparison would start again. I have been trying to code the macro for this but with no success. Here is the macro I have been working on.
Sub Macro1() Const NumRow As Integer = 3 Dim StartCell As Range Dim RowNR, NewCnt As Long Dim RowCount As Long Dim Count As Long Dim intRow As Integer Dim bFmtComplete As Boolean RowCount = Application.WorksheetFunction.CountA _ (Range("A1", Range("A" & Rows.Count).End(xlUp))) bFmtComplete = False RowNR = 2 Range("A1:J1").Select ' Rows("1:1").Select Selection.Copy................
Excel 2010. I need to place picture into one cell or one big merged cell, as a background fill. picture must resize to size of cell. must be fixed in, not in front. i still need write into that cell, so it needs to be really background.
I have the names of companies in one column, and the amount they owe in cells in the column beside them. I then have a second list of companies that is a subset of the first. Is there a formula that would place the amount they owe in teh corresponding cell adjacent to the compny in the second list? I've attached a sample workbook, Full Company List in column A, amount owing in B, trimmed down list in D and ideally I'd like the corresponding values in E.
I have a football score system and wish to compare the values of various cells - 2 if possible, but more if not possible.
Essentially I have a list of predictions for the score of a game (e.g. 2-1, 1-0, 0-0, 2-2 etc) in a spreadsheet, and I have a cell where I enter the correct scoreline (e.g. 2-1). The way the points system works is that if the prediction is correct (i.e. 2-1) then that player gets 3 points. If the result/outcome is correct but the scoreline is incorrect (i.e. 1-0) then the player gets 1 point. If they result/outcome and scoreline are incorrect, then that player gets 0 points.
Ideally I would link to compare 2 cells - predicted score and actual score, where the format of the scores is entered as 2-1.
However, I feel this may be easier having to columns for the score - Column A = 2 Column B = 1. In this way the scores only need to be compared cell by cell, however they would need to be compared by value for the correct outcomes.
To make a long story short, I'm trying to compare formulas. I was able to copy the formulas as values.
There are hundreds of lines, each one with the formulas pasted as values, like '=SUM(G132:I132) / G30. What I want right now is to compare the text.
So, if for example:
the line for both parts of the pasted sum formula like '=SUM(G132:I132) / G30, I want a number 1 to be written in the adjacent cell (if '=SUM(G132:I132) / G30 is in A1, 1 should be written in B1).
However, if its is written '=SUM(G132:I142) / G30, than nothing should be written in B1.
Moreove, the line could have from 1 to characters. So it could be '=SUM(G1:I1) / G30 or '=SUM(G13200:I13200) / G30.
is the same, like of A1 is '=SUM(G1322), I want a number 1 to be written in B1
I want to be able to count how many instances Primary Price is >= Price 2. And, secondarily how many times Price 1 was, at a minimum, >= to Price 2 and then also >= Price Price 3.
Ultimately I want to compare Primary to 100 or so "Prices" over a years time
I figure it would be a sumproduct function, but can't get it dialed in
I have a list of names and a seperate list of names with emails.
In column A there is a last name, column B a first name, and then for the second list in column D there is an email.
I need to tell Excel that if column A and Column B both have a replication on the list, then in Column D populate it with the email address on the list.
I know this is confusing so I have attached a sample of my spreadsheet. The email address is in yellow and I need to have it copied to the cells in white. The list is almost 14,500 lines long and it would take forever manually.
I have a cell (F2) that is auto updated with total sales units for today (Its a simple counter of individual sales). I want to detect when there is a "batch" of sales >= 10. ie. F2 may start at zero for the day and increment by 1,2,5 or 10 units at a time. If the increment is 10 units or more I would like to detect this and store the result in cell G4.
Typical values in C2: 0, 1, 6, 7, 9, 19, 21, 22 etc as new orders arrive. The larger order between 9-19 (viz 10 or more), I need to detect and store in G4. I know that I need to use both the current value of F2 (say 19) and the previous value of F2 (say 9) to perform this, but the solution eludes me.
If Cells(3, k).Value = "Actuals" Then DesActualColumn = Cells(3, k).Column End If nice and simple, and works fine until it cannot find "Actuals" in the cell because someone has put a tab ahead of it, for example. Can anyone tell me how I can use a 'LIKE' and put wildcards
I am aware this question must have been asked to death on this forum and I already searched and found some answers but for some reason I canīt get it to work. I have two worksheets (sheet1 and sheet2). In Column E of Sheet1 I have product descriptions that I want to compare cell by cell to the product descriptions in Column F of Sheet 2. If they are not the same, color in the cell in Sheet 2. There are 1810 rows in both columns. I tried this method but it gives me an error (in spanish) that says that I cannot compare ranges of data.
I have also seen some code to do something similar (http://www.ozgrid.com/forum/showpost...85&postcount=3 ):
Sub find_cell() Range("A:E"). Find(What:=Cells(2, 6).Value, LookAt:=xlPart).Activate ar = ActiveCell.Row ac = ActiveCell.Column ' the two lines above store the row and column values of the cell found ' in your example ar is going to be equal to 229 and ac is 3 ' now this following lines are to change the colors to red With Cells(ar, ac).Interior .ColorIndex = 3 .Pattern = xlSolid End With End Sub
I donīt quite get the "Range("A:E").Find(What:=Cells(2, 6).Value, LookAt:=xlPart).Activate" part though.
Here is the qtn if two cells A1 and A2 has "ab 1" and "ab 2" the answers for comparing cells should be true as both cells has first 2 letters as alphabets then space followed by numeric..format of cells is same.
I'm trying to compare the values of columns B and G and if any of the cells are G < B, I would like to move the whole row into the second worksheet. And only if possible, it would be awesome if the macro could check column A for duplicates before the value comparison and sum up the column B if there are duplicates. In my example row 6 and 7 on column A have the same suppliers code and the amount totals to 2.
In this case for example, the value of the third row of G is lower than B, and therefore I would like the whole row 3 to be cut out from worksheet 1 and moved to worksheet 2.
Original view of sheet 1: SUPPLIERSCODE ORDERAMOUNT PRODUCTNAME BARCODE
I have two images that have a name on each sheet for reference. One is a thumbs up image, one is a thumbs down. They are both named tu_image and td_image respectively. I want to show the thumbs up image if a particular cell has a value of 10 and show the thumbs down image if that cell's value is < 10.
This check and display needs to be done about 20 times on different sheets and with different values. (i.e. Thumbs down should only show when the value is < 20, instead of 10.) Ideally this should take place when the workbook updates with new data. Is this possible?
I have a simple formula, =IF(A1=0,"",A1) to replace 0 with blank. However ISBLANK doesn't recognize the result as blank, because it's really testing for an empty / unused cell rather than a blank one.
Is there something I can replace the "" with so that ISBLANK returns true?
Is there a way to insert a pdf into a cell comment? I found how to insert an object but when I do that it covers the entire spreadsheet. I would like to be able to add pdf's to cell comments.
I'm trying to insert a formula into cell "A8" when cell "A1" changes. These formula gives me (into cell "A8") the next week day, depending on the value of cell "A1". If A1="FRIDAY", "A8" will be 08-11-2013.
The problem is that an error ocurred (Run-time error '1004'). If I put the formula directly into cell it works...
Code: Private Sub Worksheet_Change(ByVal Target As Range) If Target = Range("A1") Then ActiveWorkbook.Worksheets("Sheet1").Range("A8").Formula = "=TODAY()+8-WEEKDAY(TODAY()-MATCH(A1;{""MONDAY"";""TUESDAY"";""WEDNESDAY"";""THURSDAY"";""FRIDAY""};0))" End If End Sub
I am looking for a way to insert a picture into a cell BUT the picture should not float. It should change its size whenever the cells size changes - as if it was inserted into a rectangle drawn from the "PAINT" Bar. An example (but it floats) can be seen in the attached picture/
I want to select any cell on a spreadsheet, then run a macro that inserts a comment to the selected cell with the inserted comment text being the selected cell entry (value/text/ date). Primarily to insert a cell date value to comment before overwriting it with a tick to represent completion. The comment then contains the date for archive info purpose.
I have the need within a spreadsheet to automatically compare the value of 2 cells and if they match exactly to move the cursor to a group of cells. If they do not match then move to another group of cells. The only way that I can see to do this is via Macros. However I still need to do the automatic compare first.
The following code sends the open workbook, as an attachment, to a predefined email address. It then inserts the date it was sent in a cell in another workbook. It works ok in three other modues going to different addresses, it works ok on other networked PCs. Unfortunately on one PC we get the error "Can't Find Project or Library". Initially this pointed to an undeclared variable, when this was declared, it pointed to another. All variables have now been declared but it fails and points to the DATE command".
VB: Sub To_Design() '' '======================================================================================================= 'This emails the current open file, which is named after the Log Number, to the Originator of the Doc 34.It opens up 'the Doc 34 Log and enters the date that it was sent in Column L. The email addressee has to be manually added as it 'could have been originated from anywhere in the company. '=======================================================================================================
-I have two sets of data in two different sheets. The data is similar, but it is taken in two ferent times, so there are some cells, which content has changed.
-I want to make a macro that identifies the changes in the latter (newer) sheet compared two the older one and to:
a) Highlight the cells (this works)
b) Add a comment to each cell that has changed so that the content of the comment is the content of the "older" cell. (so that one can easily see from the newer sheet that highlighted cells have new values and the old values are in the comment) (this is not working)
Here's my code so far. Like I said I can't make the comment work. I tried it with the same text in all comments ("test comment") and it worked but I can't make it to go and get the data from my older sheet.
OLDER = my sheet with old data NEWER = my sheet with updated data NEWTABLE = my table on the NEWER sheet where I want to check the changes
I'm using excel 2003 and was wondering if I could insert html around the cell data in a faster way than cutting and pasting it. Here is an example of a column and what I would like to do.
aaaa bbbb cccc dddd
Now I would like every cell to have HTML around it to be easily posted on a website. I would like the cells to now look like this.
