I have the following snippet of
If Cells(3, k).Value = "Actuals" Then
DesActualColumn = Cells(3, k).Column
End If
nice and simple, and works fine until it cannot find "Actuals" in the cell because someone has put a tab ahead of it, for example.
Can anyone tell me how I can use a 'LIKE' and put wildcards
I am new to VBA and am having difficulties in getting a find function to successfully locate search criteria within cell. When the search criteria matches exactly that of the cell contents then the code works; however should the search criteria only form part of the total cell contents (such as a seach for "the" in a cell containing "the cat sat on the mat") the code doesn't recognise it.
Essentially, I need the code to search a range for the required string and if found within a cell activate that cell and populate a combobox with the full cell contents of the activecell.offset(0,-2).
The relevant section of code attached below:
Dim role_count as range
Dim role as string
If Application.WorksheetFunction.CountIf(Range("Role_Count"), Role) 0 Then
Range("role_count").Select
Selection.Find(What:=Role, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
Me.Controls(ComboBoxName) = ActiveCell.Offset(0, -2).Value
way I can check workbooks, and compare it to make sure they have the same exact data. What I would like to do ---
-I have 76 workbooks, and in each workbooks I have 12 worksheets
-I would like to compare, Table01_cue.xls to Table01_Master.xls to make sure that A1:N76 (sheet Jan) in Table01_cue.xls match with A1:N76 (sheet Jan) in Table01_Master.xls, The range in each worksheets changes … for sheets Feb it is range from A1:O76… is there a way to check this?
And if the data doesn’t match up I would like it to tell me where it doesn’t match up…
I have attached a workbook stating my problem.
file1.xlsx‎
I thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.
View 3 Replies View RelatedHave a column of cells (521 rows), on the column each cell contains a group of number
Example:
27, 539, 484, 485, 506, 594, 523, 502, 505, 525, 541, 526, 527, 529, 542, 533
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 530
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 533
Let's say I would like replace 27 to 163 but when I find and replay the "527" also changed to 5163. How can i filtered out 527 and just change the 27. I tried Match Entire Cell Content, it doesn't work.
What command do I enter so that a value in one cell is copied EXACTLY to another cell? For example, I have today's date in cell A4 and I want the exact date to be automatically copied to cell E5.
I can't seem to figure out the correct function to do this. I looked for help but there are just ways to transfer formulas over to other cells.
All those tabs have same format. Anyone know if there's a quicker way to do it? Each tab has different names. Thanks for your help.
View 9 Replies View RelatedFor example Cell A1 is 9.5 x 2.5 which gives 23.75
but what is actually displayed to users is rounded to 24
So how do I use 24 as a reference instead of 23.75?
So in Cell B1, it would be =A1x100 but the value is 2400 instead of 2375?
You can't use the ROUND function because if users decide to use 23.8 then the B1 cell needs to be 23.8x100
I'm trying to find an exact match to a cell and not xlPart of it, but not sure what the syntax is, (Always where can I find a list of the properties?
Code:
Set Ran2 = Worksheets("TicketsList").Range("B8:IV200").Find(Count, lookat:=xlPart)
If Not Ran2 Is Nothing Then
CallRow = Ran.Row
CallCol = Ran.Column
End If
MsgBox "Row is " & CallRow & "Column " & CallCol
I have a spreadsheet that evaluates cells against eachother and if they don't match I either delete the whole row, or delete up. When I do this, I have to redo the formula as I get an error.
So I start with: =EXACT(A1,G1).... and once I delete a row or delete "up", I get =EXACT(#REF!,$G3).
I have tried =EXACT(INDIRECT(A1,G1)), =EXACT(INDIRECT($A1,$G1)), and also =EXACT($A1,$G1).
None of these work.
I am using the form control data validation drop down list with 9 entries in the list. How can I get the entry that is selected in the drop down list to populate exactly into another cell on a separte worksheet? I have linked the drop down list to the cell, but the value is populating as a number rather than the text entry that is in the drop down.
View 7 Replies View RelatedI have the following formula in a cell that gives me a sum of items matching certain criteria.
View 3 Replies View RelatedI need to search for an exact match within a cell & i am unsure of how to go abt it. Eg ) Cell A1 contains "Emea West,Emea East,Emea". I want to search for the term "Emea" in the contents of the Cell A1. I cant use Find() as using "=FIND("Emea",A6)" returns 1 ... But i want an exact match i.e "Emea" only which in this case should be 21. The Exact() works well if Cell A1 had a single value ...I guess I would need to use some array function here which will parse through contents of the cell , but am not sure on how to go about
View 5 Replies View RelatedI am having a product style code in Column A2:A301 from 1 to 300, and I want get picture in next cell ie column B2:B301 based on cell value A2 from a selected folder. Below mention is the snapshot for the same. I am having a product style code in Column A2:A301 from 1 to 300, and I want get picture in next cell ie column B2:B301 based on cell value A2 from a selected folder.
A B
Style_code Picture
1
2
3
4
I went through all the forums but confused a little. In the work sheet I want Excel to find an exact word such as letter "a" in all over the work sheet (not a column name) and paste it to the destination work sheet. I am attaching an example file, can some help me to solve the problem.
View 9 Replies View RelatedI have a program that automatically exports info into excel as that info becomes available. What I need is to be able to insert into a cell the exact time that the information was inserted into excel. For example, cell A1 gets info inserted into it, I need cell B1 to automatically insert the time that the info was inserted into A1. Any time there is new info inserted into A1, B1 needs to update that corresponding time.
View 2 Replies View RelatedI have a football score system and wish to compare the values of various cells - 2 if possible, but more if not possible.
Essentially I have a list of predictions for the score of a game (e.g. 2-1, 1-0, 0-0, 2-2 etc) in a spreadsheet, and I have a cell where I enter the correct scoreline (e.g. 2-1). The way the points system works is that if the prediction is correct (i.e. 2-1) then that player gets 3 points. If the result/outcome is correct but the scoreline is incorrect (i.e. 1-0) then the player gets 1 point. If they result/outcome and scoreline are incorrect, then that player gets 0 points.
Ideally I would link to compare 2 cells - predicted score and actual score, where the format of the scores is entered as 2-1.
However, I feel this may be easier having to columns for the score - Column A = 2 Column B = 1. In this way the scores only need to be compared cell by cell, however they would need to be compared by value for the correct outcomes.
I'm populating a userform combobox this way :
For i = 1 To npoints
Me.Combobox1.AddItem i
Next i
Meanwhile I'm populating a cell with a value from a listbox:
Worksheet1.Cells(rowindex, 6).Value = Me.Listbox.List(listindex - 1, i)
I don't understand how to make this return TRUE:
Worksheet1.Cells(rowindex, 6).Value = Me.Combobox1.Value
I tried playing around with format( , ) but without success.
I have a quick question: I want to compare two cells' formats with as short programming as possible, so the program runs faster.
I have the current code to compare the formats and give the variable "Result" the value "FormatChange" if the formats are different.
To make a long story short, I'm trying to compare formulas. I was able to copy the formulas as values.
There are hundreds of lines, each one with the formulas pasted as values, like '=SUM(G132:I132) / G30. What I want right now is to compare the text.
So, if for example:
the line for both parts of the pasted sum formula like '=SUM(G132:I132) / G30, I want a number 1 to be written in the adjacent cell (if '=SUM(G132:I132) / G30 is in A1, 1 should be written in B1).
However, if its is written '=SUM(G132:I142) / G30, than nothing should be written in B1.
Moreove, the line could have from 1 to characters. So it could be '=SUM(G1:I1) / G30 or '=SUM(G13200:I13200) / G30.
is the same, like of A1 is '=SUM(G1322), I want a number 1 to be written in B1
I am currently using excel 13' and am having trouble inserting rows once the value in column b changes. My goal with this procedure is to insert two rows after each change in value in Column b (i.e. b2, b3, and b4, all equal 123 however b5 equals 124) Below is the code.
Dim cell As Range
Set i = Range(Range("A1:I1"), Range("A1:I1").End(xlDown))
Set bsort = Range(Range("B1"), Range("B1").End(xlDown))
Set ISort = Range(Range("I1"), Range("I1").End(xlDown))
[Code]....
'Need to Identify which cells are not equal to the one above in column B (bsort = range)
For Each cell In bsort
If cell.Value cell.Value - 1 Then
ActiveWorkbook.ActiveSheet.EntireRow.Insert
ActiveWorkbook.ActiveSheet.EntireRow.Insert
End If
Next cell
End Sub
I want to be able to count how many instances Primary Price is >= Price 2. And, secondarily how many times Price 1 was, at a minimum, >= to Price 2 and then also >= Price Price 3.
Ultimately I want to compare Primary to 100 or so "Prices" over a years time
I figure it would be a sumproduct function, but can't get it dialed in
I have a list of names and a seperate list of names with emails.
In column A there is a last name, column B a first name, and then for the second list in column D there is an email.
I need to tell Excel that if column A and Column B both have a replication on the list, then in Column D populate it with the email address on the list.
I know this is confusing so I have attached a sample of my spreadsheet. The email address is in yellow and I need to have it copied to the cells in white. The list is almost 14,500 lines long and it would take forever manually.
I have a cell (F2) that is auto updated with total sales units for today (Its a simple counter of individual sales). I want to detect when there is a "batch" of sales >= 10. ie. F2 may start at zero for the day and increment by 1,2,5 or 10 units at a time. If the increment is 10 units or more I would like to detect this and store the result in cell G4.
Typical values in C2: 0, 1, 6, 7, 9, 19, 21, 22 etc as new orders arrive. The larger order between 9-19 (viz 10 or more), I need to detect and store in G4. I know that I need to use both the current value of F2 (say 19) and the previous value of F2 (say 9) to perform this, but the solution eludes me.
Can I run a macro from a cell function in Excel 2003 with the idea of
comparing 1 value against another and if its true, it gets highlighted yellow?
I am aware this question must have been asked to death on this forum and I already searched and found some answers but for some reason I can´t get it to work. I have two worksheets (sheet1 and sheet2). In Column E of Sheet1 I have product descriptions that I want to compare cell by cell to the product descriptions in Column F of Sheet 2. If they are not the same, color in the cell in Sheet 2. There are 1810 rows in both columns. I tried this method but it gives me an error (in spanish) that says that I cannot compare ranges of data.
I have also seen some code to do something similar (http://www.ozgrid.com/forum/showpost...85&postcount=3 ):
Sub find_cell()
Range("A:E"). Find(What:=Cells(2, 6).Value, LookAt:=xlPart).Activate
ar = ActiveCell.Row
ac = ActiveCell.Column
' the two lines above store the row and column values of the cell found
' in your example ar is going to be equal to 229 and ac is 3
' now this following lines are to change the colors to red
With Cells(ar, ac).Interior
.ColorIndex = 3
.Pattern = xlSolid
End With
End Sub
I don´t quite get the "Range("A:E").Find(What:=Cells(2, 6).Value, LookAt:=xlPart).Activate" part though.
Here is the qtn if two cells A1 and A2 has "ab 1" and "ab 2" the answers for comparing cells should be true as both cells has first 2 letters as alphabets then space followed by numeric..format of cells is same.
View 2 Replies View RelatedI'm trying to compare the values of columns B and G and if any of the cells are G < B, I would like to move the whole row into the second worksheet. And only if possible, it would be awesome if the macro could check column A for duplicates before the value comparison and sum up the column B if there are duplicates. In my example row 6 and 7 on column A have the same suppliers code and the amount totals to 2.
In this case for example, the value of the third row of G is lower than B, and therefore I would like the whole row 3 to be cut out from worksheet 1 and moved to worksheet 2.
Original view of sheet 1:
SUPPLIERSCODE
ORDERAMOUNT
PRODUCTNAME
BARCODE
SUPPLIERSCODE
WAREHOUSE STOCK
And then cut out the rows in which G
I have the need within a spreadsheet to automatically compare the value of 2 cells and if they match exactly to move the cursor to a group of cells. If they do not match then move to another group of cells. The only way that I can see to do this is via Macros. However I still need to do the automatic compare first.